Will Dutton-Lainson Trailer Jack DL22210 Fit 3 x 5 Trailer Frame and Good With Salt Water  

For a replacement strap that will work great with your Dutton-Lainson Hand Winch #DL14627 I highly recommend the Dutton-Lainson #DL24249. This is a really durable 2 inch wide, 25 foot long strap with a breaking strength of 4,000 pounds. It includes…

Shelby jacks are no longer in production. If the welded mount had a bolt-thru design, then I recommend checking the pin hole dimensions for compatibility. The bolt hole centers are 3 inches apart on the Jack Mounting Bracket for Fulton Marine Jack…

If it is done correctly, welding is much stronger than bolts. This isn't to say that bolt-on applications are not effective and that they cannot handle the weight, because they can. Bolt-on jacks are a good choice in case you want/need to replace…

In order to remove a welded-on trailer tongue jack you will need to cut off the old welds to release the mounting bracket. This can be done using an angle grinder. The jack can then be replaced with another welded-on option such as the Fulton Marine…

Hello Gerry, thanks for reaching out. We do have one repair kit for the Profile 2000 winches, the Winch Ratchet Repair Kit by Dutton-Lainson #DL70475. You can see what parts it comes with in the picture below. If this does not contain what you need,…

Hey Rodney, so the winch you have now is an 1,800 lb winch with a 20 foot strap so for a Dutton Lainson replacement the part #DL17042 would be a really great option. This is a similar specced winch but it also has side covers to protect the gears…

The overall diameter of your tire size 205/75-15 is 27-1/4 inches so a cover set like the part #290-3953 would work great as it fits tire diameters that are between 27 and 29 inch. This cover gives you two tire covers that are made from a long…

We have exactly what you are looking for. The replacement light we offer that will work for you is part #ST16RB. This is listed as an exact replacement for the Wesbar 3554 light on your trailer, which is the passenger side of the trailer. if the…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…