Product Experts Available Now!
Call 1-800-940-8924
THIS ITEM IS NOT A FIT FOR
2021 Hyundai Sonata
We'll connect you with nearby partnered installers who know this exact setup.
BAK Revolver X2 Hard Tonneau Cover - Roll Up - Aluminum and Vinyl
In Stock
$1,399.99
2021 Hyundai Sonata
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
We'll connect you with nearby partnered installers who know this exact setup.
- All Info
- Reviews (46)
- Q & A (0)
- Photos
BAK Industries Tonneau Cover
Highlights
- Custom Fit for Your Vehicle: Secures to your truck bed with model-specific clamps and hardware
- Hard Cover Keeps Gear Safe: Locks with the tailgate so cargo stays protected from theft or weather.
- Full Bed Access Fast: Rolls up and secures behind the cab without needing to remove the cover.
- Strong Hybrid Build: 1/4" aluminum slats with vinyl top hold up to 400 lbs evenly distributed.
- Flush, Clean Look: Low-profile design sits nearly even with the bed rails for a sleek finish.
- Simple No-Drill Install: Clamps on with a wrench—no holes or special tools needed.
Features to know about
Secure Everyday Storage: Hard Aluminum Core with Vinyl Finish
The Revolver X2 blends the strength of a hard cover with the clean look of a soft one. Its 1/4" thick, aircraft-grade aluminum slats are linked together for flexibility but stay tough enough to hold up to 400 lbs of evenly distributed weight. A textured black vinyl layer gives it a smooth finish while shielding the metal from UV rays, impacts, and weather. When locked, the cover creates a solid barrier that can’t be cut through like a typical soft vinyl top—keeping gear inside safe when the tailgate is closed.
Full Bed Use in Seconds: Roll-Up Aluminum Slat Design
When you need to carry tall or bulky cargo, you don’t have to take the cover off. Just pull the release cord and roll it forward. The aluminum slats roll up evenly behind the cab, held by sturdy nylon straps and plastic buckles that keep it secure on the road. Four rubber bumpers cushion the bundle so it doesn’t scuff the cab. Because it mounts inside the bed rails, you can still use stake pockets or add accessories like tie-down anchors or racks.
Clean Look and Tight Seal: Flush-Fit Rails
Many covers sit high above the bed, but this one installs nearly flush with the rails for a sleek, integrated look. Matte black rubber seals run along the sides, cab rail, and tailgate to help keep water out and block dust from creeping in. The design not only keeps cargo protected but also cuts down wind drag for better aerodynamics.
Simple One-Person Operation: Automatic Latching System
Opening or closing the X2 is straightforward. To close, just roll it out and press down on the rear slat—the latches automatically lock along both sides. The cover secures tight when the tailgate shuts, so there’s no Velcro or snaps to fuss with. To open, drop the tailgate and pull either of the corner release cords, which disengage both latches at once. The side rails rotate to release the cover smoothly every time.
Quick, No-Drill Install: Clamp-On Aluminum Rails
Mounting the Revolver X2 doesn’t require any drilling. The aircraft-grade aluminum rails clamp to the inside of the bed sides, with bolts securing the front hinge rail at the cab. Slotted brackets, pre-installed spacers, and shims keep everything aligned without trial and error. Once tightened down, the cover rolls smoothly and seals evenly from front to back.
Specs
Construction
- Material: Aluminum and Vinyl
- Aluminum Thickness: 1/4"
- Vinyl Type: UV-resistant, textured black vinyl skin
- Rails: Aircraft-grade, rustproof aluminum with black powder coat finish
- Reinforcements: Gusset-reinforced levers
- Seals: Matte black rubber seals
- Underside Protection: Felt strips protect vinyl and hands from temperature extremes
Weight and Capacity
- Weight Capacity: 400 lbs evenly distributed
Design and Operation
- Cover Type: Roll-up, hard tonneau cover
- Profile: Flush, low-profile design that sits inside bed rails
- Access: Full truck bed access when rolled up
- Operation: Simple, one-person operation using built-in pull cable release
- Locking System: Latching system at tailgate with locking side rails
- Security: Cover and bed are secure when tailgate is closed and locked
- Appearance: Matte black finish with soft tonneau look
Installation
- Installation Type: No-drill, clamp-on design
- Included Hardware: Mounting plates, bolts, pre-installed shims and spacers
- Adjustment: Slotted brackets for alignment and snug fit
- Tools Required: Wrench
Compatibility
- Compatible Accessories: Stake-pocket-mounted accessories and raised side rails
- Vehicle Fit: 2014–2018 Chevrolet Silverado 1500 5-1/2' bed, 2014–2018 GMC Sierra 1500 5-1/2' bed
- Rack Compatibility: Compatible with Thule TracRac SR Sliding Truck Bed Ladder Rack #TH43002XT-782
Warranty
- Warranty Period: 3-Year warranty
- Country of Manufacture: Made in the USA
39120 BAK Industries BAK Revolver X2 Hard Roll Up Truck Bed Cover
Replaces 36120
Item # BAK39120
Installation Details
This Product Fits The Following Vehicles
- 2014 - 2018 GMC Sierra 1500 5-1/2 Foot Bed
- 2014 - 2018 Chevrolet Silverado 1500 5-1/2 Foot Bed
Ratings & Reviews
4.4
46 reviews
by:
Amazed
01/31/2020
W LOVE OUR COVER FOR OUR GMC BEDCOVER. IT DOES NOT LEAK AND KEEPS THINGS CLEAN.
WOULD RECOMMEND TO ANYONE NEEDING A BED COVER
KEITH MLONE
WOULD RECOMMEND TO ANYONE NEEDING A BED COVER
KEITH MLONE
by:
Robert
01/17/2018
I have to say...it was just like it said. Easy to install as it took me about an hour and 20 minutes with no drilling and it works easy and looks great!
by:
Chevy High Country
06/17/2017
2015
Chevrolet
Silverado 1500
Easy Install. Looks Great. I love that I can keep everything locked without any extra keys.
by:
Bob B
11/21/2016
2003
Chevrolet
Silverado
The rollback cover is excellent. It is designed well, and went on my 2003 Silverado easily and it fits well. The only negative I have with my new cover is when it arrived from the manufacturer (BAK), it was full of aluminum chips. As I unrolled it to install it they were wrapped into the cover. I was getting aluminum chips everywhere. The cover had them rolled in the fabric cover, I got them on/in my hands, and on the painted surface of my truck. That was my only concern. eTrailer.com is to be commented on their commitment to customer service. They kept me informed on the progress of the tonneau build continually. Thanks to all at eTrailer.
by:
James
01/16/2018
I like the idea of this cover rolling open or closed and the fact it locks when closed. Problem is the plastic guides that push into the aluminum rails do not stay in place. When rolled open and strapped down bouncing down highway the weight of the cover pushes these plastic guides out and allows seal to be damaged and to come out of its grove. I had to insert pieces of wood into the track to hold guides in place at front of track. I pull a 44 ft toy hauler around USA so cover stays rolled open for weeks at a time. The weight of rolled up cover smashes the guide pieces out of place. In the picture that’s paint stir sticks with foil tape on them so they stay dry.
by:
FREDERICK_C
08/02/2019
Overall I'm satisfied with the product, but for the price I expected a little better attention to detail. The fit and finish leaves something to be desired. All the parts are just cut and are not finished or cut evenly for that matter (see pics). It gives the overall feeling of a hastily finished product. Plus I've already to replaced some parts due to breakage. Fortunately they were rreplaced free of charge. But it does the job and fits my needs, so I'm giving it 3 stars.
by:
Keith C.
02/29/2016
2013
Nissan
Frontier
I ordered a BAK Revolver X2 Hard Tonneau cover for my 2013 Nissan Frontier pickup truck. Navigating the website was easy, I liked the price and the free shipping that were offered. I immediately received tracking information for my item so I knew what to expect. The item arrived on time and was professionally packaged and undamaged during shipment. The installation instructions were easy to follow and the kit included everything necessary to complete the installation, which took approximately 30 minutes. The cover looks great and works great. I am a very satisfied customer.
Keith C.
3/12/2017
Hi Laura - I am still pleased with my BAK bed cover. I dont like it quite as well as the previous version I had on my other 2013 Nissan Frontier truck which got stolen, hence the new cover, but I am still pleased with the product. The new cover doesnt roll or latch quite as smoothly as the old one, but it still works well. They also slightly changed the clips for anchoring the rolled up cover, and I find them harder to clip in and maintain tension on the strap, but again they do work. Thanks for following up.
by:
Sean M.
04/10/2019
Great tonneau cover! It's amazing how easily a well made product installs. I replaced my soft folding IMPORTED tonneau cover with this sweet piece and I can honestly say I now understand the difference in price. The Revolver X2 fits flush, looks great, closes securely, and just makes me feel a little cooler knowing it's back there ( I need all the help I can get). Bottom line, I was apprehensive spending so much for a tonneau cover but now that I did I will shout from the rooftops "YOU GOTTA GET ONE OF THESE REVOLVER X2s!" etrailer is a no-brainer as well, you can buy BAK tonneau covers from dozens of other retailers but I know etrailer, I trust etrailer, and I know if there's ever a problem (which I doubt there will be) etrailer will be there to fix it.
Sean M.
4/12/2020
Its still holding up well and it looks as good as it did the day I installed it. I have no regrets about making this purchase.
by:
Kyle R
05/21/2019
Toyota
Tundra
I couldn't be more pleased by this tonneau cover except if they found a way to make it magically disappear into the cab when I want to use the whole bed. It did its job throughout both summer and winter, keeping snow and rain out of the bed of my Tundra. By virtue of its unique rolling design, it's also one of the few options compatible with my TracRac: I can fully roll and unroll it no matter where the racks are placed.
Kyle R.
5/22/2020
My judgment has not changed. This cover is still excellent. If I ever get a different truck, this will be among my first accessory purchases.
by:
Robert
02/15/2026
Easy to install and works better than expected!
by:
Deborah Debbie
02/26/2025
It’s a great fit on our Ford Maverick. It is very easy to open up when we need to haul larger items and very easy to close when more room is not necessary. We are extremely happy with this cover and etrailer.com.
by:
Martin
03/03/2019
2018
Honda
Ridgeline
Clean look and easy to use. Still very satisfied with my purchase after 1 year. I installed it on a 2018 Honda ridgeline. My only complaint is when I purchased the product, it took them 3 delivery to provide the right attachment parts for my vehicle. Poor workmanship from the manufacturer. This problem as nothing to do with etrailer, which I'm happy with.
Martin H.
3/4/2020
Well, not so happy with the product. The carpeting fell off on the underside of the cover. Also the right side of the cover towards the tailgate shrank. Its been a few months since I started to have those issues and should of contacted you earlier for warranty. Hopefully its not too late for a warranty claim.
by:
Mike
12/31/2018
We bought (2) of these covers a year ago and would definitely highly recommend them. This is a well thought-out, nicely featured and well designed product of excellent quality. In the past we used Velcro strip hold-down "tarp-type" Tonneau covers in the past and will never go back. These covers roll up effortlessly and very quickly compared to the Velcro type. And, (as long as you keep the lock-down bar & track clean) they just as effortlessly roll out, lay down, lock down, and stay down - no stretching and having to take time working to get the tarp tight so that it doesn't "flap" in the wind. Wonderful product.
by:
Brent
12/16/2024
This is the worst tonneau cover I’ve ever dealt with in my life. The latching system is complete garbage. I have it adjust as far back as it can go and it does not leave the latches closed. You hit one bump one the road and it slides off the latch and the sides come up with any little gust of wind. I am currently on my 4th warranty claim with them in 11 months second full cover replacement. Wish they would just give me a refund.
by:
Timothy
12/28/2018
I am really glad I bought this cover. I looked and looked and ended up with this hardtop aluminum roll-up cover. It was easy to install, fits well and is secure. I am able to roll it up and snap it down and still pull a fifth wheel without having to remove the cover, a big plus.
My only issue is the tie down buckle and straps are poorly conceived. The snaps should be redesigned for easier access and use. One of the snaps broke early on and I had to find a replacement.
My only issue is the tie down buckle and straps are poorly conceived. The snaps should be redesigned for easier access and use. One of the snaps broke early on and I had to find a replacement.
by:
Rod C
02/17/2016
I purchased both the Bak Revolver 2 Tonneau and the B & W adapter for my companion 5th wheel hitch from trailer.
Both the product and service was great
Both the product and service was great
by:
David
01/29/2019
The roll up cover has performed very well in cold temperatures and warm. The top is water proof even when sprayed at the car wash. I like the security provided when the tailgate is locked. Overall very happy and would purchase this again.
by:
Logan
07/22/2018
2016
Chevrolet
Silverado 3500
Secure straps for when the tonneau cover is rolled up ripped out of the washers holding to the frame. Tarp pulled away from rubber seal causing water leak. Latches on the side of the cover dont always latch into the track.
by:
Larry
09/09/2022
I have found the cover easy to install. It still works fine 1 year later. It is easy to roll up using one hand. The only problem I experienced so far is occasinal failure of the wire to release the cover on the driver side of the cover when operatred from the tailgate on the passenger side. Its otherwise been a perfect product keeping even the worst rain and snow out of the back of my pickup.
by:
Ed C.
08/30/2017
GMC
Sierra
This BAK RevolverX2 tonneau cover is a high quality product that has performed well on my GMC Sierra 2500HD, it keeps my cargo safe, relatively dry and I save fuel. what more could ask for in a product.
by:
Ronnie E.
06/08/2020
I purchased this cover about a year ago for my 2019 Nissan Titan. I was happy with the appearance, it makes the truck stand out like no other. I can store things in the back, like luggage when traveling and it is secured and it will not leak. The cover itself is pretty sturdy, I have sit about 100 Lbs. on it and it doesn't bow in. I have the leather edition and it is easy to clean. It looks new even after a year, But maintenance is required to keep it looking good. Just keeping it clean and leather conditioner keeps it looking spectacular.
by:
Matt
11/21/2020
Perfect for the hard working truck fans! Great quality for the money! I love the fact that I can completely conceal my tools and gear without sacrificing the full use of the truck bed! Highly recommend!
Matt
11/22/2021
Couldnt be happier! Great quality product!
by:
Adam
07/11/2023
I have had this cover for one year and I would not buy it again. I read the reviews about how terrible this design is in climates that has freezing temps, but I live in New Orleans so freezing rain and snow was not a concern.
Turns out it’s not just cold weather and ice that ruins this, so doesn’t the sun and heat. The vinyl cover that you see when the cover is down is glued to a bunch of aluminum pieces and this design allows it to roll up and down. When the sun heats up the vinyl the glue separates from the aluminum sections and the cover will not roll up or down.
Don’t get me wrong, the concept is great, but the companies execution is off. I think I bought the second iteration and if I were you I would wait until the 6th or 7th version. They are far from getting this design right.
Turns out it’s not just cold weather and ice that ruins this, so doesn’t the sun and heat. The vinyl cover that you see when the cover is down is glued to a bunch of aluminum pieces and this design allows it to roll up and down. When the sun heats up the vinyl the glue separates from the aluminum sections and the cover will not roll up or down.
Don’t get me wrong, the concept is great, but the companies execution is off. I think I bought the second iteration and if I were you I would wait until the 6th or 7th version. They are far from getting this design right.
Jenny N.
7/17/2023
I am sorry to hear that this cover is not working out for you. Would you be able to send a picture of where the vinyl is separating from the aluminum?
by:
Byron S
10/18/2020
Love my BAK Tonneau cover. If there was one thing I've had an issue with is in the winter the track can freeze down and stop you from opening the cover. But other then that I am very happy with it.
by:
Tom M
04/20/2021
The felt-like lining that lies on underside of cover (and acts as cushion for rolling?) had bad glue job. This material came off in under 1 year. Appears that the glue was not meant for hot weather, as it came off in summer heat. Disappointed. Mfg website does not provide instructions on what glue to use to reattach, so had to experiment to find glue that would work to reattach. Perhaps in future they should use mechanical attachment instead of glue method...
25
46
true
Show More Reviews
See what our Experts say about this BAK Industries Tonneau Cover
- BAK Revolver X4s Hard Tonneau Cover for a 2018 GMC Sierra 1500 5-1/2 BedThe BAK Revolver X4s Hard Tonneau Cover that you need for your 2018 GMC Sierra 1500 with the 5-1/2' bed is part # BAK25VR. The part BAK79100 that you referenced fits older model GM pickups and isn't compatible with the 2018 model that you have. The Revolver X4s # BAK25VR is basically the exact same as the Revolver X2 # BAK39120 but with a matte black finish instead of the traditional glossy black finish on the X2. This matte black finish is becoming more popular because it matches the...
view full answer... - Which BAKBox Collapsible Toolbox Fits with BAK Revolver Tonneau CoverHey Chuck, since the tonneau covers part # BAK39120 and # BAK39130 are BAK Revolver tonneau covers the correct collapsible toolbox would be the part # BAK92125.
view full answer... - Will Thule TracRac SR Sliding Ladder Rack Fit with Tonneau Cover on a 2014 GMC Sierra 1500 Yes you can! The Thule TracRac SR Sliding ladder rack is one of the few ladder racks we carry that will allow you to install certain tonneau covers on your truck as well. If your pickup is the 2014 GMC Sierra 1500 that you put into the vehicle selection then the correct TracRac SR for you would be part # TH43002XT-782 for a 5-1/2' bed, part # TH43002XT-781 for a 6-1/2' bed, or part # TH43002XT-780 for an 8' bed. My favorite tonneau cover to recommend is the BAK Revolver X2. This is confirmed...
view full answer... - BAK Revolver Hard Roll-Up Tonneau Covers and Compatible Ladder Racks for 2016 GMC Sierra 1500The BAK Revolver X4 and X2 Hard Roll Up Tonneau Covers, when they are rolled up to the back of the cab window, will be approximately 9-inches in diameter for the 5-1/2-foot bed version, about 10-inches for the 6-1/2-foot bed version and about 12-inches for the 8-foot bed version. My contact at BAK who provided these figures said these are approximate dimensions only. The Revolver covers for the 2016 GMC Sierra 1500 are as follows: 5-1/2-foot bed models can use X2 # BAK39120 6-1/2-foot...
view full answer... - Comparing OEM Tonneau Cover REV for 2017 Chevy Silverado Crew Cab Short Box to BAK Revolver X2I did some research and reached out to my contact at BAK to get some information. They confirmed the REV brand is a private label of basically the same products in the BAK tonneau cover line of products. They have both a GM and a Ford line that is private labeled so the vehicle manufacturer can have their OEM option. For your 2017 Chevy Silverado 1500 Crew Cab with the 5' 8" bed, the BAK Revolver X2 Hard Tonneau Cover - Roll Up - Aluminum and Vinyl # BAK39120 is the correct fit and the...
view full answer... - Which Tonneau Cover Is Recommended to Fit with TracRac Sliding Ladder Rack on 2016 Chevy SilveradoSome people have had luck installing a sliding Thule TracRac like the part # TH43002XT-782 with the BackFlip MX4 like the part # BAK48120 that you have installed on your 2016 Chevy Silverardo 1500 5-1/2 foot bed. That said the issue isn't so much the folds interfering with the uprights as much as it is the base rails of the rack not allowing the cover to fold. This is due to the tonneau covering a small part of the bed rail cover like what you have in your picture. The only tonneau we...
view full answer...
- BAK Tonneau Cover and Thule TracRac SR Sliding Ladder Rack Compatibility for 2018 GMC Sierra 1500The series of BAK hard tonneau covers that is confirmed to be fully compatible with the Thule TracRac SR Sliding Ladder Rack systems is their Revolver series, both the X2 and X4s versions. The BAKFlip you're looking at will technically install with the TracRac SR but you'll have to adjust the ladder rack back and forth to open and close the cover. Here are the Revolver covers which fit the various bed lengths of the 2018 Sierra 1500: 5-1/2-ft bed: Revolver X4s # BAK25VR and Revolver X2...
view full answer...
- Thule TracRac System For Chevy 1500 Plus Tonnueu CoverThe Thule # TH43002XT-782EX TracRac System with Cantilever is sized for a 5-1/2 foot bed and is not available in black but rather silver double-coat powder finish. This finish is applied over aluminum so you will not have corrosion issues. Tonneau covers known to fit are the Bak # BAK79120 Revolver X4 roll up cover. The X4 model has beefier locking latches and heavier look and feel of the vinyl. After initial setup of your ladder rack you may find that you could benefit from more...
view full answer... - Solution for Needing Replacement GM Tonneau Cover Tarp for 2015 GMC Sierra 1500 5.5 ft BedWe don't have a replacement tarp for what you have but we can help you with an entire replacement tonneau like the BAK Revolver X2 # BAK39120 which is a confirmed fit for your 2015 GMC Sierra 1500 5-1/2 foot bed. GM can probably get you the part you'll need but it's most likely going to cost more than just replacing the entire thing with the BAK.
view full answer... - Which BAK Revolver Tonneau Cover Fits 2019 Ram 1500 5-1/2 Foot BedThe big difference between the BAK Revolvers you mentioned is that the # BAK39227 fits the new body style 2019 Ram 1500 5-1/2 foot bed trucks and the # BAK39120 fits 2014 through 2018 GMC/Chevy 1500 trucks with a 5-1/2 foot bed. While the dimensions would be similar you'd need the # BAK39227 since you have the 2019 Ram. The other number would not fit.
view full answer... - Will The TracRac SR and the Revolver X2 Work Together On My 2017 GMC SierraThe BAK Revolver X2 Hard Tonneau Cover part # BAK39120 and the TracRac SR Sliding Truck Bed Ladder Rack part # TH43002XT-782 are both a confirmed fit for your 2017 GMC Sierra, if you have a 5-1/2' bed. For a 6-1/2' bed, you will want part # BAK39121 and part # TH43002XT-781. In addition to both being compatible with your truck, they will also both work with one another as the TracRac SR mounts to the top of the trucks bed rails and the Revolver X2 mounts just inside the bed rail lip. Therefore,...
view full answer... - Recommended Ladder Rack and Tonneau Combination for 2015 Chevrolet Silverado 1500Combining a ladder rack and tonneau cover can be tricky. Not only do they need to install together but they need to be able to be used together. Luckily I have a solution. The TracRac SR Ladder Rack # TH43002XT-782 installs into the stake pockets of your 2015 Chevrolet Silverado 1500, as long as you have the 5-1/2 foot bed. The tracks are on top of the bed rails and easy to remove when you don't need it. Since it installs on top of the rails you'll be able to use a tonneau cover that...
view full answer... - Differences Between BAK Revolver X2 Tonneau Covers EX39120 and EX39130The difference is the year GM trucks they fit. The part BAK Revolver part # BAK39120 fits: 2014 - 2018 GMC Sierra 1500 5-1/2 Foot Bed 2014 - 2018 Chevrolet Silverado 1500 5-1/2 Foot Bed And then the part # BAK39130 fits the newer versions of the same truck basically: 2019 - 2020 GMC Sierra 1500 5-3/4 Foot Bed 2019 - 2020 Chevrolet Silverado 1500 5-3/4 Foot Bed
view full answer... - Recommended TracRac SR Truck Bed Ladder Rack for a 2017 GMC Sierra 1500I do have a sliding ladder rack confirmed to fit your 2017 GMC Sierra 1500 but according to the manufacturer, the TracRac SR Sliding Truck Bed Ladder Rack w/ Over-the-Cab Extension part # TH43002XT-501EX will not work as it is only designed to work with a GMC Sierra 1500 from 1999-2013. For a sliding ladder rack that is confirmed to fit your vehicle, I recommend using the TracRac SR Sliding Truck Bed Ladder Rack w/ Over-the-Cab Extension part # TH43002XT-782EX for the 5-1/2' bed and part...
view full answer... - Recommended Ladder Rack w/ Cantilever for a 2015 GMC Sierra 1500 w/ a 5'9 Bed and a X2 CoverHey Justin! There's only one ladder rack with a cantilever that fits your short bed 2015 GMC Sierra 1500 and is compatible with the BAK Revolver X2 Hard Tonneau Cover item # BAK39120. It is the Thule TracRac SR Sliding Truck Bed Ladder Rack w/ Cantilever item # TH43002XT-782EX. The Thule item # TH43002XT-782EX has a sliding base that attaches to the stake-pockets on top of your Sierra's bed. This is what makes it compatible with your X2 cover. This ladder rack has a 1,250 lbs capacity...
view full answer... - Will TracRac SR Sliding Truck Bed Ladder Rack Work With BAKFlip Revolver Tonneau CoverThe installation of the TracRac SR Sliding Truck Bed Ladder Rack, part # TH43002XT-782 on your 2014 Silverado 1500 should not interfere at all with the BAKFlip Revolver Hard Tonneau Cover, part # BAK39120. The # BAK39120 is installed on the inside of the bed rails and will work great with the ladder rack.
view full answer... - Tonneau Cover and Ladder Rack Recommendation for 2014 GMC Sierra 1500 Short BedFor your 2014 GMC Sierra 1500 there's only one tonneau cover we can recommend that allows you to also be able to install a sliding Thule ladder rack. For that you'd need the part # BAK39120 which is a roll up style cover that fits well between the base rails and uprights of the Thule ladder rack. Other covers like your folding cover may have interference as you try to fold them up with either the uprights or the base rails. For a sliding ladder rack that fits your truck you'd then want...
view full answer... - Ladder Rack and Tonneau Cover that Can be Used together on a 2015 Chevy Silverado 5-1/2 Foot BedA great ladder rack/tonneau cover for your 2015 Chevy Silverado is the Thule SR sliding rack # TH43002XT-782 with the BAK Recolver X2 # BAK39120. A lot of times ladder racks and tonneau covers occupy the same mounting locations so they can't be installed together. In addition to that, there's even more that can be installed together but will make contact while opening the cover. Since the Revovler X2 is a rolling hard cover and sits further inside the truck's bed rails it doesn't make...
view full answer... - Will BAK Revolver X2 Or X4s Fit A 1999-2006 Silverado/Sierra With A 6-1/2' BedYes, they will fit. I compared a 2004 Chevrolet Silverado 2500 with the 6-1/2' bed to a 2004 GMC Sierra 2500 with a 6-1/2' bed. Each of these vehicles is compatible with the BAK Revolver X2 Hard Tonneau Cover - Roll Up - Aluminum and Vinyl, part # BAK39101, and the BAK Revolver X4s Hard Tonneau Cover - Roll Up - Aluminum and Vinyl - Matte Black, part # BAK62FR. They BAK Revolver X2, part # BAK39120, you attached to your question is compatible with the 2014-2018 Silverado/Sierra with...
view full answer... - Will the BAK Revolver X2 Fit a 2018 Chevrolet Silverado 1500 with Drop-In BedlinerThe drop-in bedliner on your 2018 Chevrolet Silverado 1500 (5-1/2' bed) will not interfere with the BAK Revolver X2 Hard Tonneau Cover part # BAK39120 There may be slight trimming involved but other than that there won't be any issues. I confirmed this with my contact at BAK Industries and also attached a review video for you as well.
view full answer... - Recommended Tonneau Cover with Thule TracRac Ladder Rack on 2018 Chevy Silverado 1500The Thule TracRac SR Sliding Truck Bed Ladder Racks actually represents one of the few ladder racks available that are compatible with tonneau covers because they mount to the top of the bed rails. This leaves the inside of the bed rails free to accommodate mounting hardware from inside-the-rail tonneau covers. If your Silverado has the 5-1/2 foot bed you will need part # TH43002XT-782, for the 6-1/2 foot bed you will need # TH43002XT-781, and for the 8 foot bed you will use part # TH43002XT-780....
view full answer... - Tonneau Cover Compatible with Adarac Aluminum Ladder Rack A4001234The BAK BAKFlip G2 hard tonneau cover # BAK26309 that fits the 2014 Ford F-150 5-1/2-foot bed without the Bed Cargo Management System is not compatible with the Adarac ladder rack # A4001234. The reason is that this ladder rack has uprights that lean inward; these would interfere with the hard cover as you tried to fold it up toward the cab. A soft roll-up tonneau cover will work and we have covers from Access like their LiteRider # 834532004737 and their Vanish # 834532007646 shown on...
view full answer... - Will BAK Revolver X2 Toneau Cover From 2017 Silverado Fit 2019 Silverado 1500Your new 2019 Chevy Silverado 1500 with the 5-1/2 foot bed will require the BAK Revolver X2 Tonneau Cover part # BAK39130 like you mentioned. The bed design differs enough from the 2017 model Silverado that a new cover is needed. Unfortunately your existing # BAK39120 model will not fit. This cover is only compatible with the Silverado up through the 2018 model year.
view full answer... - Will Thule TracRac SR Sliding Rack Fit 2018 GMC Sierra 1500 with 5-1/2 Foot Bed & Tonneau CoverThe Thule TracRac SR Sliding Truck Bed Ladder Rack # TH43002XT-782 will fit your 2018 GMC Sierra 1500 with a 5-1/2 foot bed, but you'll need one of the following BAK tonneau covers: - BAK Revolver X2 Tonneau Cover # BAK39120 - BAK Revolver X4s Tonneau Cover # BAK25VR These are the two tonneau covers we know will work because both leave the stake pockets open on your truck. and also roll up instead of fold up so the cover won't interfere with the rack when you are opening or closing it.
view full answer...
Do you have a question about this Tonneau Cover?
Info for this part was:
Edited by:
Tyler C
Written by:
Tricia G
Expert Research:
Jameson C
Video Edited:
Kathleen M
Video Edited:
Chris R
Installed by:
Randy B
Updated by:
Wilson B
Updated by:
Jenny M
Video by:
Zach D
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Bob B.
11/21/2017
Still water resistant, works well, and looks great