Determining The Correct Replacement Hubs For A Dexter Eliminator Torsion Axle

Updated 05/28/2024 | Published 05/22/2024

Products Featured in This Question

Dutton-Lainson Boat Trailer Jack w/ Wheel - Sidewind - 12" Lift - Black - 1.5K

(58)

$155.89

4" Carbon Fiber Digital Caliper

(26)

$12.14

Question:

looking for replacement hubs for an Eliminator Torsion Axle. axel is on a Sealion Metal Fabricators, Inc galv bunk trailer model TR-21-3100..2016. The only info i have on axel is Eliminator Torsion Axles with Quick Change Spindles Thanks! Ray Tiedown Engineering..

asked by: Ray S

Expert Reply:

Hi Ray,

Without the serial number to look up the axle the only way to determine the correct replacement hubs would be to see if the face of the hubs has the part number stamped into them or to take some measurements. If you have to measure then we you'll need to use a digital caliper # PTW80157 to measure points B, C, and D from the diagram below. Then we just need to know the wheel bolt pattern to make sure the new hubs match up to the wheels.

expert reply by: Kevin C

Spindle measurement guide
(click to enlarge)

Measuring for wheel bolt pattern
(click to enlarge)

Ray S.

5/24/2024

kevin, 2482378 serial number TDE part # 41026-2 Axel desc, T60-90.5-76.16-OLI-CV3NGFE-22D 6 BOLT.. Hope this helps Thanks, Ray

Kevin C.

5/28/2024

@RayS Can you send me a picture of the axle tag? I'll send you a separate email for the picture because we can't upload them to this comment section yet.