Short on space but still want to track your water levels? This surface mount gauge gives you real-time readings in a compact design, and it also includes adapters to help you connect your plumbing and complete your setup with ease.
When a basic tank panel drops from full to low with little warning, planning showers, dishes, or time away from hookups gets frustrating fast. This surface-mounted Topargee gauge tracks freshwater as it leaves your tank through an inline "sender", then displays exact remaining water in liters or gallons. With real-time readings and memory storage for your preset water capacity, your display keeps showing the amount available as water gets used.
Small cabinets and crowded utility areas do not leave much room for a bulky monitor. This gauge sits in a surface-mount cradle that installs with double-sided tape or screws, and its 2-13/16" wide x 2-3/16" tall size fits into compact spots. Once placed where it is easy to reach or tucked away in a cupboard, your freshwater reading is still available when it is time to check levels.
Adding another powered display gets messy when there is limited access behind panels or no convenient 12V lead nearby. This surface-mount gauge runs on AA batteries, so the display does not need external power for setup. After installation, your gauge powers its own screen and keeps the preset tank capacity stored for the next time water level tracking starts.
Plumbing fitment is often the part that slows the job down, especially when thread types and water line connections do not match the gauge sender setup. This kit includes adapter fittings for connecting a 1/2" BSP female thread to a 1/2" NPT male connection, plus a PEX adapter with a 1/2" female pipe thread end and 1/2" barb for 1/2" PEX, polybutylene, or polyvinyl tubing. The swivel nut attaches without twisting your water line, and the barb with compression nut secures the connection without crimping or special tools, letting your plumbing route connect cleanly into the gauge setup.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everyone. Steve here with etrailer. Today we're taking a look at the Topargee Surface-Mounted Water Tank Gauge with Adapter Fittings. So folks, we've all been there. You're reading your panel and your tank says full all morning, but now I'm doing some dishes at lunchtime or something and all of a sudden halfway through, I'm out of water or it's saying I'm low. What happened Well, most factory gauges just aren't accurate.
They read in big jumps, full, 3/4, 1/2, those kind of things. And so we end up guessing instead of actually knowing truly how much we have left. So that's exactly what this Topargee Surface-Mounted Water Tank Gauge will fix. So instead of estimating levels inside the tank, this system measures actual water flow down to the gallon in real time. So whether it's a quick shower, brushing your teeth or rinsing off gear, you're gonna know exactly what you have left.
So to set it up, you'll put in how much your water tank holds, or how much you have in there rather. And then based on the flow that it's reading through this little guy as it's being used, it's gonna feed back that information to the unit. And this is a simple flexible install. It's very easy to do. You have all the fittings here, double-sided 3M adhesive for the back here, or you can choose, sold separately, there's some screws you can get.
Or you can use your own screws and just put that on the wall. And it does use a simple install wire here to do its thing and give you the readout. So it's very easy to use. The installation's clean. It's gonna go in line with your water line.
You don't have to worry about drilling into the water tank. So that's a lot less time wasted, and it's a lot less chances for leaks. And as always, if you don't wanna tackle the install yourself, no worries. You can reach out to us, use our install locator link, and on the website, and then based on your zip code, we can get you hooked up and paired with a trusted etrailer installer in your area. Well folks, that's gonna wrap up our quick look together. I'm Steven. Thanks for watching and have a good day.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.