Yakima LockNLoad Platform Rack for Raised Rails - TimberLine Towers - Aluminum
Item # Y59PB
Our Price: $1,193.80
Confirmed to Fit
2014 Toyota 4Runner
excluding Trail
Trail
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
- All Info
- Reviews (25)
- Q & A (0)
- Videos (25)
- Photos
Yakima Roof Rack - Y59PB
- Platform Rack
- Requires Fit Kit
- Yakima
- 60L x 54W Inch
Designed for use in the Australian Outback, this rugged platform lets you bring whatever gear you might need for your next adventure. Compatible with many Yakima off-road and traditional roof rack accessories.
Features:
Yakima LockNLoad Platform B, 60x54:- Rugged platform lets you build a large aftermarket roof rack that's perfect for off-road use
- Pair with Yakima towers and SL adapters to create a complete roof rack
- Large, flat surface accommodates more diverse loads than traditional crossbars or roof baskets
- Perfect for road trips, camping, and overlanding - a great fit for any outdoor lifestyle
- Horizontal slats accommodate clamp-on accessories like bike racks, kayak carriers, or a roof top tent
- Integrated channels accommodate various off-road accessories (sold separately)
- Compatible with perimeter rails, off-road lights, jack holders, spare tire carriers, jerry can holders, and more
- Built-in wind deflector reduces wind noise and drag
- Rugged construction designed for off-road use and tested in the Australian Outback
- Aluminum frame with black powder coat is durable and rustproof
- Assembly required
Yakima LockNLoad SL Adapters:
- Heavy-duty adapters let you mount a LockNLoad platform directly to Yakima SkyLine, TimberLine or TrackTower towers
- Requires 1 set of adapters for each pair of towers in your application
- Works with all platform sizes
- Structural steel construction with black powder coat is durable and rustproof
- Simple bolt-on installation with included hardware
- Secure the adapters directly to towers and then attach to platform mounting points
Yakima TimberLine Towers:
- 4 Heavy-duty towers mount Yakima crossbars to your vehicle with raised, factory side rails
- Safe and easy installation with rubber-coated stainless steel straps
- Straps wrap completely around raised side rails for maximum security
- Included torque tool clicks 3 times when straps are secure - eliminates fear of under- or over-tightening
- Lockable with Yakima Same Key System (SKS) lock cores (Y07204 - sold separately)
- Weather-resistant stainless steel, glass-reinforced plastic, and elastomer construction
8005042 LockNLoad SL Adapters for Yakima SkyLine, TimberLine and TrackTower Towers - Qty 2
8005045 Yakima LockNLoad Heavy-Duty Roof Rack Platform - Size B - Aluminum - 60" Long x 54" Wide
8000164 Yakima Timber Line Roof Rack Towers for CoreBar, JetStream, and RoundBar Cross Bars - Raised Side Rails - Qty 2
Replaces 8000147
Video of Yakima LockNLoad Platform Rack for Raised Rails - TimberLine Towers - Aluminum
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Yakima JetStream Crossbars Roof Rack Kit Review - 2023 Volkswagen Tiguan
Hi everyone, Aidan here with etrailer. Today we're gonna be taking a look at and later we'll be showing you how to install this Yakima JetStream Roof Rack System on our 2023 Volkswagen Tiguan. This is the one with the 50 inch long crossbars, but we offer a kit here at etrailer with a 60 inch long crossbar. But the beauty of these Yakima bars is that they have a continuous channel on the underside. So in theory, you could get an even longer bar if you wanted. I don't know that I would.
I think the 60 inch long kit is gonna be more than enough and offer just a bit more crossbar overhang here if you need it. But just know that it's available. And depending on your needs, you can go with one of those two kits. You maybe would go with that crossbar overhang if you had a load assist kayak carrier that needs more clearance from the side of the vehicle. But if you don't have an accessory like that, this is the kit I would go with because it's gonna be a bit more of a clean install.
Roof racks in general, I think they're a great option to expand the functionality of your vehicle. For one, it's the best place to go for larger items like kayaks. You could always go with a trailer, but that's a whole can of worms. And if you have something like a roof box, again, the roof is a great place to go with that. You can expand your cargo space up top without adding length to your vehicle.
And I think for the Tiguan, this makes a ton of sense because you have these raised rails that's a feature that's already on your vehicle. We're just gonna utilize them to attach this roof rack, which makes a very simple install and can be quickly removed if we don't wanna leave the roof rack on there all the time. The basic way this one works is you've got this band, it's got a metal core around that rubber band that will wrap around the bar and clamp to it, giving you a really strong hold. Other brands like the option from Rhino-Rack will have a clamp that kind of goes around the bar rather than fully encapsulating it with that band. So both options work great.
Some people might like this Yakima one because it fully wraps around. Others might like the Rhino-Rack option because it sits a little bit lower to the ground or to the roof rather, and gives maybe a sleeker appearance. But personally, I think either way you go, you can't go wrong. They're both gonna be solid. The core of your system though is going to be these JetStream crossbars, thicker in the front and tapering off towards the back. It's gonna help them be a little bit more aerodynamic and not have as much wind noise. They're perfect for clamp around accessories because that flat top makes for a good stable base and it's a great size for most of those clamps to attach very securely. And if you don't want to use a clamp around accessory, maybe you've got something that can mount into a channel. They do have this track up top that you can slide those channel mounted accessories into and keep them all inside the bar making for a clean install. Now, there's a weather strip here that will help block out wind noise. Your channel mounted accessories will just compress that strip wherever they sit, so no need to trim them to length or anything like that. It makes, again, for just a cleaner install. Some measurements to think about here. Your crossbar spread can really be whatever you want it to be. You don't have fixed mounting points on your raised rails, so you can clamp these wherever works best for you and your accessories. But one thing you do need to watch out for is clearance with your roof. So I'm gonna go from the tallest point on this corrugation here. And from that tallest point to the bottom of the bar is gonna be two and a half inches, so there's not a ton of room there. Certain clamps might take up more room than others, so maybe look for low profile clamps. Particularly on Yakima's roof boxes, they've got great clamps that don't sit very tall at all and would be perfect for something like this. The thing I don't love about this system is those legs, they're a bit bulky and because they don't conform around the bar, they kind of just sit on top of the bar. It doesn't look like a very nice fit. Again, it's stable, it's not going anywhere, but especially compared to that option from Rhino-Rack, I like the look there a lot better, but I think functionally the Yakima one's gonna work a bit better with the extra roof clearance and the nicer channel up top for channel mounted accessories. Regardless of which way you go though, the install is gonna be probably the next most important part. And for this, it's gonna be really straightforward. So we'll walk you through that process right now. So the first thing is take your crossbar and flip it over. That'll reveal the channel on the underside that our legs will attach to. That block will slide into this channel. So just take out your end cap and slide that leg in, making sure that it kind of tapers out to the outside edge. If you're having trouble getting this in, just take your tool and maybe loosen up that T block a little bit. Chances are it's just a bit too tight. Once you have both installed, there's gonna be a small line on the underside of those legs and we just wanna measure between those two lines and make sure that it matches up with the same measurement as we can take between the two raised rails on our Tiguan. That just lets us know how far apart these legs need to be. For us today, I'm shooting for 42 and a half inches between those two lines, and I just need to scoot it out a little bit more and just know that wherever you plan on installing these, that measurement could be completely different for you because the roof of our vehicle is gonna be a bit wider in front and taper off towards the rear. So for our rear crossbar that's already installed over there, actually had a measurement of 40 inches between the two. So almost a two inch difference here and that's just something to consider. When you have the positioning where you like it though, take that included the Yakima tool and tighten down those T bolts with those T blocks completely. There's another bolt tucked in the leg back there, and it's gonna control the side to side movement of our leg. Make sure you tighten that up too. If your vehicle had more of a taper, I'd say, then try to adjust that angle. But on our Tiguan, we can just keep it straight like this and it'll be fine. Once the tool clicks, we know it's properly torqued down and that's gonna be true for every single bolt on the whole roof rack here. So just keep that in mind too. We'll take this up to the roof. If you have an extra set of hands to feed the other side through, you can, but you can do it on your own too. Just get that set in place loosely and then feed the band under the bar on both sides, making sure that that line we saw earlier is the part that's resting on top of your raised rail. You can take that band and hook it into that little cleat right there. And before we start tightening things down, maybe a good time is now to take some measurements. You can go from a fixed point on your raised rail to the center of the bar on both sides to make sure that this is running perfectly straight side to side. And then for your second crossbar, you can take a measurement from one to the other to make sure that your crossbar spread is exactly where you want it to be. That's important to know for whatever accessory you plan on attaching and just making sure the bars run parallel to one another. But when you're done, you can take your included tool and tighten it down using that outermost screw. Now as you're tightening this, it might feel like it's not going to click and it takes a lot longer than you think it should, but it's just because the band underneath is a bit stretchy and it has that metal core. So keep turning until you hear the click and you can pop your caps back on once all sides have been tightened, And at the end, I always like to give a good shake test to make sure that nothing I installed feels loose. And particularly on that band here, that there's no front to back movement and that it's tight enough. But once I've done that, we're done. The installation process here is really straightforward, and you're left with a pretty solid roof rack system that utilizes those raised rails on your 2023 Volkswagen Tiguan. Thanks for watching.
Customer Reviews
Yakima LockNLoad Platform Rack for Raised Rails - TimberLine Towers - Aluminum - Y59PB
Average Customer Rating: 4.7 out of 5 stars (25 Customer Reviews)
Designed for use in the Australian Outback, this rugged platform lets you bring whatever gear you might need for your next adventure. Compatible with many Yakima off-road and traditional roof rack accessories.by: Phi06/29/2020
2018 Ford F-150
Mounted to the top of my 2018 F-150 Super Crew Cab. Had Yakima Baselines, with HD Bars, HD Bar Adapters and the locknload crossbar adapters. Wished I was able to install it without crossbars as it requires that I buy them, also adds a bit of height to the the locknload as well.
Very well built, had my wife (125lbs) walking around on it after I mounted the locknload. Took about an hour to assemble the locknload and maybe another hour or two of adjusting the bars to where I wanted the locknload to sit on the roof. Other than it looks a bit too high I do love them. Will probably see what I can do about lowering the locknload in the future.
by: Hurtlocker08/11/2023
Really Easy to Install! Solid and Strong amount to Roof Rack.
by: Paul 07/15/2023
An Excellent Roof Rack!
by: Steven 10/16/2023
Great product. Great service.
by: Michael09/04/2021
2008 GMC Yukon XL
I am going to include the Landing Pads, Skyline Towers, LockNLoad adapters, and Pivoting Mounts that are all required for my vehicle in this review of the 84" x 54" LockNLoad Platform. First, I had done months of research trying to figure out what would work and meet my needs for a 2008 GMC Yukon XL. Without the help of etrailer's agent, Ashley, I'd probably still be trying to figure things out! Ashley was patient and thorough, she made sure I had all the parts I needed for a fairly complex (and large!)project. I cannot thank her enough!
On to the assembly and installation: Ashley confirmed that following instructions was key to efficient building - I found that combining online instructions with the included hard copies worked best. As an example, the online fastener images and descriptions are far better than the paper ones. Then, having the paper instructions in hand made "in the moment" progress much faster. All of the Yakima parts fit together perfectly, and by methodically following the instructions (I cannot stress this enough!), including pre assembling Landing Pads, Towers, and Pivoting Mounts, there was no need to backtrack. Once I had a day to devote to the project, everything went very smoothly. Placing the large Platform on the mounts does require two people, but the rest was easy for one fairly handy person to accomplish. Making adjustments to be sure the Platform is centered and square to the roof took some time but it's worth it in the end. Again, thanks to etrailer and particularly Ashley! It was a pleasure doing business with you!
by: Eric 10/19/2023
Worked great
by: Jon12/16/2022
Lots of wind noise. Good rack overall
by: Diane 07/28/2023
SIMPLE & EASY!
by: Michael09/04/2021
Toyota4Runner
This thing added a great deal of flexibility to my 4Runner. Rock solid and almost limitless options for roof storage allowed me to customize it to transport a kayak and roof box that would never have been possible otherwise.
by: Dylan 05/20/2023
It was exactly what I ordered
by: SueCanoe02/10/2023
They do the job. I can't say that they look like they were custom-made for my new vehicle, but I trust them to stay on and keep my boat on the car. They hold securely.
by: Fran 05/23/2024
by: Robert 11/30/2023
by: Jay 07/31/2023
by: Robert 07/03/2023
by: Robert 08/24/2023
by: Robert 11/19/2023
by: Robert 11/04/2023
by: Laurence 06/17/2023
by: Ryan 04/05/2024
by: Joao07/18/2023
by: Joshua07/10/2021
by: J04/12/2024
by: Edwin08/22/2021
by: Marvin09/14/2023
25
52
Show More Reviews
See what our Experts say about this Yakima Roof Rack
- What is the Recommended LockNLoack Platform for My 2022 Subaru Outback Wilderness?For your 2022 Subaru Outback Wilderness, Yakima recommends the Yakima LockNLoad Platform Roof Tray - Aluminum - 60" Long x 54" Wide # Y05045. Since your vehicle has raised factory rails, you will need to purchase the TimberLine Towers # Y33TR along with the LockNLoad SL Adapter for Yakima SkyLine and TimberLine Towers # Y05042-2 to attach directly to the rails.
view full answer... - Correct Yakima LockNLoad Platform Roof Tray for a 2012 Toyota 4RunnerIn order to use the Yakima LockNLoad Platform Roof Tray part # Y05045 which is the recommended size on a 2012 Toyota 4Runner you will need the LockNLoad SL Adapter for Yakima SkyLine and TimberLine Towers part # Y05042-2 and the TimberLine Towers for Yakima Crossbars part # Y33TR.
view full answer... - Can You Use a Larger Yakima LockNLoad Platform Roof Tray on a 2023 Ford Expedition Than the 60"x54"You are correct that the 2023 Ford Expedition Platform Roof Rack by Yakima will fit the raised side rails on your Expedition. The 2023 Ford Expedition Platform Roof Rack by Yakima consist of: - Yakima LockNLoad Platform Roof Tray # Y05045 - TimberLine Towers for Yakima Crossbars # Y33TR - LockNLoad SL Adapter for Yakima # Y05042-2 I have an alternate option, but you would not be able to use the Yakima LockNLoad Platform Roof Tray # Y05048 (84" Long x 54" Wide) on your 2023 Ford Expedition....
view full answer... - Does Yakima LockNLoad Platform Fit Rhino-Rack Vortex Aero CrossbarsThanks for the photo, and yes, the LockNLoad will indeed fit to Rhino-Rack Vortex aero crossbars like your Rhino-Rack Vortex Crossbars for Retrax XR # RRVA180B-RRRLT600. You'll just need adapters to mount the platform, and here are the part numbers: - Yakima LockNLoad Platform Roof Tray # Y05045 - Crossbar Clamps for Yakima LockNLoad Platform Rack # Y05039 I also wanted to note that the clamps come in a 2-pack, and you will need a total of 4 clamps, so order two of the # Y05039.
view full answer...
- What Roof Basket will Attach Directly to My Raised Rails on My 2022 Toyota 4Runner?I have a great option for you if you do not like the height of the Yakima LockNLoad # Y05045 with the Timberline Towers # Y33TR on your raised factory side rails on your 2022 Toyota 4Runner. Unfortunately, I confirmed with Yakima that you will need to have the Timberline Towers in order to attach the LockNLoad to your rails. They cannot be mounted without those towers directly to your rails. In order to complete this setup, you also need 2 sets of the LockNLoad SL Adapter for Yakima SkyLine...
view full answer... - Platform Roof Rack that Fits 2022 Ford Bronco with Raised RailsWhile Rhino Rack doesn't have a Pioneer Platform Yakima has a very similar option with their LocknLoad Platform that is a fit for your 2022 Ford Bronco. For that you'd need the Timberline feet part # Y00147, LockNLoad platform # Y05045, and SL adapter # Y05042 (quantity 2). This will give you a 60 inch by 54 inch platform that is very similar to the Pioneer Platform.
view full answer... - Platform Rack Recommendation to Fit with Raised Rails on a 2021 Subaru AscentAs of right now I do not have any information as to if the Rhino Rack Platform will be compatible with your 2021 Subaru Ascent. If you want to get a platform on your 2021 Subaru Ascent, you can use the Yakima LockNLoad # Y05045 and use these adapters # Y05042-2 and these towers # Y33TR. The towers just wrap around your current side rails. This would only add about 4 inches to the top of your roof and it's your only roof tray option.
view full answer... - Low Profile Roof Platform Recommendation for 2020 Toyota 4Runner with Factory Side RailsFor your 2020 Toyota 4Runner with the factory side rails, I recommend the Yakima LockNLoad Platform Roof Tray 60" Long x 54" Wide, part # Y05045. It's pretty low profile at only 4 inches tall, and it will not interfere with your sunroof, since it will sit right behind it. I've attached a couple of photos so you can see for yourself. To attach the platform, you'll need the LockNLoad SL Adapters # Y05042-2 (qty 4), and TimberLine Towers # Y33TR (qty 4). This will add approximately another...
view full answer...
- What Roof-Mounted Platform do You Recommend for My 2022 Toyota 4Runner?I have a great platform solution for you. Unfortunately, I confirmed with Yakima that they have not confirmed a fit of the LockNLoad Platform # Y05045 on your factory crossbars on your 2022 Toyota 4Runner. With that being said, Yakima also has not tested the fitment of the LockNLoad to your rails if you remove the crossbars from the setup. This is because manufacturers often do not test these applications because their reasoning is you will always use your factory crossbars with any application....
view full answer... - Largest Yakima LockNLoad Platform That Fits 2 Roof Rack CrossbarsI checked with Yakima and the largest LockNLoad Platform Tray that will work with a roof rack system with two crossbars is the 60" Long x 54" Wide Yakima LockNLoad Platform Roof Tray # Y05045. To mount this tray to your BMW you will need the Crossbar Clamps for Yakima LockNLoad Platform # Y05039. The 84" Long x 49" Wide LockNLoad Platform # Y05047 does require at least three crossbars to mount. Using less than that would make it unstable, and not only void the warranty, but potentially...
view full answer...
- Rhino-Rack Pioneer Platform Rack for 2019 Ford Expedition with Factory Rails and No CrossbarsI actually had the chance to work with a 2019 Ford Expedition. While in the shop, I tested the RhinoRack roof racks we had shown to be compatible with the factory installed rails and to my surprise, the SX Series Legs # RRSX100 were not a fit. When trying to install them, I could tell they were not tall enough to catch on the rather large and triangular shape of the Expedition rails. The only style of legs or towers that will work is the kind that wraps around the entire bar, like the...
view full answer...
- Roof Platform Tray that Fits 2015 Chevy TahoeI have a way to install a roof platform tray similar to a Rhino Rack Pioneer Platform but Rhino Rack does not have a fit for your 2015 Chevy Tahoe. Instead you'd need to go with a Yakima LockNLoad with the part # Y05045, # Y53TR, # Y05042-2, # Y00243 which gives you a 60 inch by 54 inch platform confirmed as a fit.
view full answer... - Roof Basket That Mounts to Factory Raised Side Raids of 2019 Jeep RenegadeThere is one! It is called the Surco Safari Rack 5.0 for Raised Factory Rails # SPS5060-1101. It's size 60" x 50" which is the size Surco recommended for your 2019 Jeep Renegade. This system is a complete basket with sides and comes with adapters that clamp straight to your factory roof rails. I attached a video below with our review and explanation of the basket. It is similar to the very popular Yakima LockNLoad Platform Rack # Y05045. The LockNLoad platform though still needs separate...
view full answer... - Is The Rhino Rack Stow It Utility Holder Compatible With Yakima Trays and Crossbars? Yes, the Stow It Utility Holder # RR95AB can be mounted in the t-slots on the Yakima LockNLoad Platform Roof Tray # Y05045. It will also work on the Yakima HD Crossbars # Y01158 as both systems are using the t-track mounting system.
view full answer... - Platform Tray that Fits Roof of 2018 Chevy TahoeFor your 2018 Chevy Tahoe we have the Yakima platform tray kit part # Y05045, # Y00148, # Y05042-2, and # Y00243 as a confirmed fit.
view full answer... - Platform Rack for 2021 Honda Pilot With Flush-Mounted RailsThere is one option for a platform rack that will fit your 2021 Honda Pilot with flush-mounted rails, and give you the off-road look and capability you want. And it will not interfere with your sunroof either, so long as the sunroof retracts into your roof as opposed to jutting upwards. The rack that fits your '21 Pilot is from Yakima and is made up of the following: - Yakima LockNLoad Platform Roof Tray # Y05045 - SkyLine Towers # Y53TR - LockNLoad SL Adapter # Y05042-2 - Landing Pad...
view full answer... - Will The Rhino-Rack Cable Core Lockdown Fit A Yakima LockNLoad Platform? Yes, the Rhino-Rack Cable Core Lockdown # RR43207 will also work with your Yakima LockNLoad Platform Roof Tray # Y05045.
view full answer... - How to Mount a Platform Rack to the Roof of a 2019 Mercedes-Benz Sprinter 2500There is a possible solution for you, but there aren't any Yakima or Rhino-Rack platform racks that can fit your 2019 Mercedes-Benz Sprinter 2500 without having a crossbar system. For your crossbars, I recommend the Rhino-Rack Vortex Aero Crossbars, part # RRVA180B-2. They are aero-style crossbars that are better at reducing wind noise and drag than other styles. I've linked to a video review of these crossbars below. To mount these crossbars, you will need the Quick Mount Legs, part...
view full answer... - Does Yakima Frontloader Bike Rack Y02103 Fit The Yakima LockNLoad Platform Tray Y05045?The Yakima FrontLoader Wheel Mount Bike Carrier - Roof Mount # Y02103 you currently have is indeed compatible with the Yakima LockNLoad Platform Roof Tray - Aluminum - 60" Long x 54" Wide # Y05045 you were looking at without the need for any adapters. I included videos of the products mentioned for you to take a look at.
view full answer... - Can Yakima LockNLoad Platform Roof Tray Y05045 Be Installed On 2017 Toyota Tacoma W/ OEM Roof RackWhen the OEM roof rack on your 2017 Toyota Tacoma is in the stowed position the crossbars are removed and put inline with the rails on the side, so when in this position the Yakima LockNLoad Platform Roof Tray - Aluminum - 60" Long x 54" Wide # Y05045 or any other roof mounted accessories cannot be used. With that said you would still have the same 100lb load limit. Instead the crossbars will need to be opened up for the # Y05045 to be installed, and you will need to use the Crossbar Clamps...
view full answer... - Will Yakima RoadShower Work With Yakima LockNLoadYes, the Yakima RoadShower Portable Solar Shower part # Y29VR will work with the Yakima LockNLoad Platform Roof Trays like part # Y05045. I confirmed this with Yakima as well. There are no extra parts needed.
view full answer... - Will Platform Rack Fit Raised Side Rails of 2017 Toyota Land CruiserThe Yakima LockNLoad Platform Roof Tray # Y05045 is actually designed to do exactly what you are wanting, which is mount directly to the raised side rails of your 2017 Toyota Land Cruiser without crossbars. To do so you'll also need the TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails # Y33TR and LockNLoad SL Adapter for Yakima SkyLine and TimberLine Towers # Y05042-2.
view full answer... - Which Roof Bike Racks are Compatible with Yakima LockNLoad Platform Roof TrayI have several bike rack options that are compatible with the Yakima LockNLoad Platform Roof Tray # Y05045, but the HighRoad # Y02114 isn't one of them. Below is a list of compatible roof bike carriers for the LockNLoad: Yakima HighSpeed # Y02115 (can attach with included rubber coated steel straps, or with optional SmarT-slot kit # Y02122 sold separately) Yakima FrontLoader # Y02103 Yakima ForkLift # Y02098 Yakima WheelHouse # Y02108 The FrontLoader # Y02103 is going to be your best...
view full answer...
- Can Yakima LockNLoad Platform For 2017 Toyota Highlander XLE be Used with Roof TentThe Yakima LockNLoad Platform part # Y05045, # Y53TR, # Y05042-2, and # Y00242 would work great for your tent setup. This will give you a 165 lb dynamic weight capacity which is the standard capacity needed for tents which would use a static capacity instead and would be much higher. This is a creative solution to give you the additional spread you'd need for your tent too!
view full answer... - Recommended 2024 Kia Carnival Roof Rack for Raised RailsWe have a roof rack system for raised rails on your 2024 Kia Carnival from Yakima: - 60" JetStream Crossbars # Y00426 - TimberLine Towers # Y33TR - Lock Core Kit # Y07204 If you're asking for raised rails to install on your Carnival we unfortunately don't have those, but you should be able to get them from a Kia dealer.
view full answer... - Recommended Roof Rack for 2020 Subaru Forester With Raised Rails for Rooftop TentThe roof rack I highly recommend for your 2020 Subaru Forester with raised rails that will allow you to carry any cargo and use your Yakima SkyRise HD Tent # Y07437 is a rack from Yakima, which consists of: - Yakima JetStream Crossbars # Y00425 (Black) - TimberLine Towers for Yakima Crossbars # Y33TR The accompanying photo shows this rack on a Subaru Forester so you can see how it will look when on yours. It has the needed capacity for your tent, and the bars are aerodynamic so you can...
view full answer...
- How To Carry 5 Bikes On a 2017 Volkswagen Golf GTIYou are definitely on the right track to carrying 5 bikes on your 2017 Volkswagen Golf GTI. I recommend to use the EcoHitch Hidden Trailer Hitch Receiver part # 306-X7309 which is a concealed 2" hitch for the Golf GTI. You can then use any 2" hitch compatible bike rack that you'd like but you will need to stay under 300 lbs which is factoring the weight of the rack itself and the bikes. I recommend to carry 3 bikes on the hitch and 2 bikes on the roof. For the rack, I recommend the SportRack...
view full answer... - How to Carry Bikes on a 2018 Toyota Tacoma with Access Tonneau CoverThe only option that you have to carry bikes on your 2018 Toyota Tacoma with an Access tonneau cover installed like the Access Original Roll-Up Tonneau Cover part # A15269 would be to install a roof rack and place them on the rack with the respective carrier or to install a trailer hitch if you don't already have one and place them on the hitch with the respective carrier. They do not make anything that will sit atop the bed rails and not require drilling when you have a tonneau cover installed,...
view full answer... - Can Thule Hullavator Fit Roof Rack of 2019 Ford ExpeditionI checked with Thule and their Hullavator part # TH898 could fit your 2019 Expedition but you'd need to install a roof rack that has bars that extend past the feet, the Yakima # Y00426 and # Y33TR.
view full answer... - How to Carry Bikes on a 2018 Volkswagen Golf Alltrack with a SunroofUsing the JetStream Crossbars # Y00425 along with the TimberLine Towers # Y33TR will be taller than using the Yakima RailBar Crossbars # Y00432-0433 for your 2018 Volkswagen Golf Alltrack but you do need to note that every roof rack manufacturer states that a sun or moon roof should not be used with a roof rack installed. Roof racks do have some wind noise which the aero style bars, although cause less noise, are not immune from. There is also the issue of clearance as well as possible...
view full answer... - Recommended Roof Rack For a 2023 Ford Bronco 4-Door With Raised Roof RailsI recommend using the Yakima JetStream Crossbars # Y00426 with their Towers # Y33TR on your 4-door 2023 Ford Bronco. This rack uses aero crossbars which feature an integrated t-track for adding accessories. The Yakima Same Key System (SKS) Lock Cores # Y07208 will provide you with 8 lock cores which you can use on the towers and other Yakima compatible roof accessories. These will allow you to secure the rack and your gear to the roof rack.
view full answer... - Lockable Yakima Roof Rack Recommendation for 2001 Honda CR-V with Raised Roof RailsFor your 2001 Honda CR-V that has raised roof rails that run from front to back the Yakima parts you would need to complete a roof rack would be the part numbers # Y00408, # Y03536, and # Y33TR. For a lock kit for the rack you then would want the part # Y07204.
view full answer... - Minimum Crossbar Length for Yakima Roof Rack on 2019 Honda RidgelineAccording to Yakima, the shortest crossbars that will work on your Ridgeline is their 'medium' crossbar which is the 60 inch long # Y00426. If you go any shorter than that, the bar won't be long enough to properly connect to the roof rack feet. To provide a rack, if you have the bare roof you'd need the following: 60 Inch Crossbars, part # Y00426 BaseLine Towers, part # Y28TR Vehicle Specific BaseClips, part # Y06152 If your Ridgeline has the side rails on the roof, you'd use the same...
view full answer... - What is the Recommended LockNLoack Platform for My 2022 Subaru Outback Wilderness?For your 2022 Subaru Outback Wilderness, Yakima recommends the Yakima LockNLoad Platform Roof Tray - Aluminum - 60" Long x 54" Wide # Y05045. Since your vehicle has raised factory rails, you will need to purchase the TimberLine Towers # Y33TR along with the LockNLoad SL Adapter for Yakima SkyLine and TimberLine Towers # Y05042-2 to attach directly to the rails.
view full answer... - Recommended Roof Rack for Carrying a Bike on a 2019 Ford ExpeditionI recommend going with the Yakima JetStream roof rack system for your 2019 Ford Expedition because the JetStream bars are more versatile than other crossbars and they don't require any modification to the rubber strip when using accessories. The parts that you need to install this system on your 2019 Expedition are the 60" JetStream Bars # Y00426 , and the TimberLine Towers # Y33TR. These easily install on the OEM raised rails of your Expedition and can be locked for security with the...
view full answer... - Can 60" Thule Crossbars Be Mounted To A 2021 Subaru Crosstrek Unfortunately the spacing for your vehicle wouldn't allow for you to connect 60" Thule crossbars, but I do have two options for you. The first being that you still use your Thule feet and instead of using crossbars you use the Thule Caprock Platform Roof Tray # TH58YE. This would give you more mounting locations to accommodate all of your cargo needs. The other option would be to switch to a Yakima roof rack, with the Yakima JetStream Crossbars # Y00426 and TimberLine Towers # Y33TR....
view full answer... - Recommended Roof Rack for a 4-Door 2023 Ford Bronco w/ Side RailsTo add a roof rack to your 4-door 2023 Ford Bronco, I recommend the roof rack by Yakima and it includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 item # Y00426 TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails - Qty 4 item # Y33TR This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same Key System item # Y07204 to prevent theft. Since you're a fan of Yakima's products you can also buy larger...
view full answer... - Correct Yakima LockNLoad Platform Roof Tray for a 2012 Toyota 4RunnerIn order to use the Yakima LockNLoad Platform Roof Tray part # Y05045 which is the recommended size on a 2012 Toyota 4Runner you will need the LockNLoad SL Adapter for Yakima SkyLine and TimberLine Towers part # Y05042-2 and the TimberLine Towers for Yakima Crossbars part # Y33TR.
view full answer... - How to Carry Bikes with a 2022 Volkswagen TaosI do have a solution for you to carry some bikes with your 2022 Volkswagen Taos, but as of right now (October 2021) we currently don't have any trailer hitches that fit the AWD model of your vehicle. The alternative solutions include using a trunk mount bike rack or a roof rack. For a trunk mount bike rack I recommend the Yakima FullBack which comes in 2-Bike # Y02634 and 3-Bike # Y02633 versions. For a roof rack you'll want the TimberLine Towers # Y33TR and 50" JetStream Crossbars #...
view full answer... - Roof Rack Needed to Carry a Roof Top Tent with a 2018 Subaru CrosstrekIt really depends on what roof top tent you are looking at. If you are looking into the Yakima SkyRise HD Tent # Y07436 then you will need to have raised rails and use the roof rack that consists of the Jetstream Bars # Y00426 , along with the TimberLine Towers # Y33TR. If you would like to add lock cores to your roof rack you can use part # Y07204. I have attached a clip from the product page where you can see some of the stipulations about fit. The roof rack must be rated for 165 lbs...
view full answer...
- Recommended Cargo Box and Roof Rack for a 2003 Nissan XterraIf your 2003 Nissan Xterra has a factory rack that includes cross bars then the Thule Motion XT Cargo Box, item # TH629706, will work great on the roof of your vehicle. If your vehicle does not have factory cross bars you will need to install them. The Yakima Roof Rack for 2003 Nissan Xterra, item # Y00408, # Y03536, and # Y33TR would complete the roof rack for attachment of either of the above mentioned cargo boxes. You may want to consider the Tire Wheel Step item # PT68ZR, which is...
view full answer... - Will the Yakima FrontLoader Wheel Mount Bike Carrier # Y02103 Fit on a 2010 Toyota FJ CruiserI checked fits with both Yakima and Thule and there is not a bike rack that attaches directly to the factory cross bars on your FJ Cruiser at this time. You could use the Yakima Roof Rack, parts # Y00409, # Y03536 and # Y33TR to install the FrontLoader bike carrier on the roof of your vehicle.
view full answer... - Thule Roof Cargo Boxes That Fit a 2014 Subaru Forester with OEM Roof RackAll of the Thule roof cargo boxes that we carry will essentially fit your 2014 Subaru Forester with the OEM roof rack. If you check out the attached installation video of the Thule Pulse Alpine # TH613 you can see that it still clears the rear hatch on a 2015 Forester, which has the same dimensions as your 2014 Forester. Since this cargo box requires the most clearance it means that anything smaller will fit. I confirmed this with Thule as well. I recommend going with the Force XT that...
view full answer...
- Recommended Crossbars for a Factory Rack on a 2013 Mitsubishi OutlanderWe carry roof rack systems that will mount to the factory side rails on your 2013 Mitsubishi Outlander. If you have the factory rails that run front to back, then I recommend the Yakima Roof Rack, # Y00425 JetStream Crossbars and # Y33TR TimberLine Towers, for your Outlander. The Yakima JetStream bars are constructed of aluminum and aerodynamic shape will less wind drag and noise. TimberLine Towers will allow to mount the rack to your front to back roof bars on your vehicle. If your...
view full answer... - Can You Use a Larger Yakima LockNLoad Platform Roof Tray on a 2023 Ford Expedition Than the 60"x54"You are correct that the 2023 Ford Expedition Platform Roof Rack by Yakima will fit the raised side rails on your Expedition. The 2023 Ford Expedition Platform Roof Rack by Yakima consist of: - Yakima LockNLoad Platform Roof Tray # Y05045 - TimberLine Towers for Yakima Crossbars # Y33TR - LockNLoad SL Adapter for Yakima # Y05042-2 I have an alternate option, but you would not be able to use the Yakima LockNLoad Platform Roof Tray # Y05048 (84" Long x 54" Wide) on your 2023 Ford Expedition....
view full answer... - Parts Needed to Carry a 16' Canoe in a 2017 Toyota Tacoma Short Bed w/ Deck Rail SystemThe best option is going to be a combination of both a roof rack and a ladder rack. You can use the Rola Haul-Your-Might T3 Truck Bed Ladder Rack # 59799. This ladder rack is designed to be used with the rail system in your 2017 Toyota Tacoma and will provide you with crossbars that are similar to roof rack crossbars. Because of the length of your canoe, you will also want a roof rack so the canoe can be placed over the cab and truck bed to keep it secure and from sticking past the truck...
view full answer... - Are Yakima TimberLine Towers Compatible With Thule Wingbar Evo Crossbars?No, you cannot use Yakima Timberline Towers # Y33TR with Thule crossbars; you must use the same brand for the roof rack system as different brands are not made to be compatible with each other. The only parts that may be compatible among several brands are the industry standard T-slot channels on top, and the standard roof tracks for camper shells or naked roof. In order to install the Thule Wingbar 50" crossbars # TH711300 that you already have, you'll need Feet # TH710601 and custom...
view full answer... - Recommended Roof Rack for 2019 Volkswagen Golf 5-Door with Raised RailsI do have a great roof rack option for the 2019 Volkswagen Golf 5-Door with raised side rails however the Whispbar Brand is no longer in production with Yakima. I recommend the Yakima JetStream Crossbars part # Y00425 with the TimberLine Towers part # Y33TR on the 2019 Volkswagen Golf. The JetStream bars are low profile aerodynamic bars much like the Whispbars. The biggest difference is the bar sits atop of the foot instead of through it which makes the rack more versatile when it comes...
view full answer...
- What is the Recommended LockNLoack Platform for My 2022 Subaru Outback Wilderness?For your 2022 Subaru Outback Wilderness, Yakima recommends the Yakima LockNLoad Platform Roof Tray - Aluminum - 60" Long x 54" Wide # Y05045. Since your vehicle has raised factory rails, you will need to purchase the TimberLine Towers # Y33TR along with the LockNLoad SL Adapter for Yakima SkyLine and TimberLine Towers # Y05042-2 to attach directly to the rails.
view full answer... - Correct Yakima LockNLoad Platform Roof Tray for a 2012 Toyota 4RunnerIn order to use the Yakima LockNLoad Platform Roof Tray part # Y05045 which is the recommended size on a 2012 Toyota 4Runner you will need the LockNLoad SL Adapter for Yakima SkyLine and TimberLine Towers part # Y05042-2 and the TimberLine Towers for Yakima Crossbars part # Y33TR.
view full answer... - Can You Use a Larger Yakima LockNLoad Platform Roof Tray on a 2023 Ford Expedition Than the 60"x54"You are correct that the 2023 Ford Expedition Platform Roof Rack by Yakima will fit the raised side rails on your Expedition. The 2023 Ford Expedition Platform Roof Rack by Yakima consist of: - Yakima LockNLoad Platform Roof Tray # Y05045 - TimberLine Towers for Yakima Crossbars # Y33TR - LockNLoad SL Adapter for Yakima # Y05042-2 I have an alternate option, but you would not be able to use the Yakima LockNLoad Platform Roof Tray # Y05048 (84" Long x 54" Wide) on your 2023 Ford Expedition....
view full answer... - Platform Tray/Roof Rack that Fits 2018 Jeep Grand Cherokee TrailhawkFor your 2018 Jeep Grand Cherokee we don't have a Rhino Rack Pioneer platform that fits your roof rails directly but we have the very similar Yakima LockNLoad Platform Tray setup part numbers # Y05044, # Y53TR, # Y05042-2, and # Y00244 which does fit your rail setup directly. This tray is 55 inch by 49 inch. We can't recommend opening your roof with this installed though as it might interfere but also it's going to cause quite a bit of wind noise.
view full answer... - What Roof Basket will Attach Directly to My Raised Rails on My 2022 Toyota 4Runner?I have a great option for you if you do not like the height of the Yakima LockNLoad # Y05045 with the Timberline Towers # Y33TR on your raised factory side rails on your 2022 Toyota 4Runner. Unfortunately, I confirmed with Yakima that you will need to have the Timberline Towers in order to attach the LockNLoad to your rails. They cannot be mounted without those towers directly to your rails. In order to complete this setup, you also need 2 sets of the LockNLoad SL Adapter for Yakima SkyLine...
view full answer... - Platform Rack Recommendation to Fit with Raised Rails on a 2021 Subaru AscentAs of right now I do not have any information as to if the Rhino Rack Platform will be compatible with your 2021 Subaru Ascent. If you want to get a platform on your 2021 Subaru Ascent, you can use the Yakima LockNLoad # Y05045 and use these adapters # Y05042-2 and these towers # Y33TR. The towers just wrap around your current side rails. This would only add about 4 inches to the top of your roof and it's your only roof tray option.
view full answer... - Roof Platform Rack Options for a 2014 Jeep Grand CherokeeWe have a few different options for adding a platform rack to your 2014 Jeep Grand Cherokee and it all depends on how you'd like to install it. If you'd like to install the platform rack directly to the flush rails (you'll need to remove your OEM crossbars) then we have the following: Yakima LockNLoad - Parts # Y05044, # Y53TR, # Y05042-2, and # Y00244 Rhino-Rack Pioneer - # RR74AB If you'd like to install a platform rack to your OEM crossbar system then we have the following: Yakima...
view full answer... - Low Profile Roof Platform Recommendation for 2020 Toyota 4Runner with Factory Side RailsFor your 2020 Toyota 4Runner with the factory side rails, I recommend the Yakima LockNLoad Platform Roof Tray 60" Long x 54" Wide, part # Y05045. It's pretty low profile at only 4 inches tall, and it will not interfere with your sunroof, since it will sit right behind it. I've attached a couple of photos so you can see for yourself. To attach the platform, you'll need the LockNLoad SL Adapters # Y05042-2 (qty 4), and TimberLine Towers # Y33TR (qty 4). This will add approximately another...
view full answer... - Can I Size Down From A LockNLoad Platform B To A LockNLoad Platform KYou should be able to use the Yakima LockNLoad Platform Roof Tray - Aluminum - 55" Long x 49" Wide, part # Y05044, on your vehicle. If your crossbars are at least 27" apart and less than 33" apart, you should not have any problems mounting the platform to your vehicle. Do keep in mind that you will need an adapter to mount this platform directly to your towers. The LockNLoad SL Adapter for Yakima SkyLine and TimberLine Towers - Qty 4, part # Y05042-2, will attach directly to your Yakima...
view full answer...
- Rhino-Rack Pioneer Platform Rack for 2019 Ford Expedition with Factory Rails and No CrossbarsI actually had the chance to work with a 2019 Ford Expedition. While in the shop, I tested the RhinoRack roof racks we had shown to be compatible with the factory installed rails and to my surprise, the SX Series Legs # RRSX100 were not a fit. When trying to install them, I could tell they were not tall enough to catch on the rather large and triangular shape of the Expedition rails. The only style of legs or towers that will work is the kind that wraps around the entire bar, like the...
view full answer... - Roof Platform Tray that Fits 2015 Chevy TahoeI have a way to install a roof platform tray similar to a Rhino Rack Pioneer Platform but Rhino Rack does not have a fit for your 2015 Chevy Tahoe. Instead you'd need to go with a Yakima LockNLoad with the part # Y05045, # Y53TR, # Y05042-2, # Y00243 which gives you a 60 inch by 54 inch platform confirmed as a fit.
view full answer... - Carrying A Yakima LockNLoad Platform On 2007 Chevy SuburbanThe Yakima LockNLoad Platform Roof Tray - Aluminum - 84" Long x 54" Wide, part # Y05048, needs a roof rack in order to attach to your 2007 Chevy Suburban. Your vehicle's roof either has raised rails or fixed points, so it has two separate roof rack fits. Each option has a maximum weight limit of 165lbs. Please keep this in mind because the weight of the rack and the accessories are part of the maximum weight limit and the LockNLoad Platform weighs 70lbs and the roof rack will weigh approximately...
view full answer... - Platform Tray that Fits Roof of 2018 Chevy TahoeFor your 2018 Chevy Tahoe we have the Yakima platform tray kit part # Y05045, # Y00148, # Y05042-2, and # Y00243 as a confirmed fit.
view full answer... - Will Rhino-Rack Pioneer Platform Rack Work On a 2020 Subaru OutbackI do have an option for you but the Rhino-Rack Pioneer Platform Rack cannot be used on a 2020 Subaru Outback per Rhino Rack. That said, we do have a very similar option for you in the Yakima LockNLoad Platform Rack part # Y05044-39. That said, this will need to be mounted using the below items as it won't fit the factory crossbars. The Rhino-Rack Pioneer and Yakima LockNLoad are both very similar. SkyLine Towers for Yakima Crossbars part # Y53TR Landing Pad 27 for Yakima SkyLine And Control...
view full answer... - Platform Rack for 2021 Honda Pilot With Flush-Mounted RailsThere is one option for a platform rack that will fit your 2021 Honda Pilot with flush-mounted rails, and give you the off-road look and capability you want. And it will not interfere with your sunroof either, so long as the sunroof retracts into your roof as opposed to jutting upwards. The rack that fits your '21 Pilot is from Yakima and is made up of the following: - Yakima LockNLoad Platform Roof Tray # Y05045 - SkyLine Towers # Y53TR - LockNLoad SL Adapter # Y05042-2 - Landing Pad...
view full answer... - 2021 Jeep Grand Cherokee Trailhawk Platform Style Roof RackThere may be slight differences between the 2020 and 2021 Grand Cherokee, but not much. If you're wanting to get a platform on your 2021 Jeep Grand Cherokee I do have one that is confirmed to fit. All You need is to get the Yakima LockNLoad Platform # Y05044, SkyLine Towers # Y53TR, SL Adapter # Y05042-2 and these Landing Pad 18 # Y00244. This is just like the rhino rack platform. It will install similar to the rack that I put on this 2019 Cherokee so check that out!
view full answer... - Will Platform Rack Fit Raised Side Rails of 2017 Toyota Land CruiserThe Yakima LockNLoad Platform Roof Tray # Y05045 is actually designed to do exactly what you are wanting, which is mount directly to the raised side rails of your 2017 Toyota Land Cruiser without crossbars. To do so you'll also need the TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails # Y33TR and LockNLoad SL Adapter for Yakima SkyLine and TimberLine Towers # Y05042-2.
view full answer... - Correct Yakima LockNLoad Platform Roof Tray For a 2016 Honda CR-V with Flush Side RailsIn order to use the Yakima LockNLoad Platform Roof Tray on a 2016 Honda CR-V with flush side rails you will need to use the following; part # Y05044, part # Y53TR, part # Y05042-2, and part # Y00245. This will be a direct mount option which mounts to factory fixed points . The tray also mounts directly to the mounting feet so there is no need for additional crossbars and adapters.
view full answer... - How Can I Attach A Yakima LockNLoad Platform To My 2022 Subaru Outback Wagon W/ Factory Roof RackYou will be able to carry a LockNLoad Platform on your 2022 Subaru Outback Wagon, but it will not fit on your factory cross bars. In order to carry this platform, you will need the following: SkyLine Towers for Yakima Crossbars, part # Y53TR, Landing Pad 27, part # Y46VR, Yakima LockNLoad Platform Rack for Crossbars, part # Y05044-39 LockNLoad SL Adapter, part # Y05042-2, and the Yakima Same Key System (SKS) Lock Cores (QTY 4), part # Y07204. This roof rack setup will allow you to...
view full answer... - Can Yakima LockNLoad Platform For 2017 Toyota Highlander XLE be Used with Roof TentThe Yakima LockNLoad Platform part # Y05045, # Y53TR, # Y05042-2, and # Y00242 would work great for your tent setup. This will give you a 165 lb dynamic weight capacity which is the standard capacity needed for tents which would use a static capacity instead and would be much higher. This is a creative solution to give you the additional spread you'd need for your tent too!
view full answer... - Will the Rhino-Rack Pioneer Platform # JB0892 Fit on My 2014 Jeep Grand Cherokee with Flush Rails?I have a solution for you. As far as mounting a Pioneer platform 72" x 56" and Backbone like the # JB0892 on your black and chrome raised rails of your 2014 Jeep Grand Cherokee, I confirmed with Rhino-Rack that they do not have an engineered fit of that size of platform for your roof. Also, we do not carry a Backbone that is guaranteed to fit your roof. Regrettably, your rails will not work with the RCL Legs for Rhino-Rack Crossbars and Pioneer Platforms # RRRCL6 either. With that being...
view full answer... - Yakima LockNLoad that Fits 2023 Toyota RAV4Yakima actually has a LockNLoad that fits your 2023 Toyota RAV4 with the part numbers # Y05044, # Y33TR, # Y05042-2 but the Yakima platform can't fit the Backbone system.
view full answer... - Is There a Platform Rack For a 2019 Ford Expedition That Mounts To Side RailsIf you want to use a platform rack and mount it directly to the side rails on a 2019 Ford Expedition (Includes Max) then I do have an option for this in the Yakima LockNLoad Platform Roof Tray Kit part # Y05045, part # Y05042-2, and part # Y33TR. The Yakima LockNLoad has integrated channels which allows you to use channel mounted accessories and it uses horizontal cross sections which allows you to use accessories that clamp on as well like a rooftop tent.
view full answer... - Lowest Profile Roof Tray that Fits 2023 Subaru Ascent with Raised RailsYakima has a platform tray that fits the raised side rails of your 2023 Subaru Ascent with the Yakima LockNLoad # Y05045,# Y33TR, # Y05042-2 which will by far be your lowest profile option since a set of crossbars isn't required and it's a platform and not a basket so it is not very tall at all. The tray is 60" Long x 54" Wide.
view full answer...
Do you have a question about this Roof Rack?
Info for this part was:
Edited by:
Daron K
Written by:
Alex H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.