Recommended Leaf Springs, Shackle Kit, and Wet Bolts for a Trailer w/ 4,400 lbs Axles
Updated 12/22/2025 | Published 10/17/2024
Products Featured in This Question
Question:
@JerredH I got the measurements: Leaf Springs are 4-leaf, 25 1/4" eye to eye, unloaded. Axles are 4400 lb. Shackle straps are a little over 2 1/4" long hole center to hole center. (about 2.4" - maybe they are worn some?) I'm not finding the exact leaf spring replacement here (except maybe one that is pretty expensive compared to others). I do see a 25 1/4" 4-leaf spring that is for a 5000 lb axle. Would that be too stiff? Please let me know your recommendation for the leaf springs and the wet bolt upgrade kit. I'm looking at other solutions for a small lift. Perhaps a simpler "lift block kit". I see some on other sites that offer a 1" lift block with new U-bolts. I currently have about 2" from the top of the tire to the undercarriage.
asked by: Phil H
Expert Reply:
Hey Phil! Thanks for getting back to me with those measurements! We have a leaf spring that is an exact replacement but I am guessing it's the pricey one you referenced. It is the 4-Leaf Double-Eye Spring for 4,400-lb Trailer Axles - 25-1/4" Long item # DX95CR. This is a Dexter spring so you're going to pay a bit more for the quality that comes with that name.
If you wanted to go a little higher the TruRyde item # TRU25FR for 5,000 lbs axles wouldn't be overkill. Comparing the two though, I would go with the Dexter item # DX95CR. You'll get more life out of it and won't need to replace it as quickly.
As far as wet bolt upgrade recommendation, it's a MORryde kit all day. They are made in America and are a far superior product over the stock ones. The MORryde system replaces the plastic bushings with bronze bushings and the wet bolts have built in grease zerks that will allow you to grease the bushings. The correct one for your Keystone Cougar is the MORryde Suspension Upgrade Kit for Tandem Axle Trailers item # MR46ZR.
Can't speak to the lifting blocks as that is not something we sell. I do recommend you verify that using them does not void any warranties. 2" is a bit short I will say. We recommend 3" - 4" minimum. The Correct Track Trailer Alignment and Lift Kit item # RR23QX is the only option I have for you.
Product Page this Question was Asked From
4-Leaf Double-Eye Spring for 5,000-lb Trailer Axles - 25-1/4" Long
- Trailer Leaf Springs
- Double Eye Springs
- 9/16 Inch Eye
- Nylon Bushings
- 5000 lbs
- 1-3/4 Inch Wide
- 4 Leaf
- 25-1/4 Inch Long
- Standard Grade
- EMCO
more information >
Continue Researching
- Shop: 4-Leaf Double-Eye Spring for 5,000-lb Trailer Axles - 25-1/4" Long
- Search Results: trailer leaf springs
- Search Results: emco trailer leaf springs
- Shop: 4-Leaf Double-Eye Spring for 5,000-lb Trailer Axles - 25-1/4" Long
- Shop: U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles - 7" Long U-Bolts
- Search Results: morryde alltrek 4000
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps
- Shop: 4-Leaf Double-Eye Spring for 4,400-lb Trailer Axles - 25-1/4" Long
- Shop: 4-Leaf Double-Eye Spring for 5,000-lb Trailer Axles - 25-1/4" Long
- Search Results: trailer suspension parts
- Search Results: 4000 lbs trailer leaf springs
- Q&A: How to Lift a 5th Wheel Trailer
- Search Results: morryde cre3000
- Search Results: 4400 lbs trailer leaf springs
- Video: Review of TruRyde Trailer Leaf Springs - Double Eye Springs - TRU25FR
- Video: Review of Lippert Trailer Suspension Parts - Equalizer Upgrade Kit - LC53CK
- Shop: Lippert Road Armor Shock-Absorbing Equalizer Kit - Tandem Axle - 3,500-8,000 lbs
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Video: Easy Grease Trailer Hub/Drum Assembly for 3.5K Axles Review
- Shop: Transmission Cooler
- Q&A: Can I Use Heavier Rated Leaf Springs on Trailer Without Causing Damage
- Video: Review of EMCO Trailer Leaf Springs - Slipper Springs - EM78UJ
- Video: Installation of the etrailer Trailer Hub and Drum Assembly AKHD-545-35-K
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Can I Upgrade My 3,500 lb Leaf Springs To 5,000 lb Springs If The Measurements Match?
- Shop: Suspension Enhancement
- Q&A: How To Determine Hanger Spacing For A 2-1/4" Long Leaf Spring
- Q&A: Looking To Replace My Current WFCO Converter, What Do You Recommend?
- Video: Review of Progressive Dynamics Replacement Section AC/DC Power Distribution Panel - PD4655V
- Q&A: Replacement Brakes and Bearings for Dexter Axle
on Trailer Leaf Springs
Jerred H.
12/22/2025
Hey Phil, how did things turn out with the Dexter leaf springs and the MORryde wet bolt kit for your Cougar? Did the setup give you the ride and lift you were hoping for? Your update could make it easier for the next person working on a similar suspension upgrade.