Leaf Spring Replacement on 2021 Keystone RV Passport GT Series M-3400 QD
Updated 10/02/2026 | Published 09/27/2026 >
Products Featured in This Question
Question:
Trying to figure out which leaf spring i need for my 2021 keystone passport gt 3400qd. I have dexter 4400 axles and every spring measures 26.25 inches. However when I search it the recommended is 25.25 and it keeps popping up with 3500 lbs axles.
asked by: Steven B
Expert Reply:
Thanks for letting us help Steven. Based on the measurements you provided, I agree that your original leaf springs were most likely 25-1/4" long. That would make the 4-Leaf Double-Eye Spring for 4,400-lb Trailer Axles - 25-1/4" Long # DX95CR the correct replacement. Leaf springs will gradually flatten and elongate as they wear, so it's normal for an older 25-1/4" spring to measure longer than its original length. I'm assuming the 26-1/4" measurement you're getting is an eye to eye measurement. For the most accurate measurement, you'll want to either remove the spring from the trailer or jack up the trailer so the weight is completely off the suspension. You can also check the flat length of the spring. This measurement can actually be more useful with a worn spring because it's less affected by how much the spring has flattened. Measure along the top leaf from the center of one spring eye to the center pin. I've included a photo below showing exactly how to take this measurement. This will help us confirm the # DX95CR is the correct replacement.
I'd recommend replacing all of the leaf springs at the same time so the suspension remains balanced. While you're replacing the springs, you'll also want to replace the U-bolts with the U-Bolt Kit # APUBR-8. Each kit includes the mounting hardware for one axle, so you'll need two kits for your tandem axle trailer.
Are you considering replacing or upgrading any of your other suspension hardware while swapping your springs?

Steven
9/30/2026
Also just to verify. These are the correct parts for my bearing replacement. L68149, LM67048, L68111, LM67010. This things gonning to be almost new lol.

Product Page this Question was Asked From
4-Leaf Double-Eye Spring for 4,400-lb Trailer Axles - 25-1/4" Long
- Trailer Leaf Springs
- Double Eye Springs
- 9/16 Inch Eye
- Nylon Bushing
- 4400 lbs
- 1-3/4 Inch Wide
- 4 Leaf
- 25-1/4 Inch Long
- Standard Grade
- Dexter
more information >
Continue Researching
- Search Results: equalizer
- Shop: Go Power Overlander Solar Panel Expansion Kit - 200 Watts
- Shop: 4-Leaf Double-Eye Spring for 4,400-lb Trailer Axles - 25-1/4" Long
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs
- Shop: MORryde 14-3/4" Shock Absorbing Equalizers for Tandem Axle Trailers w/ 42" Wheelbase - 8K
- Shop: MORryde EzStor Lite - Removable Storage Bracket for Weight Distribution Hitches
- Shop: Grease Seal - Double Lip - I.D. 1.719" / O.D. 2.565" for 3.5K and 4.4K Axles - Qty 2
- Shop: U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles - 7" Long U-Bolts
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: trailer hitch
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Search Results: trailer tires and wheels
- Video: How To Choose Camper Leaf Springs
- Q&A: Best Suspension Upgrade for 33" Tandem Axles: Road Armor vs Dexter EZ Flex for Ember 22ETS
- Shop: Trailer Wiring
- Shop: Suspension Enhancement
- Video: In-Depth Look at the B&W 5th Wheel to Gooseneck Pin Box
- Search Results: trailer jack
- Q&A: Can I Use Heavier Rated Leaf Springs on Trailer Without Causing Damage
- Article: How to Accurately Measure Trailer Leaf Springs
- Shop: Brake Controller
- Video: Hands-On with the Hub Saver Hub and Wheel Protector
- Article: How to Tell the Weight Rating of a Trailer Axle
- Search Results: trailer wiring
- Q&A: Who Makes The Best Quality Trailer Bearings?
- Article: Most Popular Wheel Bearings
- Shop: Base Plate for Tow Bar
- Search Results: trailer leaf springs



Steven B.
9/30/2026
Yes I was thinking about upgrading the equalizer and adding wet bolts all around.