Product Experts Available Now!
Call 1-800-940-8924
Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - Smoke
(2504 reviews)
Price: $79.58
In Stock
Ventline
Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - Smoke
Part Number: V2092SP-29
In Stock
$79.58
Retail:$90.39
You Save: 12%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (2504)
- Q & A (0)
- Photos
Ventline RV Vents and Fans - V2092SP-29
Highlights
- Keep air moving inside: Lets fresh air in and heat escape while staying secure.
- Easy manual control: Hand crank opens and closes the dome—no wiring needed.
- Let in soft light: Translucent smoke cover brightens the interior without glare.
- Built to last: Polypropylene dome and galvanized steel flange resist rust and damage.
- Simple fit-up: Designed for 14-1/4" x 14-1/4" roof openings with included garnish for 1-7/8"–3" roofs.
- Quick to clean: Snap-out screen removes easily for washing.
Features to know about
Keeps Air Moving and Heat Down: Manual Roof Vent with Smoke Dome
This Ventline Ventadome roof vent lets fresh air in and hot air out without needing power. The hand-crank design makes it easy to open and close the wedge-shaped, smoke-colored dome from inside. It’s a simple way to keep air circulating in enclosed spaces so things don’t feel stuffy or overheated. The translucent lid also lets in some natural light, brightening up the interior without being harsh.
Built to Last Through the Weather: Polypropylene Dome and Galvanized Steel Flange
The aerodynamic dome is made of durable polypropylene that stands up to sun and rain. It mounts to a galvanized steel roof flange that won’t rust or corrode, so you can count on it to hold up season after season. When closed, the vent sits low at 4-1/2" above the roof, and it extends to 10-3/4" when fully open.
Easy DIY Setup in Standard 14-1/4" x 14-1/4" Openings
This vent fits the common 14-1/4" x 14-1/4" rough opening found on most setups, so replacing an old vent is straightforward. The included Polar White interior garnish fits roofs 1-7/8" to 3" thick and has a 2-1/8" leg length. Just mount with #8 screws and seal it up using an installation kit such as #344270KITW (sold separately).
Simple to Clean and Maintain: Snap-Out Screen and Accessible Design
The built-in screen keeps out debris and pests while letting air flow freely. When it’s time to clean, the screen snaps out easily so you can rinse it off and pop it back in. The manual crank system needs no wiring or batteries—just reliable operation every time you use it.
Technical Specs Highlight
– Rough opening size: 14-1/4" wide x 14-1/4" long
– Metal flange measurement: 16-1/2" x 16-1/2"
– Garnish size: 16" x 16"
– Vent height: 4-1/2" closed, 10-3/4" open
– Garnish fits roof thickness: 1-7/8" to 3"
– 2-Year limited warranty
Specs
Roof and Opening Dimensions
- Included garnish fits roofs: 1-7/8" to 3" thick
- Rough opening size: 14-1/4" wide x 14-1/4" long
- Measurement of metal lip of vent: 16-1/2" x 16-1/2"
- Garnish measurements: 16" x 16"
Garnish Specifications
- Garnish leg length (depth): 2-1/8"
- Garnish color: Polar White
- Other garnish sizes: Available (sold separately)
Cover and Vent Dimensions
- Cover color: Smoke
- Vent extends above roof: 4-1/2" Closed / 10-3/4" Open
Warranty
- Warranty: 2-Year limited warranty
Note
Screws and sealer are not included. See Installation Kit (344270KITW), which includes all necessary screws and sealer to install vent.
V2092SP-29 Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - Smoke
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Arrived Damaged
- Wrong item was ordered
- Did not arrive in time
Ratings & Reviews
4.7
2504 reviews
by:
H Mackay
09/05/2014
2014
Pontiac
Trans Sport Van
Installed this vent into my Haulmark Transport 6'x12' enclosed trailer. Installation was easy, I cut a 14.25" x 14.25" inch hole between two crossmembers in the roof and dropped it in place. Because the roof on this enclosed trailer is so thin, I used a piece of 3/8" plywood so sandwich between the interior garnish and actual vent. I cut the same size hole into the plywood and left a 2" lip all around. I use 28 #8 x 5/8" stainless screws to hold it in place, pre-drilled with 1/8" bit. I then used roofing tar to seal the vent and put masking tape all around, leave 1" from the flange to ensure good coverage. I then removed the masking tape, leaving nice clean lines. Interior garnish is held in place by #8 x 3/8" galvanized screws.
Huge kudos to etrailer for carrying such awesome products for great low prices and offering super cheap shipping to Canada!
Huge kudos to etrailer for carrying such awesome products for great low prices and offering super cheap shipping to Canada!
by:
Lila
10/18/2026
Excellent communication from the seller. Packaged perfectly and still arrived in a timely manner. Thank you very much
by:
Jerry Kramer
08/16/2017
My truck build; I have developed, invented, a new kind of truck cap and also wanted to provide the best venting in the industry and this is why I wanted this product. Although it is a little flimsy it is easy to install and easy to use. And it adapts well for my use. My product (I hope to have available in good stores like Etrailer by years end) is a rigid, folding, adjustable (fits most trucks), one person on & off, and easy to store when off pick up truck cap or camper. See attached photos of my prototype build. Many have inquired to use it for their pets, for camping, and many other uses.
by:
BrianB.
09/09/2019
Learned my lesson, not to go cheap! I bought a $20 dollar vent online less a year ago, and the Arizona heat disintegrated it. I called Noah at eTrailer and he was fast, knowledgeable, and courteous. The new vent arrived within a few days and it installed in less than and hour without a problem. Most of the work is in the prep. If you've never done this before, follow the instructions in eTrailer's video, and you won't have any problems. If you need to trim the garnish ring, I snipped it vertically at either side of the corners and then bent the plastic, snapping it like tile or drywall. Easy-Peasy! I really like the smoke tint to, I can see the sky through it. Thanks for the suggestion Noah!
by:
Scott
02/23/2026
Perfect replacement of a standard roof vent. You know, the one I walked through when I was sweeping 18” of snow off the camper…
by:
Doug
12/27/2021
Very pleased with product and the fast cheap delivery.Also liked that the size stayed the same all these years it fit the opening of my old vent in my 1978 classic van
by:
Jesse
03/23/2026
It works great for my trailer
by:
Gary
04/05/2013
Was a replacement for another ventline taken out by hail. Item was as presented, price was right shipping was prompt. Will use terai let again if need arises
by:
Ray L.
07/14/2014
Great Product ! Easy Installation & Looks Great !
Thanks Guys
Thanks Guys
by:
Vickie
03/23/2026
We love these, they work perfect
by:
Paul
07/28/2016
This product is a wonderful addition to our travel trailer.
Since we installed the one vent and another vent with the fan we have
not had any problems with them. Great products !!!
I would like to mention that the colored covers let in more light then
the old white cover.
Since we installed the one vent and another vent with the fan we have
not had any problems with them. Great products !!!
I would like to mention that the colored covers let in more light then
the old white cover.
Paul
7/28/2017
Great. Still looks and works like it should.
by:
C
04/23/2025
Product description, fitment, construction materials, size, all matched the website. Very good product for replacing your vent on a trailer. Excellent support and shipping from company.
by:
Brandon
09/18/2025
I received the wrong one and will need to return for correct
I may have ordered it wrong ours has a fan in it
I may have ordered it wrong ours has a fan in it
by:
Coleen S.
07/09/2016
This vent was shipped fast and received within a week after. I was contacted by a customer rep to make sure I was satisfied or had any questions. Vent went in quickly and easily. Instructions were clear and I had no trouble understanding what was required. This was the first time I had done anything like this on my travel trailer and am extremely happy with the results. I would order from etrailer.com again in a heartbeat. Great product-Great customer service. Thank you, George J.
Coleen S.
7/9/2017
After 1 year I am still extremely satisfied with the vent. It is functioning as it should and I have had no problems with it at all.
by:
Larry j
04/07/2015
Pretty solid to be so light weight, UPS beat the hell out of it in route. If it only came with a gasket like the original I removed :-( Fit and function Good, the original lasted 19 years and the plastic dome was still in tact with no leaks, the mechanism broke. 2 Tubes of Hi quality Permatex engine sealer and I hope for the best. I would be happy for 15 years of longevity. The old sealer was petrified from the UV and heat, came off like concrete. That gasket kept it sealed....
Patrick B.
4/15/2015
RTV Silicone makes for an excellent gasket material if you are mounting flat surfaces. Follow the perimeter all the way around, encircle the hardware holes, and attach the vent. Once it cures, it creates a gasket between the two surfaces. For extra waterproofing, you can come back with silicone caulk and cover the heads of the screws and run a perimter bead around the vent.
by:
Jake H
05/01/2016
I replaced the old vent on a 1983 tent trailer. This vent is twice the size of the original one so there was some cutting and modification of my roof involved but the vent works great. I also got the loctite vent install kit that comes with the sealant and screws to install the new vent. It was a great help for a he install. My roof hasn't leaked since last year.
by:
Tim S
10/16/2016
Fast shipping great product, hardest part was scraping the old sealant off the roof from my original vent that broke, other than that simply screw it down and fitment was perfect
Tim S.
10/17/2017
Everything is holding up well and working great as expected.
by:
David
09/18/2022
I used this vent to replace an older static vent in our high top camper van. The installation and instructions were OK, and the vent opening mechanism works fine. The issue is that the top cover is too flexible, and it always flapped in the wind. I purchased a replacement cover from [online company], which is thicker, stronger with more reinforcing ribs. It works fine. Overall a good product with a flimsy top cover.
by:
Melvin
07/24/2022
Looks terrific, as described. Only wish the done were a little less flimsy. The product fit & looks perfect however the plastic dome could have been a little thicker plastic
by:
MAUREEN
06/05/2017
Products, VENTLINE roof vent for my FORD Econoline and WEATHER TECH window Deflectors, arrived in good condition. I needed to get some air to the back of the van, as it will be used for camping, think this will do the trick. Then I have been interested in trying out deflectors for a long time as well, wanted to be able to get better air circulation without the road noise. All contact was very positive and I would order from you again as well as tell others.
Installation will occure on June12, so will let you know how that goes. It was all a very good experience.
MAUREEN
Installation will occure on June12, so will let you know how that goes. It was all a very good experience.
MAUREEN
by:
Spencer
08/29/2017
The vent is just like it is pictured. It is easy to install, it was just the right depth for the ceiling of my trailer. I put it in my teardrop trailer. The tinted plastic is nice to keep the sun out. It is easy to raise and lower. I would recommend this to anyone who wants an economical roof vent for their trailer.
by:
Clem
12/26/2017
Bought 10 inch brake assemblies for my enclosed trailer. From Florida to Canada, had no problems, they worked flawlessly. Always received great products from etrailer over the years. There my goto for trailer parts whenever I'm in the US.
by:
shawn i
07/06/2014
great products,great prices and super fast shipping A+++++++++ company!
Shawn I.
7/18/2015
works great
by:
Gary F
12/18/2016
Great quality, great fit, item was as described, fast shipping. solved my problem on my enclosed trailer. Will order from etrailer.com again for sure.
by:
Scott Hooten
06/22/2017
Easy to install - took less than 30 mins. very happy with the product.
I am also extremely happy with the customer service. I accidently ordered 3 of these vents and I only needed 1 - when I realized the mistake I immediately called customer service and the girl who answered canceled the current order of 3 and made a new order (without laughing and without my wife finding out about the over charge)!!
The product was shipped the same day and I installed it the day I received it. Took less than 30 mins.
Happy customer
I am also extremely happy with the customer service. I accidently ordered 3 of these vents and I only needed 1 - when I realized the mistake I immediately called customer service and the girl who answered canceled the current order of 3 and made a new order (without laughing and without my wife finding out about the over charge)!!
The product was shipped the same day and I installed it the day I received it. Took less than 30 mins.
Happy customer
25
2504
true
Show More Reviews
See what our Experts say about this Ventline RV Vents and Fans
- Will Ventline Ventadome Trailer Roof Vent Fit 2004 Gulfstream Conquest MotorhomeHey Faith, yes the Ventline Ventadome Trailer Roof Vent # V2092SP-29 that you referenced does fit your 2004 Gulfstream Conquest limited touring series motorhome as this fits all standard RV roof vent openings. They all happen to be the same size which is 14 inch by 14 inch so this for sure will work! Do you know what roof vent you have currently?
view full answer... - Replacement Roof Vent Cover for Lid Marked AS-13M-VDO449 ANS Z26 1We have had a similar question to this come up and we were able to determine that the number AS-13 M-VDO449 that you listed is stamped on the vent cover part # BVD0449-A01. If you are looking for the entire fan setup and not just the cover you would want the part # V2092SP-28 for a white lid or part # V2092SP-29 for a smoked lid. The smoked lid would allow more light in.
view full answer...
- Do You Have a Replacement Fuel Door for a Snowmobile Trailer?Hey Dana! Sorry but we do not have a replacement gas door in that size. The largest is going to be the 6-7/8" x 6-3/8" B&B RV Multi-Purpose Fuel Hatch item # BM42MR. The closest door we have to your dimensions is the Multi-Purpose Access Door - 14-1/2" Wide x 14-3/4" Tall - Black item # SE68VR or in white item # SE86VR.
view full answer... - Replacement Parts for Ventline V2094 Powered Vent I am sorry to hear about that. We do offer a couple of replacement parts for the V2094 powered vent. The Replacement Operator, Knob and Screw item # BVD0462-00 and the Replacement Fan Blade for Ventline Ventadome Trailer Roof Vents item # BVD0215-00. If neither of these parts are what you are looking for we offer entire replacement assemblies for the V2094. The vent assembly item # V2094SP-34 in smoke and item # V2094SP-30 in white.
view full answer... - Recommended Roof Vent Upgrade To Replace Broken 12x12 Vent LidI have a replacement option but you are correct that we do not carry any 12x12 vent lids. The 12x12 vent lid is an odd size that is difficult to find replacement lids for so I recommend changing your vent to the more common 14x14 vent like the Ventline Ventadome Trailer Roof Vent # V2092SP-28 that has easy to find replacement parts to make life easier in the future. The Ventline Ventadome # V2092SP-28 has a white lid, but if you prefer a smoke lid you can use # V2092SP-29 Installing...
view full answer... - Recommended Roof Vents For A 2019 CargoMate Blazer Enclosed Trailer We have a couple of options for your 2019 CargoMate Blazer enclosed trailer depending on the features that you want. If you're just wanting a standard vent with no fan you can install the Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - Smoke # V2092SP-29. This roof vent allows air to circulate in your enclosed trailer, keeping the interior ventilated without compromising security. The wedge-shaped, smoke-colored plastic vent cover opens and closes from inside with...
view full answer...
- Replacement Vent Cover for 2018 Grand Design 2600RBYou can replace the plastic roof vent covers on your 2018 Grand Design 2600RB and not have to worry about replacing the entire assembly with something like the Ventline # V2092SP-29. To choose the correct replacement, you'll need to determine which type of hinge you have to attach the vent cover as well as the size of the vent; the industry standard vent is 14" x 14", so you'll want to measure to make sure that your roof vent is around that size (some will be 14-1/2" x 14-1/2", but the...
view full answer...
- Replacement Vent Cover for Cargo Area on Featherlite Trailer Model # 9406In order to determine if we have a replacement cover that will fit your trailer vent you will need to look at the hinge style of the old cover and also it's measurements. I have attached a picture to illustrate the different types of hinges. I have also included a link to all of our replacement vent covers. You can use the filters on the page to narrow the search. For example, if your current cover has a continuous hinge (kind of C-shape) and measures 14 inches x 14 inches, you could...
view full answer...
- Replacement Roof Vent for 1976 Silver Streak 2600 TrailerThanks for the photo. It appears you have just a standard manual lift vent, so my recommendation is to use the Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - White # V2092SP-28 or smoke colored cover # V2092SP-29. These vents use the standard trailer rough opening you have and will be an easy replacement as well as basic upgrade. Either option will fit in the same rough opening as your current vent and I recommend using the Installation Kit # 344270KITW for your...
view full answer...
- Which Trailer Vent Covers Let More Light Pass Through, White or SmokeThe smoke and white covers that are on the Ventline roof vents are both going to let quite a bit of light into the trailer. However, due to the translucent nature of the smoke covers they would let more light in. Both would last about the same amount of time. One has not been shown to stand up to the sun better than the other. For a smoke version of the part # V2094SP-30 that you referenced you would want the part # V2092SP-29.
view full answer... - Solutions To Keep A 6x12 Enclosed Trailer CoolI recommend installing a standard manual lifting roof vent, like the Ventline Ventadome Trailer Roof Vent # V2092SP-29 for a smoke color, or # V2092SP-28 for a white color. I suggest also adding the MaxxAir Standard RV and Trailer Roof Vent Cover # MA00-933066. which will allow you to keep your vent open while keeping out rain and water. To take it a step further, you can also install the 2-Piece Polypropylene Trailer Vent for 3" Diameter Hole # WHMAV2-WAVT2 lower on the trailer to create...
view full answer... - Which Roof Vent for Featherlite TrailerThe # V2092SP-29 vent you referenced is designed to fit in a 14-1/4 by 14-1/4 inch rough opening, which is typical of the square vent assemblies we offer. If your rough opening measures 14 by 14, you will find that the vent fit would be extremely tight and the opening would need to be enlarged slightly.
view full answer... - Replacement Ventline Trailer Roof Vent Covers for Parts V2092 and V2094We carry a broad range of Ventline products, complete vent assemblies as well as individual replacement parts, for both of the part numbers you referenced. For Ventline item V2092 we offer complete vent assemblies, # V2092SP-29 in smoke color and # V2092SP-28 in white. Replacement domes are also available, # BVD0449-A03 in smoke and # BVD0449-A01 in white. For powered vent V2094 we offer a complete vent assembly # V2094SP-34 in smoke and # V2094SP-30 in white. Replacement domes only...
view full answer... - How to Install a Trailer Roof Vent on a 5 x 8 Pace Enclosed Cargo Trailer with Sheet Aluminum RoofThe Ventadome Trailer Roof Vent, V2092SP-29, is adjustable for roof thicknesses from 1-7/8 inches to 3 inches. If your roof is thinner than this you would need to add a trim ring like a piece of 1/2 inch or 3/4 inch plywood, with a 14 x14 inch hole cut in it, to the inside of the trailer roof. This will also give you a better mounting situation for the vent. You might want to use an Installation Kit, item # 344270KITW, to complete the installation of this vent. I linked a video that you...
view full answer... - Replacement Roof Vent for 1992 Palomino Filly Pop-Up CamperWe have many types of trailer roof vents and vent parts but we do not have a way to look up the vent originally installed in your 1992 Palomino Filly so I suggest confirming the dimensions. Most often square roof vents are 14 x 14-inches and fit roof openings that are generally 14-1/4 x 14-1/4. Based on photos of your pop-up that I could find it appears you do have a 14 x 14 vent so I linked for you our entire range of trailer vents in this size. We have manual vents, 12V powered vents...
view full answer... - Exit Vent Replacement Ventline Model V2047From my research it looks like you have a 24" x 24" Ventline exit vent. We do not carry exit vents only roof vents which are much smaller compared to your existing opening from my research. If you needed a roof vent, you could use the standard Ventline Ventadome Trailer Roof Vent # V2092SP-29 but you would most likely need to cut a new opening size of 14-1/4" wide x 14-1/4" long to install it.
view full answer... - Should Butyl Tape or Putty Be Used to Install New Trailer Roof Vent When installing a new roof vent like the Ventline Ventadome Trailer Roof Vent # V2092SP-29 I recommend using butyl tape like what is included in the Installation Kit # 344270KITW. Butyl won't dry out over time like traditional putty and it will help to create a better seal between the vent and roof. I have attached an installation video that you can also take a look at.
view full answer... - Replacement Trailer 14 x 14 Roof Vents and Installation KitsCamco part # CAM40148 is a smoke-color replacement vent LID ONLY that fits specific production years of Ventline and Elixir vents models. It fits Ventline vents with a continuous metal hinge that were produced before 2008 and similar Elixir brand vents produced after 1994. This hinge type is shown in the linked photo. We do also offer complete vent units that include the lid. These 14 x 14-inch complete vents are shown on the linked page. We have models without fans like # V2092SP-29 or...
view full answer...
- Comparing Ventline Ventadome Trailer Roof Vents with Metal and Plastic LidsThe Ventline Ventadome Trailer Roof Vent part # V2110SP-24 has a metal lid. It has the same internal components as all of the Ventline Ventadome Trailer Roof Vents such as part # V2092SP-29 which has a plastic lid. The only difference is the lid.
view full answer... - Replacement Lid For Ventline Metal Ventadome Trailer VentYes your hinge is a metal continuous hinge. Most trailer roof vents are 14-1/4" wide x 14-1/4" long. Looking at your photos it looks like you had a Ventline metal Ventadome Trailer Roof Vent like part # V2092SP-29. I recommend to use the Ventline Ventadome Trailer Roof Vent Cover part # BVD0449-A01 to replace your cover.
view full answer... - Replacement Ceiling Vent for 1998 Charmac Snowmobile TrailerThe Ventline Ventadome Trailer Roof Vent # V2092SP-29 that you referenced does not include a fan. The vent itself measures 14-1/4 inches by 14-1/4 inches which is standard for trailer roof vents. The garnish around the vent is the 16 inches by 16 inches and the metal lip is 16-1/2 inches by 16-1/2 inches. If these measurents match the style of vent you have then this will work for you.
view full answer... - Will Ventline Ventadome Trailer Roof Vent Fit A 1992 Fleetwood Bounder?The Ventline Ventadome Trailer Roof Vent - Manual - 14-1/4" x 14-1/4" - Smoke # V2092SP-29 is an industry standard size and a very popular brand. It will work on your 1992 Fleetwood Bounder. I recommend the Installation Kit # 344270KITW for this installation.
view full answer... - Recommended 14 x 14-Inch Ventline Roof Vent for 1998 Sun Lite Pop Up Camper TrailerA 14-1/4-inch x 14-1/4-inch rough trailer roof opening is very common and we offer a whole range of complete vent assemblies and also replacement lids and other parts for this size vent. Vents that fit this opening size are 14 x 14 size and the linked page will let you see all that we offer. These include both manual and powered types, plastic-domed vents in various colors and also metal vents. For instance, if you prefer a smoke-color manual vent you could use Ventline # V2092SP-29. If...
view full answer... - Replacement Roof Vent Recommendation for Fuzion Toy Hauler with AS-13 M-VDO449 on LidWe have had a similar question to this come up and we were able to determine that the number AS-13 M-VDO449 that you listed is stamped on the vent cover part # BVD0449-A01. If you are looking for the entire fan setup and not just the cover you would want the part # V2092SP-28 for a white lid or part # V2092SP-29 for a smoked lid. The smoked lid would allow more light in.
view full answer...
Do you have a question about this RV Vents and Fan?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Lori W
Expert Research:
Jeffrey L
Written by:
Raymond P
Updated by:
Adele M
Updated by:
Kathleen M
Updated by:
Wilson B
Updated by:
Hannah L
Updated by:
Adam Y
Updated by:
Isabelle B
Video Edited:
Chris R
Installed by:
Robert C
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Doug
12/28/2022
Love it ,lots of compliment’s on look being it’s a classic van. Gave lots of fellow vanners the link