bing tracking image
  1. Tonneau Cover
  2. etrailer
  3. Roll-Up - Soft
  4. Low Profile - Top of Bed Rails
  5. Aluminum and Vinyl
  6. Matte
THIS ITEM IS NOT A FIT FOR
2002 Subaru Forester
etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
etrailer

etrailer Soft Tonneau Cover - Roll-Up - Vinyl and Aluminum

Part Number: e96RV
In Stock
$254.99
Tonneau Cover
Not Confirmed to Fit

2002 Subaru Forester

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Videos

etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
A high-quality soft, roll-up tonneau cover at this price? You bet. It may not have all the fancy extras that some of the other national brands have, but if you're looking for the best value for your money our etrailer cover can't be beat. Great Prices for the best tonneau cover from etrailer. etrailer Soft Tonneau Cover - Roll-Up - Vinyl and Aluminum part number e96RV can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (123)
  • Q & A (0)
  • Videos (1)
  • Photos

etrailer Tonneau Cover - e96RV

Highlights

  • Custom Fit for Your Vehicle: Secures to your truck bed with model-specific clamps and hardware
  • Keeps Gear Dry: Weather seals keep out water without needing drain tubes.
  • Full Bed Access: Rolls up completely so you can haul large items when needed.
  • Tight, Clean Look: Manual tension control keeps the vinyl cover smooth and secure.
  • Quick Install: Clamps on inside the bed rails with no drilling required.
  • Low Profile Style: Sits just 1-1/4" above bed rails for a sleek, flush fit.

Features to know about

Full Bed Access: Roll-Up Design

When you need to haul taller gear or bulky cargo, you can roll this cover all the way up to the cab for complete bed access. The soft vinyl top secures with hook-and-loop fasteners along the rails, so it stays tight when closed and rolls easily when open. You don’t have to remove it or block your rear window just to load up bigger items.

Clean, Low-Profile Look: 1-1/4" Above Bed Rails

Some covers sit high and break up the truck’s lines. This one keeps a streamlined look, measuring only 1-1/4" above the bed rails. The textured matte black finish blends in and looks sharp while staying practical for everyday use.

Reliable, Simple Security: Dual Tailgate Latches

Quick-release latches on both sides of the tailgate make it easy to open the cover when you need to, yet it stays secure when the tailgate is locked. The setup gives you straightforward protection for tools, groceries, or weekend gear.

All-Weather Coverage: Vinyl with Aluminum Frame

Rain, dust, and road grime stay out thanks to integrated weather seals. The vinyl cover and aluminum side rails and bows create a sturdy, lightweight combination that resists sagging and helps keep your cargo dry—no drain tubes required.

Quick Setup: Clamp-On Installation

There’s no drilling or complicated tools needed. The side rails clamp inside the bed rails for a snug fit that installs quickly and stays put. Once it’s on, the manual tension control lets you fine-tune the cover’s tightness so it always looks neat and performs right.

Specs

Dimensions

  • Height above bed rails: 1-1/4"

Construction

  • Material: Vinyl with aluminum side rails and bows
  • Color: Textured, matte black

Warranty

  • Limited lifetime warranty

e96RV etrailer Soft Tonneau Cover - Roll-Up - Vinyl and Aluminum - Tonno



This Product Fits The Following Vehicles




Video of etrailer Soft Tonneau Cover - Roll-Up - Vinyl and Aluminum
Video Thumbnail Video Player Dialog

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Review of the etrailer Soft Tonneau Cover

Hi, Matt with etrailer, and today we're talking about the line of etrailer soft roll-up tonneau covers. And this is gonna be on our GMC Sierra today, but this is going to come in multiple variations or fits, so what I recommend doing, is just plugging your vehicle's information into our fit guide to find what's gonna be the best fit for you. This is gonna be a soft roll-up tonneau cover, and you're mainly gonna have two types, and you're gonna have your hard tonneau covers and your soft tonneau covers. Your hard tonneau cover is gonna be more for security. So if you have anything really important in the back, this would keep those items secured so no one can access them. While the soft tonneau cover like we have today, is just gonna keep things more out of sight and outta mind.

So, I'd recommend keeping things less valuable back here, but it's also gonna be a lot easier to work with, being able to roll it up completely, save a little bit of extra space, and it's still gonna give you a lot of the same benefits giving you a clean finish on top of your truck, and we're gonna help you with that fuel economy too. This is a roll-up style, (tailgate thudding) so, how that's gonna work is you're just pulling these levers, (cover thudding) and release this. And since this is soft too, (fasteners scratching) it really binds into itself really nice. (fasteners scratching) You really start to notice it at the very end when I have it right here next to our truck, or the cab of our truck. And how that's gonna operate is when you have any boxes, maybe you wanna push all the way back here, this is gonna have the ability to really push into itself.

So if you are a little crammed for space, you should should still be able to maneuver this a little bit. And you're gonna secure this down. You have a couple buckles that you'll just wrap it around and secure to the other side. And this is how it's gonna be when you're in the open position, (buckle clicking) and you can tell this gives you a really good fit. I only have one one on right now, but I'm not worried about securing this at all.

(buckle clicking) And if you need to tighten it down a little bit more, if you've noticed things have shifted a bit, you can just adjust these buckles and give this a tight fit. If you are looking at soft tonneau covers, you're gonna have two choices. You're gonna have those fold-up options and you're gonna have those roll-up options. Both of them are gonna give you that protection on the back of your bed from any elements from outside, like rain, and they both are gonna give you more of a clean finish on the back of your vehicle too. Now, one of the major drawbacks to a fold-up tonneau cover is you're only gonna have two thirds of your bed that you can really use or access.

The roll up tonneau cover really solves that issue because it's gonna be able to roll up into itself, giving you a lot more bed access. And it's really my choice of a roll-up tonneau cover, because like I just said, it's gonna give you more room. We can take a deeper look at how this is all gonna work. So we're gonna have these clamps that are gonna attach your rails, to your bed rails. And what I really like about these clamps is they don't require any tools. It's just a knob on here (knob clicking) that you tighten up. And so if you ever needed to remove your entire tonneau cover, you wouldn't need any tools to do that. And how those rails are gonna sit on top of your bed rails, if you notice at the very back, we're gonna obstruct our stake pockets just a bit, so if you are wanting to use these, this might be an issue for you, so definitely reassess what accessories you have. And right next to that, we're gonna have this tensioner. I'm a big fan of this tensioner because with a vinyl tonneau cover, it's eventually is gonna start to stretch, that's with any soft type of tonneau cover. So what this does is you can adjust this really easily to help keep that tension on your cover. And you can really see what I'm talking about when I start to unroll this, (cover flopping) because right now it looks pretty loose, you can see a lot of wrinkles in the tonneau cover itself, but once I get to the very end, the way this is gonna really seat into (tensioner clicking) that tensioner, it's gonna tighten itself up. Removing all those wrinkles. Giving you that more smooth look on top. And afterwards, just come back through the sides and apply pressure to the hook and loop system we have on our bed rails, so we can really secure our tonneau cover to the rails. I know I talked about this being weather resistant, so let me show you what I'm talking about. So we're gonna have this rubber seal at the very end of the tonneau cover that'll press up against your tailgate. And next to that we're gonna have these foam gaskets on our corners, along with some additional padding going down the sides. And one of the things I really like about it is we're gonna have these aluminum rods that go all the way across, and kind of makes this bow up a little bit, and that's gonna help with water runoff so you don't have it pooling on top of the cover. Now no cover is completely waterproof. You're always gonna get a little bit of water getting into your tonneau covers, but I think for this one being a soft tonneau cover, it's gonna do a really good job with it. This is actually one of our coworkers, Dan's truck, and he's been driving around with this tonneau cover for a bit. He really likes it, especially with the amount of water it is keeping out. And it is flapping around in the wind just a little bit, but that's gonna be something you face with any soft tonneau cover, 'cause as you can see, just that material is just gonna wanna really move to any high winds you drive through. But that's pretty common with any soft tonneau cover. And honestly, I think the soft roll-up tonneau covers are gonna do most people just fine, because if you are just looking for that basic weather protection, this is gonna get the job done. Well that's just a look at the line of etrailer soft roll-up tonneau covers. Thanks for watching.

Customer Satisfaction Score:

Ratings & Reviews

4.7

123 reviews
5 Stars
(96)
4 Stars
(22)
3 Stars
(1)
2 Stars
(3)
1 Star
(1)
Review Sort Icon
by:
2024 GMC Sierra 2500
Perfect fit…looks great!! Thanks
by:
2022 Chevrolet Silverado 3500
Looks great so far and install was super easy
by:
2024 Chevrolet Silverado 3500
by:
2023 Chevrolet Colorado
The box arrived via UPS and the entire setup from receiving the box to having it fully on the truck was 18 minutes.

The instructions are very easy, and no extra tools are needed. The only tool you need is a hex key and it's included.

I found the initial connect from the frame rail to the front rail/tonneau was annoying because while you are doing that it's very easy to push a rail off the top edge which could probably scratch the paint on the bed if you aren't careful.
It didn't happen for me, but it's something to think about.
To avoid that you only really to be aware that it could happen and be careful, but having a helper hold the tailgate end, throwing a strip of painters edging tape or even loosely fitting one of the clamps which holds the rail to the bed at the tail gate end would avoid that possibility.

Other than that, it fits well, it feels well built and I'm really happy with the purchase.
Mike L. profile picture
Etrailer Expert

Mike L.

5/11/2026

Good job Troy, the tonneau cover looks great on your truck!

by:
2017 Chevrolet Silverado 1500
I like it,the looks,low profile, and overall clean look.I am skeptical about the velcro holding up over time.I see a lot of trucks going down the road with cover blowing because velcro isn't doing it's job.We will see.
Kate F. profile picture
Etrailer Expert

Kate F.

7/13/2026

New cover looks great Randy!

by:
It’s a good tonneau cover. Seals good. When you roll it up the hardware design makes it a bit bigger than others. I had a rattling noise after installing it and took me a bit to find it because it sounded like it was in the cabin. It was the fastener for when you roll it up to keep it rolled up hitting my rear glass. I put a piece of Velcro patch on my window to stop it. The soft side. I’ll try to load a pic to show you. Installed on a 2026 Canyon you may find another way to stop the noise but it worked.
Nick S. profile picture
Etrailer Expert

Nick S.

1/19/2026

I am glad you are liking the cover overall. Good catch on the latch by the cab, Velcro has been my go to solution as well. It looks great fully installed as well.

by:
2018 GMC Sierra 1500
Great quality and value. Took me longer to get rid of the packing materials than installing the cover.
Heather A. profile picture
Etrailer Expert

Heather A.

5/26/2026

Wow that looks great John! What are you using the cover for?

by:
2026 Chevrolet Colorado
Excellent. Fits perfect. Took me less than 15 minutes to unbox and completely install. The video was a huge help. Looks great on my 2026 Colorado Trail Boss. Worth every penny
by:
I thought maybe I could use the old side rails but it wasn't possible. Only took about 20 minutes to replace the whole thing. Nice fit and should keep things dry.
Lazer S. profile picture
Etrailer Expert

Lazer S.

10/12/2026

Glad to hear it wasn't too difficult to install, Andrew! Out of curiosity, what was the old cover you wanted to use the rails from?

Andrew profile picture

Andrew

10/12/2026

It was the OEM cover that came from GM. It had the Chevy logo on it. The release had 2 small chord strings that release the cover so it can roll up. I traced the part numbers that were on the cross brace and that brought me to trailer. Very similar to the new cover but just different enough making it unusable. Cover was on a 2018 Colorado. It eventually dried up and shrunk. Cover wouldn't stretch far enough to reach the rails. Lasted about 8 years and looked like the same material as oem.
Andrew profile picture

Andrew

10/12/2026

Answering your question...not sure who made the oem cover. No label. Just says 427219A33 made in Mexico
Lazer S. profile picture
Etrailer Expert

Lazer S.

10/12/2026

@Andrew Gotcha. Someone does make those covers for GM, but we haven't been able to find out exactly who it is yet (we know it's Truck Hero/RealTruck, but that's a parent company and they won't tell us which offshoot it is). Someday we will figure it out though. ^___^
by:
Perfect fit on my 2018 Silverado. Good quality product at a great price. Fast delivery. Always have had good luck dealing with trailer.
Randy N. profile picture

Randy N.

9/20/2025

After a year of use and traveling, this tonneau cover still looks and fits like brand new. I will purchase this cover for my next truck rather than one from the dealership.

by:
Overall a nice unit. The stays are not great they do however as designed to allow water to run off the cover. I would prefer the round stronger ones with the cover attached in the middle to keep down the wind slap. The design of the latches and the stays does not allow an easy roll up. As with most soft covers the seal is not 100 percent.
by:
ford F-150
I’ve had the roll up bed cover on my F150 for about a year now, and it is working great. I am happy with the durability and the ease of use of this cover. The price was right and I feel like this was a great purchase.
Ryan profile picture

Ryan

5/6/2026

I have had the roll up cover on for about 2 years now, and it is still holding up great. I am still very satisfied with the price and quality.

by:
I’m 62 and this is my first tonneau cover and I love it. It was so easy to put on and only took me about 10 minutes. It fits perfectly and keeps my stuff dry. Also shipped very quickly and packaged well. Thank you
by:
Moving boxes to storage today in the pouring rain, I was so happy once again to have this vinyl cover. It has held up very well over this past year, with many trips to drop leaves and branches to our local composting place. I don't have to worry about things flying out on the road as I drive, and the tough vinyl has not punctured from tree branches. My only complaint is that the weatherstripping across the front behind the cab is not long enough to seal off water from running into the bed. The bow of the metal rib is high enough that the weatherstrip folds into the bed. If I adjust and move the front end closer, I don't have protection at the tailgate. A relatively easy fix to add a wider piece of rubber, but it would be perfect if they used a 4" wide piece of rubber.
by:
The installation of the cover went well. Good instructions. When I finished and pushed the back of the cover down to the tailgate I was really impressed by the way the cover looked. Very professional looking. Etrailer is the best supplier for me.
by:
Very simple to install. Stretches tightly over bed with no flapping. Kept gear dry and no worries about anything blowing away.
Had to adjust to seal over tailgate by adjusting position further back.
by:
Product is excellent. Directions on installation are lacking in some of the description. Once I figured it out ie read the directions. It was fine. Impressed with the quality of the product.
by:
Easy to install. Fit perfectly on my truck out of the box but has easy adjustments. Went through the car wash, no leaks. Looks great! Really easy to unlatch and roll up. Exactly what I was looking for. Would recommend. Great product.
Brooke M. profile picture
Etrailer Expert

Brooke M.

4/8/2025

Looks OEM! Thanks for sharing a photo, Shane - do you have any install tips or tricks you learned along the way?

by:
The front rubber seal needs to be at least 1to 2inches wider to seal the area between the cab and the box. Good quality and good instructions.
by:
2021 Chevrolet Colorado
While I gave you a 5 star, that is based on my satisfaction from purchases in the past. This shold be no diffrerent. The Cover was an exact fit, and the snap down was somewhat difficult, but maybe because it was 30Degrees when I put it on. However, it did "snap" i nplace, and was very tight. Looks good on my 2021 Chevy Colorado Z71, and only the test of time will tell if teh 5 stars stay or not.
Thank you for the videos as they convinced me that the eTrailer was the one to buyt for a few reason. Good value (Not the cheapest out there), Good Looks, God Revews,and a Great Warranty.
I will try and get some pictures posted soon
Larryw -. profile picture

Larryw -.

12/27/2025

Generally speaking the cover had been very good, I will go with 4* however the cable that pulls the latch, in order to rollback the top cover had broken, And I contacted etrailer to see what could be done and they were clueless. So I had to take it upon myself to get my own cable and a cable crimp and fixed it myself. There was no compensation for warranty unless I sent the whole thing back, and to be honest thats 100 percent BS.

by:
2024 Toyota Tundra
Installation of the etrailer Soft Tonneau Cover was easy. I like that the tension adjustment blocks are conveniently located at the tailgate end. All the weather gaskets are integral to the system (no separate weather strips to apply separately and fall out of position, later). The special clamping brackets, unique to my Toyota Tundra, insert easily into the deck rail tracks and are secured with large hand knobs versus wrenches. Bonus! The rail tracks remain functional for subsequent cargo tie downs. Overall, very good fit on my 5.5 ft truck bed. See photos.
Bill profile picture

Bill

9/20/2025

After a year the cover is working just fine. I like how it rolls up to the cab allowing full visibility through the rear window. And I can use the full truck bed when required.

by:
I little tough to get on and centered (left, right, front, back).
Once in proper place fits perfectly and looks good.
by:
2018 Ford F-150
I'm giving 5 stars, because I knew what I was buying.

etrailer was awesome. The ordering and shipping process was seamless, I received several emails regarding the status of my order, and it was on my step when they said it would be.

As for the product itself, I did not have unrealistic expectations about buying a $200 tonneau cover. I just wanted something to keep the majority of the elements and prying eyes out of the bed of my truck. This cover does that. If you are overly obsessive with appearance, spend more money. The cover itself is straight and neat, but the fit and finish isn't. The lines of the cover do not sit with the lines of my bed. I had to scoot it rearward almost 2 inches so the cover would extend to the top of my tailgate. The weather stripping is just barely on the top of the front bulkhead and tailgate. I thought at first I may have received the wrong cover, but I made it work. I expected to need additional weatherstripping if I want a weather tight fit, and I was right. But as I said earlier, I knew what I was buying. This truck is 6 years old and over 100k miles. This cover will do what I need it to do without spending too much money.
William profile picture

William

5/5/2025

One year in, and this cover is holding up well. Ive only adjusted the tension once. No rot, sun fade or tears I park outside 247. It rolls up out of the way so I can have full use of the bed. No complaints.

by:
Easy install, low profile. Perfect replacement for my worn out Truxedo soft cover.
by:
dodge Ram Pickup
Works well and looks good. Thought it was going to be a little short for my Ram short bed but it stretched out.
Opens and rolls easily. Closes solid.
25
123
true
Show More Reviews

See what our Experts say about this etrailer Tonneau Cover


Info for this part was:

Employee Lindsey S
Updated by:
Lindsey S
Employee Wilson B
Updated by:
Wilson B
Employee Michael B
Updated by:
Michael B
Employee Leah S
Edited by:
Leah S
Employee James M
Written by:
James M

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.