Product Experts Available Now!
Call 1-800-940-8924
Dutton-Lainson Boat Trailer Jack w/ Wheel - Sidewind - 12" Lift - 1,500 lbs
(66 reviews)
Price: $169.86
In Stock
We'll connect you with nearby partnered installers who know this exact setup.
Dutton-Lainson Boat Trailer Jack w/ Wheel - Sidewind - 12" Lift - 1,500 lbs
Part Number: DL22210
In Stock
$169.86
Retail:$179.19
You Save: $9.33
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
We'll connect you with nearby partnered installers who know this exact setup.
- All Info
- Reviews (66)
- Q & A (0)
- Photos
Dutton-Lainson Trailer Jack - DL22210
Highlights
- 1,500-Lb Lift Strength: Handles heavy trailer tongues with a 12" lift for steady raising and lowering.
- Corrosion Defender: TUFFPLATE zinc inner tube with 500-hour salt spray rating shields against rust.
- Quick Positioning: J-bolt handle and smooth-swiveling 360° caster make tight-space moves easy.
- Built to Last: Durable steel frame with black powder-coat outer tube resists chips, UV, and weather.
- Easy Mount Fit: Bolts onto trailer frames up to 3" wide x 5" tall with included bracket and hardware.
- Low-Effort Cranking: Sidewind handle with cushioned grip and grease zerks keeps operation smooth.
Features to know about
Smooth Trailer Moves: 8" Wheel and 360° Swivel for Easy Maneuvering
Moving a trailer by hand shouldn’t feel like a wrestling match. The Dutton-Lainson jack’s 8" diameter x 2-1/4" wide spoked wheel glides easily across concrete or gravel, and the caster turns a full 360 degrees so it moves in whatever direction you push. The sidewind handle is smooth and comfortable, making small adjustments or full lifts easy. Whether you’re guiding a rig into a shed or repositioning it in the driveway, this setup eliminates the struggle of fighting a wheel that won’t turn.
Built for the Long Haul: TUFFPLATE Zinc and Powder Coat Protection
Boat ramps, salt air, and wet storage are tough on metal, but this jack is ready for it. The outer tubing has a matte black powder coat finish that shields against UV rays and corrosion, while the inner tubing carries Dutton-Lainson’s TUFFPLATE zinc finish with a 500-hour salt spray rating. Drain holes in the inner post prevent water buildup, and the combination of coatings outlasts typical zinc or powder coat finishes. It’s a rugged, marine-grade design built to stay smooth and rust-free season after season.
Steady Lifting Power: 1,500-lb Capacity with 12" Lift
With a 1,500-lb lift capacity and 12" of lift, this jack handles heavy tongue weights with confidence. The bracket height ranges from 16-5/8" retracted to 28-5/8" extended, giving plenty of adjustability for leveling or hitching. The J-bolt style handle allows you to position the jack quickly, and the side-mount design keeps it clear of winch posts or boxes. It’s a simple, strong setup that works exactly as expected every time you crank it.
Low-Maintenance Operation: Grease Zerks and Durable Steel Design
Keeping it running smoothly is easy. Built-in grease zerks make routine lubrication quick, while durable steel construction ensures it stays solid even with frequent use. The swivel design bolts around trailer frames up to 3" wide x 5" tall, and the included mounting bracket and hardware make installation straightforward. With quality gearing and a sealed design, this jack performs flawlessly and holds up over years of real-world use.
Specs
Application
- Trailer frame size: up to 3" wide x 5" tall
Weight and Capacity
- Lift capacity: 1,500 lbs
Bracket Height
- Retracted: 16-5/8"
- Extended: 28-5/8"
Lift
- Lift: 12"
Dimensions
- Pull pin diameter: 1/2"
- Outer tube diameter: 2-1/4"
- Handle radius: 6-1/8"
- Wheel dimensions: 8" diameter x 2-1/4" wide
Warranty
- Limited warranty: 3-Year
22210 Dutton-Lainson Trailer Jack w/ 8" Wheel - Sidewind - Swivel - Bolt On - 12" Travel - 1,500 lbs
DLx Series trailer jack
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Arrived Damaged
- Wrong item was ordered
- Defective
Ratings & Reviews
4.9
66 reviews
by:
Craig
01/02/2026
This trailer jack was a near perfect duplicate of the jack I replaced. The plastic top was the only noticeable difference. I looks great! It was easy to install! I’m looking forward to keeping this one in better condition over its life. Overall, I would recommend this product as a replacement up or down grade to your existing boat trailer jack.
by:
Jesse
08/06/2026
i purchased this as it was the same brand and size of the jack I was replacing. The original was 3 years old and no longer worked without extreme effort. The replacement was easy to install. I does have a little play in it when mounted but seems sturdy with load. It doesn't look like a better product than the original so I doubt it will last any longer. Cranking it is now functional with the new one but not as easy as I would hope for. it still takes considerable force to crank but doable where the one i took off stopped working without extreme effort. Im wishing I would have purcahsed a bigger one. maybe 2000lbs would have made a difference, not sure. I didnt see one that was bigger that looked like would mount up so I was safe and selected the same as before. Before and after pictures below. Etrailer shipping was great though. I have used Etrailer a few times and never have been disappointed in them.
by:
Bert
10/13/2026
I just mounted this new Jack to the front of my boat trailer. It feels very sturdy and the gear action is smooth. It comes with all the necessary hardware you need. I was easy to mount.
I like the fact that it has zerk fittings to make lubricating easy.
The wheel is large and sturdy
I like the fact that it has zerk fittings to make lubricating easy.
The wheel is large and sturdy
by:
Joseph
05/16/2025
Awesome product! So much better than the stock one that was there. The old jack wheel would slide and not turn on the concrete, this new one has no problem at all. Like that it's much larger and can be greased too.
Brooke M.
5/16/2025
Ooo, yeah you can really tell the difference in the side by side! Looks like an upgrade to me. Thank you for sharing the photos!
by:
Anonymous
02/16/2026
I purchased this to replace an existing jack that wasn't quite long enough. The new jack bolts on quickly, jacks up easily, and the trailer is more maneuverable with the large wheel.
by:
Brad
07/25/2024
Very well built jack and looks great too. Installation was a breeze. Your tracking information from the time of my order to the time it was delivered was awesome! Thank you for such great service
Brad D.
7/25/2025
Great. Very heavy duty
by:
David
07/09/2024
I just installed it and have not actually used it yet, but it looks to be extremely solid and well-made and I really appreciate the extended jacking height and the two ZR fittings to allow easy grazing.
The three year warranty, also speaks volumes about the confidence they have in this product
Glad I spent a little extra for this quality product and I think it's going to make life much much easier jacking about up and moving around
The three year warranty, also speaks volumes about the confidence they have in this product
Glad I spent a little extra for this quality product and I think it's going to make life much much easier jacking about up and moving around
David
7/10/2025
I have not used it much because of some issues with the boat, but it still looks like its brand new and cracks up and down very smoothly I dont doubt that its going to be a substantial improvement on my previous jack
Lazer S.
7/10/2025
@David Well that's a bummer, David. Hopefully you get your boat all squared away so you can go out and enjoy it!
by:
Stephen
08/29/2020
I was originally trying to find something that would bolt upto the Shelby welded bracket. I'm so glad I went with this unit instead. It's heavy duty, large wheel for easy maneuvers, greese fittings, easy up like butta! The black color is different and goes well with my red Stingray. The customer service is over the top!
by:
Mike
08/19/2025
This trailer jack is a huge upgrade from what my boat trailer originally came with. I love the fact that is has a caster style wheel so the boat can be easily moved around in my shop! I highly recommend it and to be honest this is all you need to spend to get a good quality jack.
by:
Brandon S.
10/07/2019
I love this jack! I bought it for my 1984 Ski Nautique single axle trailer. Works great and looks good.
by:
Garry
06/18/2025
Great jack makes unhooking my 2 boats a lot easier. Jacks that come with most trailers are low bid junk.
by:
Yar craft trailer
03/08/2026
Replaces the same from 09’ but a much nicer finish and zerts!
by:
Doug
10/08/2021
This jack is solid as a rock. Totally recommended. I did remove the wheel and just screwed the bolt back into the bottom of the tube for better clearance coming and going into steep driveways.
Doug
10/8/2022
This jack is perfect. Trailer popped off the hitch once my fault and the jack took it in stride with NO damage. Love it.
by:
Dan
10/11/2025
Well made in the USA
by:
Larry
08/21/2021
High quality and heavy duty jack. I’m hoping the quality and the grease zeros will make make this Jack last for a long time.
Larry
8/21/2022
Jack still working as well as when new. Just greased it for the first time recently. Great product! I’d recommend it again.
by:
Brett
06/01/2022
I bent my boat trailer jack accidentally and needed a new one. So etrailer was there for me with this very nice Dutton-Lainson version similar to the one I had. Works great, very smooth gearing, and it looks good on my boat trailer too.
by:
Scott
02/17/2023
Very nice jack. Seems like it’s well made. Mounting was easy. When the package arrived the mounting hardware was missing, etrailer immediately sent replacement mounting hardware and I got it in 2 days. As usual, excellent customer service from etrailer.
by:
Joe
08/24/2023
For a simple trailer jack, it doesnt get any better than this.
Joe D.
8/25/2024
it works very good. No problems. Im glad I upgraded to the taller jack. Now, all the water inside the boat runs our quick. This jack seems to be sturdier than the standard quality. Id buy it again.
by:
Mark
07/26/2024
what I like most about this jack is I push my boat around by hand alot in my boat shed.I bought this jack because my previous jack the wheel would not easily change direction I was constantly directing it with my foot. This jack will easily move towards the direction I am pushing no more sore toes.
by:
Peter
06/30/2020
The trailer jack is perfect! The price was reasonable and the product is quality. The jack shipped the day I ordered it and I had it in 3 days. It only took me 30 minutes to put it on my trailer. The 8" wheel makes moving my trailer a breeze. I would definitely recommend Etrailers!
by:
Brad
06/04/2025
Best jack I have ever used. Holds up nicely 2nd year no rust.
by:
Mike J
04/17/2020
The new design works great with my 2002 boat trailer. Nice that their design team keeps in mind older product replacement!
by:
Ed B
07/30/2019
The jack performs flawlessly so far. Highly recommend. Quality I expected
Ed B.
7/31/2020
It continues to perform well. I am pleased with my purchase
by:
Minneapolis
06/03/2022
As described. Was looking for something heavy duty and this worked!
25
66
true
Show More Reviews
See what our Experts say about this Dutton-Lainson Trailer Jack
- Best Bolt-on Corrosion Resistant Trailer Jacks for Boat TrailerI have a few options that may work for you, however, we are not aware of any stainless steel jacks on the market since the discontiuned SeaSense jack. Since you are using this jack with your boat, I recommend looking at the Fulton F2 Swing-Up, Wide-Track Trailer Jack # F1413040134. This jack features an aluminum alloy construction, and is made for marine, recreational and utility trailers. The inner and outer aluminum alloy tubes prevent rust even in the harshest environment. For a more...
view full answer... - Determining The Correct Replacement Hubs For A Dexter Eliminator Torsion AxleHi Ray, Without the serial number to look up the axle the only way to determine the correct replacement hubs would be to see if the face of the hubs has the part number stamped into them or to take some measurements. If you have to measure then we you'll need to use a digital caliper # PTW80157 to measure points B, C, and D from the diagram below. Then we just need to know the wheel bolt pattern to make sure the new hubs match up to the wheels.
view full answer... - Dutton-Lainson Boat Trailer Jack for Frequent Saltwater SubmersionHi Peter, t sounds like the biggest issue you're running into is the screw rusting out, rather than the jack's outer materials. With your trailer going into salt water every week, I'd look at the Dutton-Lainson Boat Trailer Jack with Wheel, Sidewind, 12" Lift, 1,500 lbs, part # DL22210, that you're considering. I like this option because it has a sealed design and quality gearing, which are important features when you're trying to get more life out of a jack that's exposed to harsh marine...
view full answer... - Replacement Mounting Bracket for a Dutton-Lainson Boat Trailer Jack DL22210Hey Hank, welcome back. You can email that picture directly to the email you receive this response from. I saw you previously purchased the Dutton-Lainson Boat Trailer Jack item # DL22210. What you're describing sounds like the Replacement Mounting Hardware item # DL22443. Are these the rectangular brackets you're referring to? You can add this information and any other questions you have where it says Reply to Jerred H and I'll be happy to answer them.
view full answer... - Snap Ring Swivel Jack for a Trailer that Already has a Jack MountJack # DL22210 isn't a snap ring jack but we do have other options that will likely work with your existing mount such as # FTJ120W0301. The hole spacing for the pull pin is 3 inches apart on center. I have linked a video review of this jack for you.
view full answer...
- Replacement Trailer Jack for my 2000 Ranger Bass Boat TrailerThe Fulton Jacks that have the 3"x5.5" bolt pattern are typically the center bolt thru style. For a replacement the Fulton Bolt-Thru Swivel Marine Jack part # F1411300301 is an excellent choice. It will replace the jack only portion of your current setup and is quite easy to swap out. It offers a 1500 lb capacity which will be perfect for your Ranger trailer. I've included a video below for you to check out. Happy Fishing!
view full answer... - Available Sizes of Trailer Jack Caster WheelsFor an industry-standard round tube jack the largest caster wheel we have is a 6-inch size made for a 2-inch trailer jack inner tube, like the Dutton-Lainson part # DL22539 you referenced. Most such caster wheels are rated for 1200-lbs. This and similar caster wheels for 2-inch jack tubes are shown on the linked page. We do not offer adapters or spacers to enable these to fit other tubing sizes. The other page displays all of our bolt-on jacks with wheels. We do have complete jacks with...
view full answer... - A-Frame Trailer Jack With Wheel AttachmentYou can get the Fulton F2 Adjustable A-Frame Trailer Jack # F1413250334 but take some measurements to see if it will fit in your A-Frame coupler. I've included a diagram for you! The plate that mounts to your A-Frame coupler is 5 inches in diameter and the coupler opening needs to be more than 2-3/4 inches in diameter. Yes, the wheel attachment # F500266 is an accessory. This jack can support 2,000 lbs without the wheel and 1,600 lbs with the wheel. Since the wheel is held in by a pin...
view full answer...
- Recommended Replacement Bolt-On Trailer Jack with 1500-lb Capacity and 11" Bracket HeightI have a solution for you, but the bracket height of the Dutton-Lainson Round Trailer Jack # DL22210 has a bracket height of 16-5/8", so it would not be short enough to be used on your trailer. I recommend usinig the Fulton F2 Swing-Up Trailer Jack # F1413020134 which has an adjustable bracket that when at its lowest setting is approximately 11" from the ground to the center of the bracket. This is a dual wheel, swiveling jack that can provide up to 10" of lift and has a 1600-lbs capacity....
view full answer...
- What Weight Capacity Jack Should I use on my 24 Foot Pontoon BoatThere is a wide range of weights when it comes to 24 foot pontoon boats. They can weigh anywhere from 2200 lbs. up to 4000ish pounds. Meaning maybe 800-1000 lbs of tongue weight. With that said the jack only needs to take care of a little more than the tongue weight really. I always go overboard on the weight needed because it will last longer simply because it isn't working at its capacity. The Dutton-Lainson Round Swivel Jack w/ 2" Wide Wheel part # DL22210 that you looked at is not...
view full answer... - What Kind Of Grease To Use In The Dutton-Lainson Round Swivel Jack DL22210The Dutton-Lainson Round Swivel Jack # DL22210 can be lubricated with really any general-purpose grease. We have the LubriMatic Multi-Purpose Lithium Grease # L11316 which is what we recommend for this application.
view full answer... - Bolt Through Trailer Jack ReplacementI recommend Dutton-Lainson Round Swivel Jack w/ 2" Wide Wheel - Sidewind - 12" Lift - 1,500 lbs Item # DL22210. This jack allows you to bolt through the frame however, it comes with brackets that will fit where your existing jack sits. The mounting holes on the plate are 5-1/2" x 3-1/2". I have provided a link to a review video so you can take a look at it.
view full answer... - Recommended Hand Crank Trailer Winch and Jack for 6K BoatThe general rule we use for selecting a boat trailer winch is 2:1 which means for a 6,000 lb boat we'd recommend a 3,000 lb winch. The Jif Marine 2-Speed Trailer Winch part # 315-W3200D is a great option for this rated at 3,200 lbs. It comes with a strap and clevis hook as well, pre-installed. It also has a two-speed operation, one for speed and one for power. You'd simply un-bolt the the old winch, drill a few holes for the new pattern, then bolt the new one in place. In regard to a new...
view full answer... - Replacement for RAM 1500 Swivel Jack for Shorelandr Trailer The highest lift is going to come from the Xtreme Off-Road Ratcheting Trailer Jack w/ Dual Wheels # ARK54FR. This has a retracted bracket height of 16-3/4" and a lift of 15-1/2" for an extended height of 32-1/4". The capacity is 1,100 lbs so not as high as the RAM but it looks like your boat only weighs 4,200 lbs so the tongue weight shouldn't come close to this. To give you another option that doesn't carry such a high cost check out the Dutton-Lainson Boat Trailer Jack w/ Wheel # DL22210....
view full answer... - Will Dutton-Lainson Trailer Jack DL22210 Fit 3 x 5 Trailer Frame and Good With Salt WaterThe Dutton-Lainson Round Swivel Jack # DL22210 you asked about will fit trailer frames that are 3" x 5" but for a salt water environment there are better options. For a jack that will fit a 3" x 5" trailer frame and is designed for salt water I recommend the Fulton Bolt-Thru Swivel Marine Jack # FXP15L. This Fulton has a 600 hour salt spray rating (which the Dutton-Lainson does not), along with the same 12" lift and 1,500 lb capacity of the DL. I have added a link to a video review for...
view full answer... - Side Wind Bolt-On Trailer Jack for Trailer with Limited Ground ClearanceI do have an option for you but I am not aware or any side mount trailer jacks similar to the Ultimate Trailer Jack part # 322-RDJ-2K in regards to how the mounting bracket can be adjusted. However, the majority of cases where the Ultimate Trailer Jack is used it is because of limited ground clearance. Therefore, I recommend using the Dutton-Lainson Round Swivel Jack w/ 2" Wide Wheel - Sidewind - 12" Lift - 1,500 lbs # DL22210. The reason I recommend the above is because there is very...
view full answer... - Does Wheel Caster of Dutton-Lainson Round Swivel Jack # DL22210 Rotate with Inner LegThe caster wheel of the Dutton-Lainson Round Swivel Jack # DL22210 that you referenced rotates freely from the rest of the jack. The inner leg is not what rotates with the wheel. I attached a review video link for this jack with more info on it for you to check out as well.
view full answer... - Swivel Jack with Wheel with Enough Lift to Lift Trailer Up 25 Inches from the GroundThe bracket height of a jack is measured from the center of the bracket to the bottom of the wheel or foot. For jack # FTJ12000101 when the jack is fully retracted as high as it will go it measures 23 inches from the bracket center to the bottom of the wheel. Depending on how tall the trailer frame is this may or may not be enough. Jack # DL22210 has an extended measurement of 26-5/8 inches so provided the trailer you have does not have a bottom-mount (underslung) coupler it will provide...
view full answer... - Trailer Jack and Stabilizer Recommendation for Trailer that Sits 25 inches Off GroundThe Dutton-Lainson Trailer Jack part # DL22210 that you referenced can extend 28-5/8 inches from the bracket down to the ground. The scissor jacks part # UF48-979031 have a lift of up to 30 inches so they would work great as well.
view full answer...
Do you have a question about this Trailer Jack?
Info for this part was:
Edited by:
Tyler C
Expert Research:
Michael H
Expert Research:
Jameson C
Video Edited:
Joshua S
Installed by:
Cole B
Installed by:
Randy B
Video by:
Chris R
Written by:
Matthew S
Updated by:
Alex H
Updated by:
Ryan F
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Nick S.
1/5/2026
That is great to hear! I am glad it was almost like an exact replacement to your original. What kind of trailer did you replace it on?