Boat Trailer Jack Recommended for a Coupler Height between 15 and 24 Inches High

Updated 05/20/2022 | Published 05/07/2022

Products Featured in This Question

Dutton-Lainson Boat Trailer Jack w/ Wheel - Sidewind - Swivel - 10" Lift - Zinc - 1,000 lbs

(323)

$138.33

Dutton-Lainson Boat Trailer Jack w/ Wheel - Sidewind - Swivel - 10" Travel - Zinc - 1.5K

(323)

$153.48

Question:

I need to get a boat trailer jack with similar features as the DL67MR except that I only need 800-1000 lbs. The coupler height needs to be between 15" and 24 inches high. Do you have a recommendation for a USA manufactured with the above specs?

asked by: Robin I

Helpful Expert Reply:

Yes! For a boat jack that is similar to the # DL67MR that provides you with the smaller capacity you need, that is the Swivel Marine Trailer Jack with Caster Wheel - Bolt On - Sidewind - 10" Travel # DL84MR. The bracket height from the top of the bracket to the ground is 15-1/2" when retracted and 25-9/16" when extended. With this height range, that fits into your coupler height requirements. As far as compatibility, the jack fits maximum trailer tongue heights of 24-3/4" and fits square trailer tongues up to 3" x 5". To top it all off, this jack is 100% made in the U.S.A.

I went ahead and attached a video that walks you through the features and measurements.

expert reply by: Bob C