Product Experts Available Now!
Call 1-800-940-8924
Dutton-Lainson Boat Trailer Jack w/ Wheel - Sidewind - Swivel - 10" Lift - 1,500 lbs
(385 reviews)
Price: $149.77
In Stock
We'll connect you with nearby partnered installers who know this exact setup.
Dutton-Lainson Boat Trailer Jack w/ Wheel - Sidewind - Swivel - 10" Lift - 1,500 lbs
Part Number: DL67MR
In Stock
$149.77
Retail:$163.84
You Save: $14.07
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
We'll connect you with nearby partnered installers who know this exact setup.
- All Info
- Reviews (385)
- Q & A (0)
- Photos
- Used (1)
Dutton-Lainson Trailer Jack - DL67MR
Highlights
- 1,500-Lb Capacity: 10" lift easily raises and steadies small boat or utility trailers.
- Smooth 360° Rolling: 8" caster wheel swivels fully, letting you guide and park trailers by hand.
- Corrosion Proofed: TUFFPLATE zinc finish resists rust for 500 hours in salt spray—ideal for marine use.
- Quick Swing-Up Design: Swivels up for travel and locks down fast when positioning or storing.
- Easy Sidewind Crank: Handle turns clear of posts and boxes so your hand doesn’t get pinched.
- Bolt-On Fitment: Mounts securely to frames up to 3" x 5" with included bracket and hardware.
Features to know about
Smooth Trailer Maneuvering: 8" Wheel with 360° Swivel
Moving a trailer by hand can be a workout, especially when you’re trying to tuck it into a tight storage spot or hitch up solo. The Dutton-Lainson swivel jack’s 8" caster wheel rotates a full 360 degrees, making it easy to guide your trailer exactly where you want it. The wheel design and separate bearing help it roll smoothly on pavement or concrete without binding, so repositioning your boat or utility trailer feels controlled instead of awkward.
Ready for Salt and Spray: TUFFPLATE Zinc Finish with 500-Hour Salt Spray Rating
Corrosion is the silent killer of trailer jacks, but this one fights back with Dutton-Lainson’s TUFFPLATE zinc finish. It’s a triple-layer coating—zinc, chromate, and sealer—that resists rust and holds up through saltwater exposure and harsh weather. Tested to a 500-hour salt spray rating, it outlasts traditional zinc and powder coat finishes. Even after seasons of use near the coast or on salted winter roads, the jack stays clean and functional instead of turning blotchy or crusted with rust.
Reliable Lifting Power: 1,500 lb Capacity with 10" of Lift
Getting your trailer to the right height shouldn’t take forever or leave your arm sore. This sidewind jack gives you 10" of lift and supports up to 1,500 lbs of lift capacity. The handle turns smoothly and stays clear of your hand thanks to the offset sidewind design, so you can raise or lower your trailer with less strain. The J-bolt handle helps you position the jack quickly, and the swing-up action locks it out of the way during towing to keep your setup streamlined.
Built for Real Use: Durable Steel and Bolt-On Mounting
This jack doesn’t flex or wobble under weight. Its steel construction provides dependable strength for small boats and utility trailers, and the included mounting bracket fits frames up to 3" wide x 5" tall. Installation is straightforward—just bolt it around the trailer frame using the provided hardware. Once it’s on, you can trust it to hold steady whether your trailer’s parked for the season or being moved around the driveway.
Long-Term Confidence: 3-Year Limited Warranty
A jack you use this often should be one you don’t have to worry about. Dutton-Lainson backs this model with a 3-year limited warranty, giving you peace of mind that its build quality and corrosion resistance are made to last through years of loading, launching, and parking.
Specs
Application
- Application: trailer frames up to 3" wide x 5" tall
Weight and Capacity
- Lift capacity: 1,500 lbs
Dimensions
- Bracket height (retracted): 13"
- Bracket height (extended): 23"
- Lift: 10"
- Bracket dimensions: 5-1/2" wide x 6-3/4" tall
- Clearance: 13" from mounting bracket to top of jack
- Inner tube diameter: 2"
- Outer tube diameter: 2-1/4"
- Wheel dimensions: 8" diameter x 2" wide
Warranty
- Warranty: 3-Year limited warranty
22802 Dutton-Lainson Trailer Jack - Swivel - 10" Lift - 1,500 lbs
Alternate Part Number: 6851
Compare to Fulton FXP10W0301
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Arrived Damaged
- Wrong item was ordered
Ratings & Reviews
4.7
385 reviews
by:
Amy
06/17/2026
This is a very sturdy trailer jack with a really nice wheel. The handle also turns very smoothly. It is much better quality than my last one that was another brand.
by:
Steven
06/29/2026
Great communication, quick turn around. The trailer jack was easily installed and is working well now.
by:
Tom
11/13/2026
solid purchase, easy to install
by:
Daniel
10/24/2025
A fairly complicated install but fortunately my B I L is very handy. He had to drill out the holes comparted to my old smaller capacity jack. And you have to remove the hole section of the trailer to do so. Seems to work great so far.
by:
Carole
10/06/2025
We bought it for our 18" Tracker boat trailer. Works perfectly. I have no problem using it to hitch to our truck and I am a 70 year old female. Great product. I would recommend it.
by:
Wayne
09/22/2025
Great Jack. Built for heavy duty work. Put on my Ranger Boats Trailer to replace the original for half the price of a new one from Ranger. Highly recommend. etrailer is an Excellent company to work with. Couldn’t be happier.
by:
Thomas
01/23/2026
Everything inside the box was in good shape. But the box came with holes in it. Luckily all parts were inside.
by:
Thomas
01/20/2026
Arrived on time. Works as it should, no complaints, and best of all it’s made in the USA!
by:
David
07/08/2025
I have one of these trailer jacks on my Florida boat trailer. It is very strong and stable. So, I ordered another for my boat in Massachusetts.
by:
Steve
10/28/2025
Great product, Also amazing communication along with fast shipping.
by:
Bela
09/03/2023
Ed was excellent. The trailer jack was sent quickly and works perfectly for my application. I have in on a Nautique boat trailer
Bela
9/4/2024
Works Perfectly, Easy to Install and sturdy. Exactly what I needed.
by:
Mark
06/01/2025
Makes moving my boat trailer a breeze! Love the swiveling wheel.
by:
Chadwick
04/26/2025
Replacement for bent trailer jack. Perfect!
by:
John
07/10/2024
The existing Dutton-Lainson jack on my Ranger trailer didn't drop low enough to put the trailer onto my truck hitch. Ranger has a bolt-on plate welded to the trailer frame, but the bolt holes don't match a standard jack. The e-trailer product details helped find a new jack of the correct height that would bolt to the old jack's mounting plate.
by:
David
06/27/2024
Timely delivery and follow up. This item was purchased to replace a 10 year old OEM jack on a Livin’ lite quicksilver 8.0 tent camper. The jack has more capacity than needed for this very light trailer, but I purchased because it has a separate bearing for the wheel to rotate. That feature plus the bigger wheel makes it so much easier to move the trailer in the driveway when unhitched. Good upgrade.
by:
Ralph
08/17/2022
Perfect fit for my trailer. And etrailer kept me up to date with shipping status on the backorder. Really great customer service. Thank you!
by:
Df
01/14/2025
Quick shipping, heavy duty made in USA worth the extra money.
by:
Bruce
09/14/2023
etrailer is far and away the best internet business I have done business with. Great service, extremely fast shipping. Exceptional shipping information on the website. I am recommending this company to all.
by:
Joseph
05/09/2024
Great replacement for my rusted jack. Fast delivery and arrived super fast. Highly recommend etrailer for all your boating, rving and truck needs.
by:
Boater
05/05/2023
Have not used it yet. Need to cut the welded Fulton bracket off my trailer
first. The trailer looks heavy duty; time will tell how durable it is.
first. The trailer looks heavy duty; time will tell how durable it is.
by:
Christopher
08/07/2023
I used this on a 2011 ranger trail that has the center mount jack. I removed the outer tube and put my center mount tube on. Worked great
by:
Randy
09/16/2022
It appears to be very sturdy. Easy installation. Only time will tell how well it performs
by:
James
04/12/2023
The box came damaged. it looks like it still works. The fastners were not in the bag and loose. Luckily they were all there.
by:
Burney
11/30/2021
Plenty of beef for my 21 foot Key West. Much stronger than the small jack that came with my Magic Tilt trailer
by:
Tom G
12/04/2024
This product is just right for my trailer, but beyond that the etrailer service was excellent. I had ordered a wheel that wasn’t a good fit; a consult with etrailer staff led to an easy return, great advice about the correct product, and a great suggestion about an easy mod that made the new wheel a perfect fit.
Brooke M.
12/9/2024
That is WHEEL-Y great you ended up with a good fit, Tom! Thanks for choosing us. Are there any other projects we can help you with?
25
385
true
Show More Reviews
See what our Experts say about this Dutton-Lainson Trailer Jack
- Replacement Trailer Jack Recommendation for Dutton-Lainson Jack on Ranger TrailerWe definitely have some trailer jacks you can use as a replacement for your Dutton-Lainson but it doesn't look like anything we have will work as a direct replacement. If you'd like to stick with the Dutton-Lainson brand then I recommend checking out the Swivel Marine Trailer Jack with Caster Wheel # DL67MR which is a bolt-on installation and rated for 1,500 lbs. Attached is a review video for you to check out.
view full answer...
- Looking for Replacement Jack for 2019 Ranger 2510 Boat TrailerHey Phillip, I pulled up several pictures of your 2019 Ranger 2510 boat trailer and it appears to have a Dutton Lainson jack with caster wheel like the # DL67MR. This would be a great option for an exact replacement. If what you have is different though let me know and I'll see what you would need.
view full answer... - Is There Zerk Fitting for Greasing Foot of Dutton Lainson Boat Trailer JackHey Steve, are you referring to the bearing that is in the rotating foot of the Dutton Lainson Boat Trailer Jack part # DL67MR that you referenced? If so, there isn't a zerk fitting down by it for greasing it. I'd spray white lithium grease into the rotating foot area using a straw to direct it and that would be adequate.
view full answer... - Replacement Handle For A Dutton-Lainson Boat Trailer Jack w/ Wheel # DL67MRHey George, The Dutton-Lainson Boat Trailer Jack w/ Wheel # DL67MR uses part # DL88XR for the handle. To replace the handle you'll need to pop off the cap on top and pull the little shear/roll pin you can see sticking up from the gear in the picture below. You can then pull the handle out and swap in the new one. Now would also be a great time to lube up the gears with some marine grease # L74FR to keep them working and protected from any water that could've potentially got inside the jack.
view full answer... - What is the Warranty for the 1.5K Dutton-Lainson Boat Trailer Jack w/ WheelHey Mandy, thanks for reaching out! The Dutton-Lainson Boat Trailer Jack w/ Wheel # DL67MR has a 3-Year Warranty. We had old info on our site but we've got it updated now!
view full answer... - How Much Lift/Travel Does the Dutton-Lainson Swivel Marine Trailer Jack 22802/6851 HaveThe travel of the Swivel Marine Trailer Jack with Caster Wheel part # DL67MR is 10" per the technical drawing from Dutton-Lainson which I have attached below.
view full answer...
- Replacement Trailer Jack For a Trailstar Tracker 175 Boat TrailerThe Swivel Marine Trailer Jack with Caster Wheel # DL67MR is a great replacement for the factory jack if you plan on using the caster on smooth surfaces. If you're using the jack to push the trailer around on rougher surfaces or dirt/grass the Xtreme Off-Road Swing-Up Trailer Jack # ORJW750D would be an upgrade. This uses dual wheels with rubber tires.
view full answer... - Where is the etrailer Swivel Jack # MJ-1500B-DWL Manufactured? While we do have some great U.S.A.-made boat trailer jacks, the etrailer Round Swivel Marine Jack # MJ-1500B-DWL is manufactured in China. However, for a super close U.S.A.-made model, I recommend the Dutton-Lainson Swivel Marine Jack # DL67MR. This jack comes with the same 1,500 pound weight capacity and a similar bracket heights of 13" (retracted) and 23" (extended). As far as compatibility, the jack fits trailer tongue heights up to 24-3/4" inches tall and square trailer tongues up...
view full answer... - Recommended Bolt On Jack w/ a Wheel for a 3 Inch x 2 Inch Trailer Coupler We've got a couple of options for jacks with a wheel that will bolt to your 3" x 2" trailer tongue. Both have the ability to swivel up when you are towing your trailer. Which one you choose is going to depend on the terrain you store your trailer in. I have listed them below and included a couple of review videos so you can see them demonstrated: Swivel Marine Trailer Jack with Caster Wheel - Bolt On - Sidewind - 10" Travel - 1,500 lbs item # DL67MR Xtreme Off-Road Swing-Up Trailer Jack...
view full answer... - Boat Trailer Jack Recommended for a Coupler Height between 15 and 24 Inches HighYes! For a boat jack that is similar to the # DL67MR that provides you with the smaller capacity you need, that is the Swivel Marine Trailer Jack with Caster Wheel - Bolt On - Sidewind - 10" Travel # DL84MR. The bracket height from the top of the bracket to the ground is 15-1/2" when retracted and 25-9/16" when extended. With this height range, that fits into your coupler height requirements. As far as compatibility, the jack fits maximum trailer tongue heights of 24-3/4" and fits square...
view full answer... - Replacement For Fulton Trailer Jack On Boat TrailerHey Miles! The Fulton adapter plate would normally be a good solution for this situation. However, Fulton is currently up for sale following the First Brands bankruptcy so most of their jacks and parts aren't around. At this point, we don't know if or when their parts will return. I can't tell from the photos exactly how much space is available between the trailer tongue and the reinforcement welded to the opposite side of the tongue. If there is enough clearance, you may be able to install...
view full answer... - Need Boat Trailer Jack For 3" Wide Frame And 5" Tall Frame On TrailerHey James! The Ark Xtreme Off-Road Swivel Trailer Jack w/ 2 Wheels # ORJW350D you were looking at fits frames up to 6" tall, so that would work just fine on your 3" by 5" frame. That said, the included bolts are only 2" long, so you'll need to source longer bolts for the 3" wide frame. Those will be universal and easy to find for a few bucks at a local hardware store, but I know it's unfortunate that you need to go through that trouble. If you want to save the time and trouble, you can...
view full answer... - Replacement Independently Turning 6" Jack Wheel that fits a 2" Jack Tube There sure is Fred and welcome back. The Removable 6" Wheel for Dutton-Lainson A-Frame Trailer Jacks item # DL22539 has the ability to rotate independently from the jack. It is designed to fit jacks that have inside a 2" diameter jack tube. The wheel assembly is zinc coated for corrosion resistance and has a 1,250 lbs capacity. If you need to replace your boat trailer's jack, I recommend the Dutton-Lainson Boat Trailer Jack w/ Wheel item # DL67MR. This jack has an independently turning...
view full answer... - Recommended Boat Trailer Jack w/a 8" WheelIt does not Tim but I have some other ones that do. The Dutton-Lainson Boat Trailer Jack w/ Wheel item # DL67MR is going to be the closest comparable one. It has a 8" wheel, includes a mounting bracket that works with trailer frames up to 3" wide x 5" tall, has a 1,500 lbs capacity, provides 10" of lift for a total height of 23". What kind of boat trailer do you have and how heavy is it once you're all loaded up? You can add this information, along with any other questions you have,...
view full answer...
Do you have a question about this Trailer Jack?
Used Items Available
Condition: Badly Dinged
Notes: Item has minor cosmetic dings on the top.
Info for this part was:
Expert Research:
Jameson C
Video Edited:
Chris R
Updated by:
Wilson B
Updated by:
Mike S
Updated by:
Alex H
Updated by:
Michael B
Updated by:
Carrie F
Updated by:
Ryan F
Written by:
Matthew S
Edited by:
Daron K
Installed by:
Aidan B
Video by:
John S
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Nick S.
11/3/2025
It is always nice to have someone handy in your back pocket. Besides the installation I am glad to hear the jack is working well for you. What kind of trailer did you end up installing it on?