See what our Experts say about this CURT Trailer Hitch Ball

• Recommended Taller Gooseneck Hitch Ball Compatible with 2018 Ram 3500 Factory Pucks
  You are correct that the B&W Ball and Safety Chain Kit for Ram Underbed Gooseneck Trailer Hitch # BWGNXA2062 is taller at 5-3/4 inches above the bed. The hitch ball is only available in the kit as you stated. I reached out to my tech contact at Curt and the kit # C60692 will allow the hitch ball to fit your Ram but the safety chain anchors will not fit your Ram pucks. So what you want is the hitch ball # C60629 (and the Ram safety chain anchors # C60617 which came with your original...
  view full answer...
  
• Difference Between Curt Gooseneck Hitch Balls For 2024 Ram 2500 Puck Systems
  Hey Chris, I checked with Curt and they said the Curt Pop-In Ball # C60601 is compatible with Ram 2500 and 3500 OEM puck systems and Curt OEM-style goosenecks for those trucks, but not other gooseneck ball holes. The Curt Pop-In Ball # C60629, per Curt, is compatible with Chevrolet, Ford, GMC, Nissan and Ram puck systems and all Curt OEM-style goosenecks.
  view full answer...
• Will The Demco Recon Gooseneck-to-5th Wheel Trailer Hitch Fit On Curt Pop-In Ball # C60629?
  The Demco Recon Gooseneck-to-5th Wheel Trailer Hitch Adapter # DM8550045 will fit a gooseneck ball up to 5" tall from the bed. With the Curt Pop-In Ball # C60629 being 5-1/8" tall you should still be able to use the Demco Recon since the ball sits below the top of the bed rails where the Demco will sit.
  view full answer...
• Replacement Hitch Ball for 2002 Ford F-250 with Ford Style Reese Elite Rail Kit
  I believe the ball you are looking for is the Reese part # RP19311. This ball fits the Ford factory rail kits and the Reese Elite series gooseneck hitch/fifth wheel rail kits that actually ended up becoming the Ford factory rail kits. Since you have puck setup you have the Elite rail kit and the ball you'd need would be the # RP19311. I attached a picture of this hitch ball next to the socket it fits for you to check out and compare to what you have if you are unsure.
  view full answer...
  
• 3 inch Hitch Ball Fit for 2017 Ram 2500 with OEM Gooseneck Prep Package
  A 3 inch hitch ball that is compatible with your Ram OEM Gooseneck Prep Package is the Curt Pop-In Ball for Factory Chevy/GM, Ford, Nissan, and Ram Underbed Gooseneck Hitches - 3" # C60628. The polished chrome plating is corrosion resistant and has an attractive mirror finish plus it provides a gross towing weight of 30,000 lbs limited by the tow vehicle capacity of your Ram. If after measuring the gooseneck horse trailer you do find you need the 2-5/16", a solid option would be the Curt...
  view full answer...
• Factory Style Gooseneck Trailer Hitch For a 2023 Ford F-250
  The Curt Custom Underbed OEM-Style Gooseneck Trailer Hitch # C59VV is the closest to the factory prep Gooseneck hitch we carry that is confirmed to fit your 2023 Ford F-250. This uses the same OEM style Ball # C60629 but instead of requiring the adapters for the outer holes for safety chains this uses the more traditions spring mounted U-bolts to connect the safety chains.
  view full answer...
• Will the Curt OEM Gooseneck Ball Work W/ the Blue Ox Gooseneck-to-5th Wheel Adapter?
  I'm looking at your Curt Pop-In Ball for Factory Chevy/GM, Ford, and Nissan Underbed Gooseneck Hitches # C60629 and I'm not seeing any reason why you would not be able to use the Blue Ox Gooseneck-to-5th-Wheel Trailer Hitch Adapter # BLU52XR. The Curt # C60629 is just a standard 2-5/16" gooseneck ball which is a non high-rise ball, so it's going to work just fine with the Blue Ox Gooseneck 5th wheel adapter. As far as use with your Pullrite I'm not quite sure what you're meaning, but...
  view full answer...
• Is There A Safety Chain Kit That Will Fit Ford, Chevy, And Ram Factory Puck Systems?
  The Curt Safety Chain Loops # C60691 will work with Chevy, Ford, GMC, and Nissan factory underbed gooseneck trailer hitches. Dodge/Ram does use a different style puck though, so you will need the Curt Safety Chain Loops for Ram factory underbed gooseneck trailer hitch # C60617 for that. However, if you are looking for an all inclusive kit with the ball, safety chain loops, carrying case, and a cover for the gooseneck hole when the ball isn't in use, you will want to look at the kits I...
  view full answer...
• Greaseless Hitch Ball Compatibility with Factory Gooseneck Package
  The Rapid Hitch Adjustable, Aluminum Ball Mount Kit w/ 2 Greaseless Balls # AM3405 is a cool feature but is not available for any gooseneck hitch. The Curt Pop-In Ball for Factory Chevy/GM, Ford, and Nissan Underbed Gooseneck Hitches - 2-5/16" # C60629 or the Reese # RP19311 are the only options for that fit. If you want to reduce friction and noise, you can use the White Grease Hitch Ball Lube # 58117 but there is not a greaseless option at this time. The Replacement Nylon Cap for Greaseless...
  view full answer...
• Dimensions Of Curt Pop-In Ball for Factory Chevy Prep Packages
  I believe you are asking for the measurement from the top of the center portion of the ball to the top of the ball part # C60629 which is 3-1/2". The ball is designed to fit newer Chevy, Ford, GM, and Nissan Titan XD trucks with OEM truck bed puck systems. I do not believe the 2015 Chevy Silverado 3500 had the OEM prep package. If you have the Curt Gooseneck hitch part # C607-604 for the 2015 Chevy Silverado 3500 (aftermarket gooseneck hitch with below bed rails) and are looking for a...
  view full answer...
  
• Which Gooseneck Hitch Ball For 2018 Chevrolet Silverado 3500 DRW W/ Oem Prep Package
  I have another option for you, but the Curt Pop-In Ball for Factory Ford and Ram Underbed Gooseneck Hitches - 2-5/16" Diameter Ball # C60601 is only for the Ram and Ford trucks and will not fit your 2018 Chevrolet Silverado 3500 DRW with the factory prep package. Instead you will need the Curt Pop-In Ball for Factory Chevy/GM, Ford, and Nissan Underbed Gooseneck Hitches - 2-5/16" # C60629. If you are needing the gooseneck safety chain loops as well then I recommend just getting the complete...
  view full answer...
• What is Tallest Gooseneck Hitch Ball that Fits OEM Rail Kit of 2020 Ford F-350 with OEM Rail Kit
  The tallest gooseneck ball we offer that fits the OEM rail kit of your 2020 Ford F-350 is the B and W part # BWGNXA2061 which is about an inch taller than all of the other options including the two Curt part numbers you mentioned with the difference between them being the overall trailer towing capacity. The # C60627 has a 38k capacity and the # C60629 has a 30k capacity.
  view full answer...
• What is Tallest Gooseneck Ball that Fits Factory Rail Kit of 2019 Ram 3500
  The tallest hitch ball we offer that fits the factory gooseneck hitch rail kit of your 2019 Ram 3500 is the B&W ball part # BWGNXA2062 as it sits a total of 5-3/4 inches tall above the bed of the truck. Second place is the Curt # C60629 which is 5-1/8 inches above the truck bed. I attached pictures of both as well. I REALLY like the handle of the B and W ball too as it allows you to install/remove the ball without having to touch a greasy hitch ball.
  view full answer...
  
• Replacing Gooseneck Hitch Ball For Curt Hitch C60700 With Excessive Play
  First, thank you for the purchase of the Curt Custom Underbed OEM-Style Gooseneck Trailer Hitch # C60700, which does use hitch ball # C60629. And in regards to the amount of play, you are correct that 1/8" of play is more than you want; typically about 1/16" of play is considered normal. This is not the first time I've heard of this hitch ball being too loose and having too much play, and there is an option I recommend that is going to be better, from B&W: - B&W Ball and Safety Chain...
  view full answer...
• Is Andersen Ultimate Connection Adapter Compatible with Curt Pop In Ball # C60629
  If you had an Andersen Ultimate Connection that was designed to attach to a gooseneck ball the Curt Pop-In Ball for Factory Chevy/GM, Ford, and Nissan Underbed Gooseneck Hitches # C60629 would be compatible with it.
  view full answer...
• Shank Dimensions of Curt Pop-In Gooseneck Ball for Ford, GM, and Nissan Factory Gooseneck Hitches
  The Curt Pop-In Ball, part # C60629, has a shank with a diameter of 2-1/4 inches and is 3 inches long. It's designed specifically to fit the factory gooseneck hitches that are an option with newer model Fords, GMs, and Nissans. If this is what you have then the hitch ball will fit your truck. If you have a different model truck, or don't have a factory gooseneck hitch, let me know what you have and I'll see if we have a ball that will work for you. For example if you have a Ram with...
  view full answer...
  
• Can Convert-A-Ball 5th-Wheel-to-Gooseneck Adapter Fit with Curt Pop-In Gooseneck Hitch Ball
  The Convert-A-Ball Cushioned 5th-Wheel-to-Gooseneck Adapter # CAB-C5G will damaged the integrated latch on the top of the Curt Pop-In Ball # C60629 so for your application I recommend using the B&W Ball and Safety Chain Kit # BWGNXA2061 instead. This hitch ball has a lever that rotates on the sides of the hitch ball body instead of an integrated latch which means it cannot be damaged by the adapter. Attached are some videos for you to check out.
  view full answer...
• How Tall Is The Standard Height Hitch Ball For A Ford Puck System
  The Curt Pop-In Ball for Factory Underbed Gooseneck Hitches part # C60629 is 5-1/8" from the base where it sits on the bed floor to the top of the hitch ball. However, this hitch ball has a taller base than normal. I am not sure there is an exact standard height for all gooseneck hitch balls but we do have the Curt Pop-In Ball for Factory Underbed Gooseneck Hitches part # C60601 which has more of a standard base and only measures 4" from the base where it sits on the bed floor to the top...
  view full answer...
• Tallest Gooseneck Hitch Ball Option for a 2017 Ford F-350 with OEM Gooseneck Hitch
  The tallest hitch ball that will fit in the OEM gooseneck hitch on your 2017 Ford F-350 is the Curt Hitch Ball # C60629 which has a measurement of 5-1/8 inches from the top of the shank to the top of the hitch ball itself. This comes in the Kit # C60692. If your pin box is sitting slightly above 5 inches then you should be good to go as we recommend a height of 5-6 inches between your bed railing and the pin box. However, if it is slightly lower then you will need to change your towing...
  view full answer...
  
• Will There be Play For Curt Pop-In Ball on 2020 GMC Sierra 3500 With OEM Puck System
  Thank you very much for your purchase from etrailer of the Curt Pop-In Ball for Factory Chevy/GM, Ford, and Nissan Underbed Gooseneck Hitches - 2-5/16" # C60629. There will be some play in the ball when installed in your 2020 GMC Sierra 3500; it shouldn't be much though, about 1/16" of play between the ball and the bed is considered normal.
  view full answer...
• Are the Gooseneck Hitch Balls the Same for a GM and Ram Puck System
  Yes, the pop-in style gooseneck trailer hitch balls are cross compatible between the different factory puck systems from Ford, Ram, GM, and Nissan. For this, we have a few options such as the Curt Pop-In Ball part # C60629 which has a rise built-in or the Curt Pop-In Ball part # C60601 which does not.
  view full answer...
• Replacement Hitch Ball for OEM Puck Systems
  Hey Jim! If you're looking for a replacement hitch ball for the Curt Custom Underbed OEM-Style Gooseneck Trailer Hitch item # C60633, you'll want the Curt Pop-In Ball item # C60629. The Curt Pop-In Ball for Factory Chevy/GM, Ford, and Nissan Underbed Gooseneck Hitches item # C60629 will also work with the Ram puck systems if that's what you're needing a replacement for.
  view full answer...
• Correct Replacement Curt Gooseneck Hitch Ball for 2017 Ford F-350
  I am not sure if you have a Curt gooseneck hitch and are looking for a replacement ball or if you have a factory gooseneck hitch and are looking for a replacement Curt hitch ball but they are the same part either way, Curt Pop-In Ball part # C60629. The stuck ball is tricky, it is going to either take a bunch of lube or heat but most likely a combo of both with some force. There really aren't many tricks unless you have some sort of way to put a bunch of upward pressure on the ball like...
  view full answer...
• 5th Wheel to Gooseneck Adapter Compatible with Ford OEM Gooseneck System
  For your OEM Gooseneck on the 2017 F-250, the Convert-A-Ball Cushioned 5th-Wheel-to-Gooseneck Adapter - 12" to 16" Tall - 20,000 lbs # CAB-C5G will work. The plastic you referenced on the ball will wear down when using this adapter so I recommend using the Curt Pop-In Ball for Factory Chevy/GM, Ford, and Nissan Underbed Gooseneck Hitches - 2-5/16" # C60629 which has a metal adjuster that won't wear down.
  view full answer...

Do you have a question about this Trailer Hitch Ball?