Product Experts Available Now!
Call 1-800-940-8924
Dutton-Lainson Boat Trailer Jack w/ Wheel - Sidewind - Swivel - 12" Lift - 1,500 lbs
(384 reviews)
Price: $214.50
In Stock
We'll connect you with nearby partnered installers who know this exact setup.
Dutton-Lainson Boat Trailer Jack w/ Wheel - Sidewind - Swivel - 12" Lift - 1,500 lbs
Part Number: DL22335
In Stock
$214.50
Retail:$278.34
You Save: $63.84
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
We'll connect you with nearby partnered installers who know this exact setup.
- All Info
- Reviews (384)
- Q & A (0)
- Photos
Dutton-Lainson Trailer Jack - DL22335
Highlights
- 1,500-Lb Lift Strength: Handles heavy utility or boat trailers with 12" of lift for steady clearance.
- Wide-Track Wheel: 3-3/16" surface width rolls easier on gravel or soft ground without sinking or dragging.
- Dual-Layer Corrosion Armor: TUFFPLATE zinc base and matte black powder coat stand up to saltwater and harsh weather.
- Quick-Swing Design: Swivels up and locks with a pull pin to stay clear while towing or storing.
- Smooth Sidewind Crank: 6-1/8" handle radius keeps hands clear and movement easy under load.
- Frame-Ready Mount: Bolts to trailer frames up to 3" x 5" with included bracket and hardware.
Features to know about
Smooth Trailer Moves: Extra-Wide 3" Wheel Handles Soft Ground and Tight Spots
Dragging or wrestling a trailer into position is no fun, especially on gravel or dirt. The Dutton-Lainson jack’s 8" diameter x 3-5/16" wide caster wheel gives you a big footprint for rolling instead of sinking. It turns a full 360 degrees for easy maneuvering in garages, driveways, or campsites. Whether you’re parking on pavement or soft ground, the wide wheel keeps things steady and makes moving by hand noticeably easier.
Built to Last: TUFFPLATE Zinc and Black Powder Coat Fight Rust
Saltwater, rain, and road grime destroy lesser jacks fast. This one’s built with two protective layers—first a TUFFPLATE zinc finish with a 500-hour salt-spray rating, then a matte black powder coat that shields against UV and corrosion. Drain holes at the bottom of the inner post keep water from collecting, and the all-steel construction holds its shape through years of use. Even in harsh marine environments, this finish holds up long after ordinary coatings give out.
Quick Swivel Action: Pull-Pin Design Keeps You Moving
When it’s time to tow, the jack swings up and out of the way in seconds. A 1/2" diameter pull pin lets the whole unit pivot smoothly, so there’s no dragging or disassembly. The sidewind handle has a 6-1/8" radius that clears your knuckles when cranking, and the jack gives you 12" of lift to hook up or level easily.
Heavy Duty Where It Counts: 1,500-lb Lift Rating with Solid Mounting Fit
A solid mount makes all the difference when you’re supporting real tongue weight. This jack bolts around frames up to 3" wide x 5" tall using the included bracket and hardware. The mounting plate’s 7/16" holes are spaced 5-1/2" across with 2-3/8" and 1" separations from top to bottom for a snug, precise fit. With a 1,500-lb lift capacity, it’s strong enough for most boat and utility trailers, dependable enough to stay that way for years.
Easy Operation: Smooth Sidewind Crank and Clean Look
The side-mounted crank turns easily under load and gives smooth, controlled lifting. The black finish and rounded steel tube give it a clean, tough look that matches the rugged function. From installation through daily use, it’s straightforward gear that does what it’s supposed to—strong, stable, and ready to roll.
Specs
Application
- Application: trailer frames up to 3" wide x 5" tall
Weight and Capacity
- Lift capacity: 1,500 lbs
Dimensions
- Bracket height (retracted): 16-5/8"
- Bracket height (extended): 28-5/8"
- Lift: 12"
- Overall length (retracted): 29"
- Overall length (extended): 41-1/2"
- Wheel dimensions: 8" diameter x 3-5/16" wide
- Pull pin diameter: 1/2"
- Outer tube diameter: 2-1/4"
- Handle radius: 6-1/8"
Warranty
- Warranty: 3-Year limited warranty
22335 Dutton-Lainson Trailer Jack w/ 8" Wheel - Sidewind - Swivel - Bolt On - 12" Travel - 1,500 lbs
DLxP Series trailer jack
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Arrived Damaged
- Wrong item was ordered
- Did not arrive in time
Ratings & Reviews
4.7
384 reviews
by:
cjohnson
04/06/2026
I installed this on a vintage Airstream Trailer. I use the wheels a lot! Almost everyday on a hard surface and occasionally we have to push the trailer a distance. (like up to 100 yards) So, I need a good wheel. The wheel frame seems to be built well. It has welds, tight fittings and grease fittings for the mechanics and the wheel. The wheel is solid plastic, which I am hoping will last. But everything looks to be built to be replaceable / repairable. I have tried many over the years. This looks like a good solution for me.
by:
Paul
08/18/2025
There’s more beef to it than the Chinese version that I had on before. The Chinese and USA are both 12 lift jacks but the American version has more lift because of where the swivel is mounted on the jack.
You pay more but you are getting a better product.
You pay more but you are getting a better product.
by:
William
10/29/2026
Well built and much easier to move the trailer by hand than the OEM jack.
by:
Robert
06/22/2026
An upgrade from the original boat trailer jack and wheel. Exactly what I was looking for and fast delivery.
by:
Mike
04/24/2025
Just installed 4/22/25. Install was straight forward. Everything works as expected. It’s definitely an upgrade from the previous tongue jack.
Brooke M.
4/25/2025
Alright! Happy to hear that. When's the next boating outing?
by:
Steven M
01/08/2025
This trailer jack is a beefy workhorse. Very well made. Sturdy!
Steven M.
1/9/2026
Perfectly. Still works as new and looks that way also.
by:
Jack
05/16/2023
Seems like a great Dutton-Lainson jack. The large wheel makes it easy to move over obstacles in the parking lots.
Disappointed the mounting hardware seems a bit flimsy: my brackets bent when I tightened the bolts and I may have to replace them with thick steel bars with spacer holes to be safe. See attached pictures.
It seems like a minor and easy thing to get right and it wouldn't have added almost anything to the cost.
Disappointed the mounting hardware seems a bit flimsy: my brackets bent when I tightened the bolts and I may have to replace them with thick steel bars with spacer holes to be safe. See attached pictures.
It seems like a minor and easy thing to get right and it wouldn't have added almost anything to the cost.
by:
Todd
09/25/2026
Arrived quickly and was the pray I needed
by:
Terry
09/12/2025
Seems to be well built just received it and got it installed ready to test it
by:
David
01/13/2026
Fast shipping , great price
by:
David
03/17/2025
Very high quality part - only issue was that half of the bolt hardware was not in the box as the plastic bag it was in had split and somewhere along the way several bolts, nuts, and washers fell out. I was able to repurpose my old hardware from my boat trailer to make it work.
Victoria H.
3/19/2025
That shouldn't have happened David. Let me see what I can do to help make this right for you.
by:
Mike R
12/17/2020
I was looking for a heavy duty wheel jack and something I could easily relube since I put my trailer in the water frequently. I am very satisfied with this jack, it's easy to crank and very sturdy and has 2 zerk fitting to regrease. It is nice to be able to easily lube the screw. Most jacks only have a way to get to the top gear for greasing. I did note the jack mount position places the tongue height a little tall if you have a low vehicle or hitch. Luckily I moved to a truck and now it's works nice. However, would be nice to have ability to adjust height of the jack. I think Fulton is the only one that offers that, but the jack was not heavy duty enough.
by:
Chris
08/05/2022
You definitely get what you pay for. This Jack is built extremely well and works flawlessly.
by:
Mark F
10/03/2020
Good trailer jack. I have it on a bunk pontoon trailer and I needed a high lift so I could get the trailer to ride level and this jack has it. Also the wheel does not spin around when cranking down witch I like also jack has grease ports
by:
Ben
05/08/2024
I was expecting better. There’s a lot of slop in the mechanism. I use it on a smooth, flat concrete floor but still have to yank it around to change direction when trying to move the boat. The wheel would rather slide sideways than rotate much of the time. The height travel is also not enough and I had to put a block of wood in to get it to a usable place. Even then sometimes I have to lift up the boat by hand to release it from the hitch because it won’t go low enough. I can’t say I can recommend this one.
by:
Kurt
05/01/2021
We have a single axle trailer for our 19' fishing boat. It works good. We could have probably gone with an even bigger wheeled jack since we have to roll the boat around on the trailer a lot.
by:
Michael
02/28/2022
This was disappointing out of the box. First, this will not fit on a Magic Tilt aluminum trailer unless mounted sideways. The backing rails, which are properly sized, are five hole, but the face is four, and mounting sideways means bolts won't be flush with top and/or bottom of frame. This is clearly not the way this should be done, half the mount that should be against the frame is against nothing. Secondly, and most disconcerting, are the four carriage bolts that hold the mount swivel are about 1/16" too long, preventing the mount from laying flush against the trailer frame anyway. So I had to make a trip to the hardware store for replacement hardware, disassemble and reassemble with the shorter carriage bolts. Both of these issues just seem frustratingly odd. This replaced a $50 TS jack that salt did in after five years and is no longer made. The D-L has a much smoother motion, but after mounting it has the same amount of play when extended as the cheaper jack.
One last note, this was packed loosely in a large box. Some of the paint was already scuffed off the part that holds the wheel, so I'm not optimistic about the protection this "Tuffplate" finish offers if cardboard can remove it. The bag of hardware was still stapled, but two of the mounting bolts were loose and one of the split washers was just missing. I used a spare nylon locknut on that bolt.
It should not be this hard to find a decent, hassle-free jack at a decent price.
Pics of longer stock bolt beside shorter replacement, potential mounting gap that would cause, and jack mounted sideways on frame.
One last note, this was packed loosely in a large box. Some of the paint was already scuffed off the part that holds the wheel, so I'm not optimistic about the protection this "Tuffplate" finish offers if cardboard can remove it. The bag of hardware was still stapled, but two of the mounting bolts were loose and one of the split washers was just missing. I used a spare nylon locknut on that bolt.
It should not be this hard to find a decent, hassle-free jack at a decent price.
Pics of longer stock bolt beside shorter replacement, potential mounting gap that would cause, and jack mounted sideways on frame.
Jenny N.
3/9/2022
I will have our Customer Service team reach out to you. This jack is meant to work with trailers that have a frame height of 3 - 5 inches. The jack uses a 4 bolt plate to let you mount the jack to the trailer frame. You will want to make sure you are mounting it in a location along the frame where it not interfere with the operation of the trailer. I recommend watching the video that we have on the jack and watching from mark 1:30 to see where we mounted it to the frame.
by:
Fredric
11/26/2025
Great product, for bring around saltwater environment
by:
Kevin
08/09/2023
Strong, Sturdy, Extra Height, lots of compliments. Installed on a Shorelander trailer w/ 242 Yamaha boat. Replaced the inferior OEM jack. Bonus, I was able to install it on the drivers side. The OEM was on the passenger side. That was a pain having to climb over the trailer each time.
by:
Gary
06/01/2020
Easy installation, great gear reduction, smooth pivot. Just what I was looking for for my sailboat. Thanks!
Gary W.
6/1/2021
Its worked great. Continues to easily raise and lower my sailboattrailer. Boat+trailer ~2200 lbs.
by:
Mike
10/06/2025
great service and fast delivery
by:
Richard
09/22/2025
great product
by:
Michael
10/10/2025
Well made, smooth operation. Very nice!
by:
Brian
03/19/2020
Great Product,really heavy duty jack with a very nice handle and large wide wheel.
Would purchase again if need another. etrailer.com shipped fast and came undamaged.
Would purchase again if need another. etrailer.com shipped fast and came undamaged.
by:
Neil
01/24/2023
It's a quality built jack. This jack is heavy duty. So much better than what my trailer came with. The wide wheel works great on soft ground. Made in USA. Costs a bit more than the China made stuff but worth it if you want quality and reliability.
25
384
true
Show More Reviews
See what our Experts say about this Dutton-Lainson Trailer Jack
- Why Can't I Buy a Replacement Fulton Jack Anywhere? What Can I Replace it With?Hello Robert, Thanks for writing in! There's a good reason you've had a hard time finding that Fulton jack. Unfortunately, Fulton products are no longer being produced, so once the remaining inventory sold out, they became very difficult to find. Bummer, I know. I actually have Fulton products on my Ranger bass boat, so I understand the disappointment. I see you ordered the Dutton-Lainson Boat Trailer Jack with Wheel - Sidewind - Swivel - 12" Lift - Black - 1.5K # DL22335, and I think...
view full answer... - What Is The Mounting Plate Bolt Spacing For The Dutton-Lainson Boat Trailer Jack DL22335Hello Nick, thanks for reaching out. The Dutton-Lainson Boat Trailer Jack # DL22335 may work for you. It has 7/16" holes. They are 5-1/2" apart across. There is 2-3/8" between the top hole and the hole under it. Then there is 1" separating the lowermost holes. All of these measurements are taken center hole to center hole. I have included a picture that shows the spacing for your reference so you can see if this matches what you have. It will fit the 3"x4" frame easily. It comes with its...
view full answer... - Recommended Trailer Jack for a Karavan Boat TrailerHey Mike, as long as your trailer frame isn't larger than 3" x 5" then the Dutton-Lainson Boat Trailer Jack # DL22335 will work great as an upgrade. This jack has a nice 1,500 lb capacity, so it should be plenty to lift your trailer. What kind of boat do you have? I used to work in the industry so I'd be curious to hear what you have! Feel free to let me know if you have any other questions!
view full answer... - Recommended Replacement Weld on Trailer Jack for a Phoenix BoatHappy to help Joe, thanks for reaching out! From what you're looking to get out of a trailer jack, I'd suggest the Dutton-Lainson Boat Trailer Jack w/ Wheel # D22335. It has a large 8" x 3-5/16" single wheel, 1,500-lb capacity, their signature TUFFPLATE ZINC based corrosion protection and is one of the smoothest manual jacks for boat trailers. And yes, the DLxP supports both bolt-on and weld-on installation methods What style of boats do you carry on the Phoenix?
view full answer... - Recommended Adapter to Attach a Dutton-Lainson Boat Trailer Jack to a Fulton F2 Weld-On BracketThere sure is Jacob! To attach the Dutton-Lainson Boat Trailer Jack item # DL22339 to your boat trailer's welded on Fulton bracket, you'll need the Dutton-Lainson Adapter Plate for Fulton F2 Weld-On Bracket item # DL44DR. This adapter will bolt directly to the weld on Fulton bracket so you can attach your new jack without having to add new brackets. The Dutton-Lainson Adapter Plate for Fulton F2 Weld-On Bracket item # DL44DR works with DLx, DLx-P, DLx-SW, DLx-SF, 6430, 6800, 6850, and...
view full answer... - Mounting Plate Bolt Spacing For Dutton-Lainson Boat Trailer Jack DL22335Hello Justin. The mounting plate on the Dutton-Lainson Boat Trailer Jack # DL22335 has 7/16" holes. They are 5-1/2" apart across. There is 2-3/8" between the top hole and the hole under it. Then there is 1" separating the lowermost holes. All of these measurements are taken center hole to center hole. This will fit your trailer frame as long as it does not exceed 3" wide by 5" tall. I have a picture of the dimensions below, but with the bracket flipped on its side. I hope this helps.
view full answer... - Recommended Replacement Jack for a 2005 Ski Nautique TrailerHey Steven! I am not familiar with the mount you are describing so definitely send those pics to the email address you receive this response from. I'd love to take a look at them for you. The Dutton-Lainson Boat Trailer Jack w/ Wheel item # DL22335 you were looking at is pretty universal. It attaches to trailer frames that are up to 3" wide x 5" tall.
view full answer... - Dimensions of Dutton-Lainson Round Swivel Jack DL22335I have included a dimensional drawing of the Dutton-Lainson Round Swivel Jack # DL22335 that shows the overall extended height of the jack at 40-5/8" tall. This measurement is from the bottom of the wheel to the top of the jack when extended.
view full answer...
- Recommended Replacement Swivel Jack for Tracker Boat TrailerSince you'll be moving the trailer around by hand on a paved surface, you really wouldn't need a double wheel jack like the Fulton # F27CR. Dual wheels would actually make the trailer a bit more difficult to maneuver around by hand on a paved surface because the caster will be more difficult to turn. I'd recommend the US made # DL22335 Swivel Jack from Dutton-Lainson. The jack has a 1500 lb lift capacity which is more than needed for the pretty light tongue weight of your Tracker Pro Guide,...
view full answer... - Dutton Lainson Trailer Jack For Ranger Trail Boat TrailerHere is a Dutton-Lainson Round Swivel Jack # DL22335 it has an extra wide 3 inch wheel so it'll be easy to move around in any terrain and it will swing up to get out of the way. It fits frame sizes from 3 inches to 5 inches and has a 1,500 lb capacity. Check out the video of Jake using it to get a closer look!
view full answer... - What Is the Bolt Pattern Dimensions of the Dutton-Lainson DLx-P Round Swivel JackThe mounting plate on the Dutton-Lainson Round Swivel Jack part # DL22335 has bolt holes which are 7/16" diameter. The bolt holes are spaced 5-1/2" apart on center from top to bottom and then in 1" increments apart working your way from the bottom to the top. If your trailer frame does not exceed 3" wide x 5" tall then the jack will bolt right on.
view full answer... - Looking For Fulton Big wheel Trailer Jack For Boat TrailerHey William. I have a jack that could work for you, but the Fulton big wheel jacks you're talking about are no longer available, sorry to say. I think you'd like the Dutton-Lainson Boat Trailer Jack w/ Wheel - Sidewind - Swivel - 12" Lift - 1,500 lbs # DL22335. It's got a big 3" wide wheel which is wider than most, so it will give good traction and be easy to roll around. It's also zinc coated and powder coated to protect against the elements and water. Another boat-friendly option is...
view full answer...
Do you have a question about this Trailer Jack?
Info for this part was:
Edited by:
Tyler C
Video Edited:
Jacob T
Video Edited:
Kathleen M
Video by:
Chris R
Written by:
Matthew S
Updated by:
Alex H
Updated by:
Michael B
Updated by:
Carrie F
Updated by:
Ryan F
Installed by:
Jacob H
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Heather A.
4/11/2026
That’s a great setup, and I love hearing it’s going on a vintage Airstream. Sounds like you’re really putting that wheel to work too, pushing it around that often and even up to 100 yards is no small task. Glad to hear this one feels solid and built the way it should be, especially with the grease fittings and serviceable parts. That makes a big difference over time. That Airstream must be a cool rig. What year is it?