Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
18" L x 2" W; alternating red/white reflector tape; 8 strips; DOT certified; rated for 7 years of use
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we'll be taking a look at the Optronics 7" long white by 11" long red Conspicuity Reflective Tape in a quantity of four in 18" long strips, Part #RE418T. This also comes as a quantity of eight, Part #RE18T. The Optronics Conspicuity Reflective Tape comes in 18" long strips by 2" wide. This reflective kit is rated at over 600 candle power per square foot. It is also hermetically sealed and unbreakable. It does mount on flat, as well as, curved surfaces and it is DOT Certified, as well as, being rated for seven years of use. It also complies with the J1967 for vehicle conspicuity material. Now let's go ahead and go over here to our enclosed trailer and we'll show you how to put them on.
As you notice, this trailer does not already have the conspicuity tape installed on it, as it doesn't meet the federal requirements where it's needed. We're adding them to give us an extra safety feature and adding more visibility to others around us. We're going to go ahead and line it up right here along the bottom of the trailer. We'll first go ahead and clean the back area with just a little bit of glass cleaner and a paper towel. Now as you can see, the back has a split in it that allows you to easily pull it off. It also has a checkered style pattern that gives high visibility, as well as, reflectivity to it.
It lets you know right here that it is DOT compliant by having a DOT-C2 stamped right onto the strip. I will go ahead and line up where we want to put it, simply hold it in place and we'll peel back the small portion right here. Go ahead and take the backing and fold it over and press firmly in on the strip to make sure it adheres fully to the side of our trailer. Now, since four strips come with the package, we'll go ahead and apply the other three the same way we did this one. Now as you can see we've added significant reflectivity to our trailer by adding the Optronics Conspicuity Reflective Tape strips, Part #RE418T. .
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
Ratings & Reviews

Fluffy G.
2/11/2025
Still sticking and reflecting. Got these for protecting the hitch carrier from the maniacs on the road at night who just cut inout and not aware the carrier is there. I love that I didnt need to buy 500 roll of this stuff like is typically sold online elsewhere.


Bill M.
7/22/2014
I have been proud of the lights i put on the trailer,they are bright,they really dressed the trailer up,along with all the dot tape,everyone cant help but notice the trailer at night,thanks again for a good product

Chris H.
8/22/2017
I pulled them off to paint the trailer. They were difficult to pull away, which is good! Replaced them with the same thing after painting.

Mark S.
3/12/2015
No issues. Holding up well.

Peter J.
4/5/2017
Sold the trailer however, the new lights helped me to get my asking price.

Don P.
2/28/2018
I finally finished rewiring my trailer and I am very pleased with how the lights turned out. The LED lights look great and are very easy to get to if I ever have a problem.
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.







Jeff I.
12/28/2014
Have added a new wiring harness and side marker lights, trailer looks like a X-mas tree going down the highway. VERY REFLECTIVE. The NEW TRAILER JACK IS SOOOOOOOOOO MUCH BETTER THAN THE custom jack. ALL IS WELL HERE.