Arrives before Christmas To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.
Features:
Installation
This custom-fit T-connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side interior trim panels in your rear cargo area. Once you've plugged in the T-connector, run the hot lead up to the fuse panel near your car battery. Remove the fuse panel's cover and find the stud that has the red battery cable attached to it. Connect the hot lead to this stud using the included ring terminal. Then insert the included fuse into the integrated fuse holder.
Once installation is complete, the 4-way connector will be stowed in an out-of-the-way location within your cargo area.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
A tail light converter is built into this T-connector. This converter is a circuit-protected, battery-powered unit that bypasses the electrical routes that are used by a basic wiring harness. As a result, there is virtually no draw on your tail light circuits.
Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of the trailer. This converter combines the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.
Curt builds each tail light converter using surface-mount technology (SMT). This method of construction involves soldering electronic components directly to the surface of a printed circuit board. SMT eliminates the need for leads, which are used in older through-hole technology. The result is a circuit board that is smaller yet provides more routing area and that offers superior performance, reliability and durability.
Circuit boards constructed using SMT have been shown to perform better under rough conditions with excessive vibration than those made using the through-hole method. And where would vibration be more likely to occur than in towing applications? Curt converters also produce less heat, leading to increased durability and longer life. In addition, lower levels of resistance ensure better performance, especially for parts that operate at higher frequencies.
Each Curt circuit board is made using high-quality components that are pieced together in the most technologically savvy fashion, leading to greater predictability and reliability in functioning.
California residents: click here
Average Customer Rating: 4.8 out of 5 stars (18 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.Worked as it should
I bought the C56145 custom wiring kit it is a must have item. The dealer wanted $300 for the wiring kit + $ to install. I save a lot by doing it myself and thank "etrailer.com" for handling a fine product.
Respectfully,
Larry Royal
This product is exactly what I was looking for. No cutting and splicing, easy and clean install. What else is there to say? I highly recommend this harness for your trailer plug need.
Perfect fit connectors and very convenient to not need to splice into factory wires.
Everything was great with only one exception. The instruction state to be careful removing the wire connectors from the taillight. With no instructions on how to remove them. 1. Push the red sliding saftey clip back.
2. push down on the black clip and gently pull the socket apart using a side to side motion. Henry
I was able to do a quick and professional looking wiring installation with your kit. I would recommend it to others.
The wiring harness works great and was easy to install.
After buying four of these hitches in the last four years, what more could I say. I think that would have been recoginized by your company and been given a small discount for buying from you so frequently. Enough said about that. Frequent customer.
Thank you for shipping so fast. I already put the hitch on. and wiring is also installed. Good directions and great looking. Thank you again.
Super fast and easy install. 15 mins and it was in and ready
Everything worked as described. Quick delivery and even greater price.
This is just what I need easy to install better than cutting wires all that
Great service. Knowledgeable. Fast shipping. Great price
good
Plugs right in, easy.
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jim P.
4/21/2016
Everything is working well. Im glad to have etrailer my primary source for my towing needs. Respectfully,