Recommended 25-1/4" Long Leaf Springs
Updated 04/09/2025 | Published 04/05/2025
Products Featured in This Question
Question:
My trailer is 2022 GD Imagine 3100RD. The GAWR is 4400 lb. Its a tandem axle and I need to replace the springs. What if I use e44SR instead of DX95CR? Its a little thicker/stiffer. Ill also replace the equalizer with a MORryde suspension. 4-Leaf Double-Eye Spring for 5,000-lb Trailer Axles - 25-1/4 Long e44SR 4-Leaf Double-Eye Spring for 4,400-lb Trailer Axles - 25-1/4 Long DX95CR Thanks
asked by: Rob H
Expert Reply:
Hey Rob! Both the 25-1/4" long item # DX95CR and item # e44SR springs will work if you're replacing a 25-1/4" long leaf spring. They're close enough in capacity so long as you're not using too light of a spring with the 4,400 lbs item # DX95CR.
How did you measure your leaf springs to come up with needing a 25-1/4" long one?
Product Page this Question was Asked From
4-Leaf Double-Eye Spring for 4,400-lb Trailer Axles - 25-1/4" Long
- Trailer Leaf Springs
- Double Eye Springs
- 9/16 Inch Eye
- Nylon Bushings
- 4400 lbs
- 1-3/4 Inch Wide
- 4 Leaf
- 25-1/4 Inch Long
- Standard Grade
- Dexter
more information >
Continue Researching
- Search Results: trailer leaf springs
- Search Results: trailer suspension parts
- Shop: 4-Leaf Double-Eye Spring for 5,000-lb Trailer Axles - 25-1/4" Long
- Shop: 4-Leaf Double-Eye Spring for 4,400-lb Trailer Axles - 25-1/4" Long
- Search Results: morryde cre 3000
- Search Results: trailer tires and wheels
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps
- Search Results: torque wrench
- Shop: U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles - 7" Long U-Bolts
- Search Results: kenda karrier kr53
- Shop: MORryde Shock Absorbing Suspension Equalizers for Tandem Axle Trailers w/ 35" Wheelbase - 8K
- Search Results: sumosprings
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers w Correct Track - 2-1/4" Shackle Straps
- Shop: U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts
- Q&A: Can 3500 lb Leaf Springs Be Upgraded to Heavier Duty for a 2020 Grand Design Imagine 2400BH
- Video: Let’s Check Out the 4-Leaf Double-Eye Spring for 4,400-lb Trailer Axles
- Q&A: Looking for Replacement Bearing Kit for 2022 Imagine 2400 BH
- Video: Installing the Dexter U-Bolt Kit on a 2018 Grand Design Reflection Fifth Wheel
- Video: Complete Breakdown of the 4-Leaf Double-Eye Spring for 5,000-lb Trailer Axles
- Q&A: Recommended 25-1/4" Leaf Springs w/ 4 Leafs for a 5,000 lbs Axle
- Q&A: Selecting The Correct Cushioned Equalizer and Wet Bolt Kit For a Grand Design 2800BH
- Video: SumoSprings Trailer Helper Springs Manufacturer Demo
- Video: Installation of the Dexter E-Z Flex Suspension Kit - Enclosed Trailer
- Q&A: How to Determine Correct Leaf Springs For 2018 Jayco Travel Trailer
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Q&A: Choosing Between 4,000 and 5,000 Lb Leaf Springs to Replace 25-1/4 3,500 Lb Leaf Springs
- Q&A: Can Vehicle 7-Way Charge Batteries for Trailer Winch
- Article: How to Accurately Measure Trailer Leaf Springs
- Video: Detailed Breakdown of the U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles
- Video: Detailed Breakdown of the MORryde Rubber Equalizers for Tandem Axle Trailers
on Trailer Leaf Springs
Rob H.
4/9/2025
Thanks, Jerred! How can I reply? I measured it center to center, installed and under load at 25 3/4" I also measured: FHS, frame hanger spread ~61" Equalizer outer shackle spread 7 3/4" Shackle links 2 1/4" center to center Rob