Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide
Item # 13703
Retail:$642.95
Our Price: $391.21
You Save: $251.74
Confirmed to Fit
2022 Entegra Coach Vision Motorhome
26X
27A
29F
29S
31V
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
In-stock alternatives that can ship today
- All Info
- Reviews (354)
- Q & A (0)
- Photos
2022 Entegra Coach Vision Motorhome - Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide
- Frame Mount Hitch
- 22 - 72 Inch Wide Frame
- Bolt-On
- Weld-On
- 2 Inch Hitch
- CURT
Adjustable trailer receiver hitch designed for use on RVs can be bolted to the Entegra Coach Vision Motorhome frame or welded on for a no-drill application. Powder coated steel is sturdy and corrosion resistant.
Features:
- Universal hitch designed for use on RVs and motorhomes
- Heavy-duty side brackets allow for maximum adjustability
- Slide along hitch body to match the width of your vehicle frame
- Work on box frame, C-channel frame, or I-beam frame
- Let you position tube mounts toward the front or rear, putting the hitch body in the best location for clearance
- Hardware included
- High-gloss black powder coat finish resists rust, corrosion, and is resistant to scratches and UV damage
- Strong, secure all-frame attachment
- Solid construction for maximum strength and safety
- Not for use with a weight distribution system
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 3,500 lbs
- Maximum tongue weight: 350 lbs
- Frame width:
- Minimum: 22"
- Maximum: 72"
- Bracket thickness: 1/4"
- Distance from center of hitch pin hole to end of receiver tube: 2-1/2"
- Overall length of receiver tube including crossbar: 11"
- Distance from front of crossbar to front of receiver tube: 8-3/16"
- Limited lifetime warranty
Notes:
- All non-trailer loads (bike racks, cargo carriers, etc.) applied to this product must be supported by auxiliary stabilizing straps.
- For use with RV-approved accessories only.
- The main hitch body tube can be trimmed so the ends are flush with the frame brackets. After trimming, coat the bare metal with paint to protect against rust and corrosion.
- If welding this hitch, all welding surfaces must be cleaned to bare metal or the weld will not be the required strength and may void the warranty.
13703 Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide
Installation Details
Tech Tip
Product may be welded on for a no-drill application, or you may drill holes and use as bolt-on application
Customer Satisfaction Score:
88% were satisfied with this product
12% of customers were not satisfied
- Wrong item was ordered
- Arrived Damaged
- Product did not meet expectations
Customer Reviews
Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide - 13703
Average Customer Rating: 4.5 out of 5 stars (354 Customer Reviews)
Adjustable trailer receiver hitch designed for use on RVs can be bolted to the vehicle frame or welded on for a no-drill application. Powder coated steel is sturdy and corrosion resistant.by: Monty 04/21/2023
Perfect fit, very durable, solid heavy duty hitch.
I have had the hitch installed for over a year now and hitch has performed exactly like it should. No problems
by: Beatriz05/28/2024
Unfortunately they are not very useful for me. I have it mounted on my enclosed trailer and it’s way to low to the ground when I put weight in it.
by: Larry C.10/16/2017
I was very pleased with the ordering process, the very quick delivery date, and the installation process. Although I did have to relocate my stabilizer jacks about 4 inches, this was no real issue. The hitch fit like a glove and I was able to install it myself. It took me a little longer than most others because I'm 68 yrs old and also have Parkinson's Disease. So If I can install it, I figure most anyone can. I've included a picture.
Thanks etrailer for a great experience.
Larry C.
10/16/2018
Its been a year since I installed this hitch. Ive pulled my boat several times with no issues. Great hitch and also - NO RUST.
by: Terry07/05/2023
I installed your hitch to my32 foot 2023 Puma without a hitch. The instal went smoothly. In about 3 hours. The only modifications were the length of the bolts. I had to install onto a 2x4 inch tubing. Then welding it to the rv. Thank you for all your help.
by: Roy03/08/2024
When I got the hitch the shipping company had damaged the packaging and lost ona of the parts. I got in touch with etrailer and they had a new part to me in just a few days. I love the hitch and couldn’t ask for better service.
by: Richard 05/20/2024
MG
Fit perfectly on mg 2013 keystone alpine 5th wheel
by: Kenneth03/31/2023
2017 Keystone Alpine Fifth Wheel
When hitch arrived the parts bag was open and a few bolts, nuts,etc were missing. Called etrailer and a new parts bag was shipped quickly. Fairly easy install on our 5th wheel. In pictures we haven't put the underside cover back up yet.
by: Tony11/17/2021
It is a perfect use for a mountain bikes dirt bikes on the back of travel trailers. Be advised that the hitch will sit lower than normal and may have some clearance issues over uneven terrain. It’s a 3 inch lift is used on the axle or an axle flip os performed, There should not be a problem. Also be aware that most travel trailers only have about a 3 inch width on the beam which will not allow the use of all four holes on the side plate mounting holes on the hitch. Using both the two lower side holes and the bottom two holes still should make the hitch plenty secure
by: KEN06/06/2016
Harley Davidson
THIS IS POSSIBLY THE ONLY WAY TO PUT A HITCH ON A FIFTH WHEEL. IT FIT LIKE IT WAS MADE FOR IT. I USE IT TO TRAILER MY HARLEY AND IT WORKS GREAT. I AM NOT AFRAID OF IT FALLING OFF DOWN THE ROAD. GREAT HITCH!!!
by: Joe G01/15/2019
Install the hitch I purchased from you I had to raise the bumper inch and half to make it fit and works great thx for a great product no issues what so ever also the bolt fishing tool was awesome thx again.
Joe G.
1/16/2020
Awesome I pull a trailer with a side by side and had no problems at all.
by: Mark 02/01/2023
Hitch works great for pulling my boat behind my fifth wheel.
Mark
2/2/2024
Works well and looks great
by: Melissa11/09/2019
Great quality! It wouldn’t have taken so long if we didn’t have to move the jack stabilizers first. I am very impressed with the look and feel of the motorcycle carrier as well as the adjustable hitch. Fit perfectly. Love it. My son is stoked.
by: Michael 04/27/2024
Easy to install, does the job.
What I have come to expect from ETrailer
by: Neil 11/08/2023
The hitch was easy to install. The hardware did not make it with hitch so it had to be replaced. The only issue was that the bolts were to short to install the hitch to the rv frame. Had to go get them local.
Customer service was great.
I suggest finding a way to attach the hardware to th hitch so if the shipping box rips like mine did the hardware stays with the hitch.
I will use etrailer again when I need something
by: Gary Q06/16/2019
Item allows me to pull trailer behind camper.i can make one trip to the campground.
Gary Q.
6/17/2020
Works great,no problems .we take golf cart camping,now we make only one trip.
by: Gale11/08/2023
I ordered the 13703 hitch for my 2019 Rockwood Mini Lite. Just for your information this trailer has the black tank in the very back. I had to put the bracket on the outside of the frame to drill the holes. There is no room on the inside and also need to use a right angle drill. There is also a piece of angle iron that holds up the belly pan that has to be cut off. It was a pretty difficult installation but I did get it done. I'm not complaining just thought I would let you know so you can pass on to another customer.
by: Dean G.08/21/2017
Install went smoothly, had to relocate the manual scissor jacks that are used to level the RV. Receiver hitch was heavy duty with quality bolting hardware included.
by: Russ08/22/2022
2015 Heartland RV Bighorn Fifth Wheel
I received my order today, and from the look of the box I figured there was stuff missing. I was correct after looking in the box through its many holes The only thing in the box was the receiver bar, no plates to attach or other parts needed to install.
Russ
8/23/2023
The hitch has held up very well with one exception one of the bolts that holds the receiver bar from moving left to right sheered off so I have to install a new bolt before I use it gain.
by: TimH.08/21/2019
Overall I am satisfied with the receiver hitch. I faced a few challenges installing the hitch. Mostly to due with the location of the bolt holes and the width of the lock nuts. I had to trim the lock nuts to clear the available space. It was an exercise of trial and error. I use the hitch to tow my 2,300 lbs. 16' Deep-V fishing boat behind my 5th wheel. The receiver has performed perfectly.
by: Jon07/10/2022
Hitch showed up later than expected, box looks like it had been drug behind the ups truck, missing a few bolts nuts and square spacers which were lose in the box as the bag looks like mice had eaten it! Hopefully it’s a good product but I can’t install it without the missing pieces.
Jenny N.
7/14/2022
That is tough and I understand your disappointed in missing the hardware needed to install the hitch. I will have our customer service team reach out to assist.
by: Louis06/14/2020
Shipment was right on time and receiver hitch was high quality. I have 35' Sandpiper Fifth-wheel RV and was not able to bolt up right to the frame without removing the panel covering under the RV, so I elected to make an extension which is welded to the end of the frame. Receiver hitch was then bolted on the extension without any problem in no time at all.
by: Patrick 04/14/2024
Works great! Wish I would have bought it sooner than pulling off the bumper.
by: Gwen09/13/2019
After figuring out how to mount this hitch on our camper it was evident that it would not bolt up to the existing brackets. We dropped the underbelly and ground off the brackets existing on the trailer and had a welder come in and weld the brackets that came with the hitch on the trailer! We are very pleased with the hitch. We are going to use it for our bike rack and maybe later something heavier!
by: Robert11/19/2022
2021 GMC Sierra 3500
I installed this hitch on a Vilano 320GK. It was listed as the same hitch sold by Vanleigh. The RV has plates welded to the frame to attach the hitch. The installed hitch had very little ground clearance. The RV shop modified the hitch mounting plates and bolted it directly to the frame. The hitch is well made, came with mounting hardware and did fit the RV. My issues were with the mounting provided by the RV manufacturer.
by: Stan11/17/2019
This product is high quality and solid Well designed and fit frame like a glove. Easy for a do it yourselfer
Stan
11/18/2020
It mounted up perfectly and have pulled with it about a dozen times. Works great and complete confidence in the equipment as it is made very heavy duty
25
354
Show More Reviews
See what our Experts say about this CURT RV and Camper Hitch
- Hitch Recommendation for 2019 Jayco Jay Flight SLX 826 for Carrying Bike RackFor your 2019 Jayco Jay Flight SLX 826 the best hitch option would be the Curt multi fit hitch part # 13703 as it fits all frame styles that are between 22 and 72 inches apart and would work great to carry a bike rack like the Swagman Nomad part # S36FR which is approved for use at the rear of a travel trailer like what you have as well.
view full answer... - Adjustable RV Hitch 500 lb. Tongue WeightThe Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide, # 13703. Is our only option for that width, rated at max TW of 350 lb. Anything for that span exceeding 350 lb. will probably need to be custom fabricated.
view full answer... - Which Hitch for Northwoods Fox Mountain TrailerAs long as the distance between the two side to side frame stanchions on your Northwoods trailer is no more than 51" then the Curt # C13701 you were looking at will work. This hitch will work on Box frame, C-Channel frame, or I-Beam frames. If you need something to cover a larger distance, the # 13703 will work on box frame, C-channel frame, or I-beam frames up to 72" apart. I've linked some review and installation videos for you to check out, as well.
view full answer... - Recommended Hitch for Class C MotorhomeWhich hitch you'll need for your Class C motorhome just depends on what the distance between the two frame stanchions that run lengthwise on the coach are; we don't have specific information for individual models, so you will need to measure the distance between those two parts of the frame. The Curt # C13701 you were looking at is designed for Box frame, C-Channel frame, or I-Beam frames that are no more than 51" apart, and has a 2" drop to make it a bit easier to install a ball mount,...
view full answer... - Hitch and Cargo Carrier for 5th Wheel Hitch to Carry GeneratorIn order to carry your generator on the back of your 5th wheel, you will need a hitch so you can attach a cargo carrier. Assuming the ramp on your Palomino will allow the hitch, you can easily add one, the Adjustable Width Trailer Hitch Receiver for RVs # 13703. You simply need to measure the frame to make sure it is between 22 and 77 inches wide outside-to-outside in order to install this hitch, which can then be bolted or welded on. The hitch has a 350 lb tongue weight capacity, which...
view full answer... - Recommended Frame Mount Trailer Hitch for 2018 Airstream Trailer For your 2018 Airstream FC 28 I recommend taking a look at the Curt Adjustable Width Trailer Hitch Receiver # 13703. This is a really versatile hitch that's designed specifically for trailers and RVs and it will fit frame widths between 22 and 72 inches. It will work on box frames, C-channel frames, or I-beam frames and it can be either bolted on with the included hardware (you will need to drill into the frame) or welded on if you change your mind. The Class III hitch will provide you...
view full answer... - Can BikeBase Trailer Tongue Adapter for BikeWing Carrier Work on Ball MountYou actually already mentioned the better option in your question, because I do not recommend using the BikeBase Trailer Tongue Adapter for BikeWing Carrier # LC731157 with the BikeWing 2 Bike Carrier for BikeBase or Bump-It Mounting Adapter # LC731137 on an extended length ball mount. The issue is that it is meant to fit 2" to 4" trailer tongues and I can't guarantee that this is going to be secure enough around a ball mount that fits in a 2" receiver. Instead, if you have the necessary...
view full answer... - Options To Carry Spare Tire On 2019 Forest River R-PodI have a few options to store a spare tire on a 2019 Forest River R-Pod but as you have come to find out, under the trailer will restrict ground clearance too much. Therefore, you can either go on the tongue with a cargo tray, the Stromberg Carlson Trailer Tray Cargo Carrier part # CC-255 or on the rear with a trailer hitch and spare tire carrier, the Adjustable Width Trailer Hitch Receiver part # 13703 and Curt Trailer Hitch Mounted Spare Tire Carrier part # c31006.
view full answer... - What Size Hitch to Use with Blue Ox Alpha 2 Tow BarThe Blue Ox Alpha 2 Tow Bar part # BX7380 is designed to fit a 2 inch trailer hitch. While we don't have a custom fit hitch that was designed for your 2016 Thor Chateau 29G we do have multi fit hitches like the # 13703 which fit frame widths between 22 and 72 inches and all standard frame designs.
view full answer... - Will Adjustable Width Motor Home Trailer Hitch Work on a 2005 Jayco JayFeather M-19HMy first suggestion would be to contact your Jayco in order to determine if they recommend using a hitch on the rear of your 2005 Jayco JayFeather M-19H. You will want to provide them with your VIN for the most accurate information. If they ok the use of a hitch, ask them for the recommended weight capacity. This will be the maximum amount of weight that can be safely hauled on the back of the trailer. A couple measurements will need to be taken in order to see if the Adjustable Width...
view full answer... - Recommended Hitch for a 2019 Lance 2395 Travel TrailerTo add a hitch to your 2019 Lance 2395 Travel Trailer, I recommend the Curt Adjustable Width Trailer Hitch Receiver for RVs item # 13703. This hitch fits frames that measure from 22" wide up to 72" wide. This hitch works on box frames, C-channel frames, or I-beam frames thanks to the bracket design. The Curt Trailer Hitch item # 13703 has a 2" receiver with a towing capacity of 3,500 lbs and a tongue weight capacity of 350 lbs. This will work great for a bike rack. I've linked an installation...
view full answer... - Trailer Hitch Receiver and Bike Rack for Use on 2007 Jayco Jay Feather 19H TrailerThe best hitch type for your 2007 Jayco Jay Feather 19H Trailer will depend on its construction, specifically its bumper. I checked the Jayco website for details about its bumper but no information is offered. So, you'll just want to check your owner's manual for information and guidance related to mounting an accessory hitch. If the bumper is a 4-inch square type then you can use a bolt-on hitch like the Ultra-Fab 2-Inch Motor Home Trailer Hitch Receiver for 4 x4-Inch Bumpers, part #...
view full answer... - Trailer Hitch for a 2015 Camp Lite Trailerto answer your first question, anywhere at all that you can attach the strap will work provided the attachment point on the trailer is higher than the attachment point on the accessory. There isn't a right or wrong place. It just has to be on there. For the hitch, # 13703, you will not want to modify it at all because doing so will void the hitch warranty. If this hitch is not going to work without modification I recommend looking at another option, # UF35-946403 for 47 to 77 inch wide...
view full answer... - Are Trailer Bumpers Rated for Weight of Bumper Mount Bike Rack Before mounting a bike rack like the Swagman RV Bumper 2 Bike Rack # S80605 it is always a good idea to check with the trailer manufacturer to make sure that the factory bumper can support the weight of a loaded rack. Bike racks like this are designed to be mounted to continuous welded steel square bumpers that shouldn't have a problem supporting this kind of weight but it is still up to the trailer manufacturer. There is no universal guideline regarding a trailer bumper's ability to...
view full answer... - Transporting 2002 Yamaha Motorcycle with 2002 Carriage Carri-Lite 5th WheelYour 2002 Yamaha FZ1 has a dry weight of 458 lbs and a wet weight of 509 lbs. Due to this you cannot use a rear mounted carrier on your trailer or a front mounted hitch on your 2015 Ram 3500 4x4. You will be about 50-100 lbs too heavy for the front hitch and well over 200 lbs more than the limit of the rear mounted RV hitch when you add the weight of a carrier as well. Your only viable option is to use a second trailer to tow your bike. You can use the Curt RV hitch # 13703 and ball...
view full answer...
- Recommended Hitch for a 2023 Grand Design 2500RLYes, we do. To add a 2" hitch to your 2023 Grand Design, I recommend the Adjustable Width Trailer Hitch Receiver for RVs item # 13703. It works with frames from 22" wide to 72" wide and comes with the hardware necessary to install. This hitch can be bolted to the frame or welded. There are not any custom fit hitches available for your trailer which is why I recommended a universal one. The Curt item # 13703 has a 3,500 lbs towing capacity and a 350 lbs maximum tongue weight. This will...
view full answer... - Compatibility of Bike Rack on a 2000 Trail Lite Bantam Camper without Mounting on BumperYou have a few options if your 2000 Trail Lite Bantam Camper cannot handle a bumper mounting bike rack. One option is to use a Ball-mount-mounted towing bike rack like the Curt Clamp-On 3 # C18013. This will allow you to carry up to 3 bikes using the ball mount you use to hook up your trailer to your vehicle. It does require a Class III hitch or greater and 3" of space along the ball mount's shank. I have linked the other bike racks that are similar in mounting style to this one for...
view full answer... - Hitch Needed to Tow Small Trailer or Boat Behind 2005 Montana Camping TrailerMy first suggestion would be to contact Keystone to determine if they recommend using a hitch on the rear of your 2005 Montana. If so, ask them for the recommended weight capacity. This will be the maximum amount of weight that can be safely hauled or towed on the back of the trailer. The universal Adjustable Width Trailer Hitch Receiver, # 13703, that you were looking at can be used on box, I-beam, and C-channel frames. Keep in mind that trailer hitches are not designed to fit specific...
view full answer... - Trailer Hitch Recommendation for Rear of 2018 Outdoor RV Glacier Mountain SeriesWe have one solution as long as the weight of the trailer is below 3,500 lbs. The Curt hitch part # 13703 is a multi-fit hitch that can fit trailer frames that are between 22 and 72 inches in width measured outside to outside.
view full answer...
- E-Bike Rack Recommendation Capable Of Being Used On A Motorhome And With A Flat Towed VehicleNot a problem at all! As long as your motorhome has a trailer hitch on the rear, then you can absolutely attach a bike rack to it. If you do not have one currently installed, we have the Adjustable Width Trailer Hitch Receiver for RVs # C13702 which will fit trailers with a frame width of 18" to 51" wide, Or We also have the Adjustable Width Trailer Hitch Receiver for RVs # 13703 which will fit trailers with a frame width of 22" to 72" wide. From here, I recommend going with the Lets...
view full answer... - Recommendation for Carrying Generator on Back of Jayco Lite TrailerFor your 2013 Jayco Lite Trailer, I recommend looking at the Curt Adjustable Width Trailer Hitch Receiver # 13703. This adjustable trailer hitch is designed specifically for RVs and trailers like what you have and will fit frame widths of 22 to 71 inches. It can be bolted to the frame or welded on for a no-drill application. It will provide you with a 2 inch receiver opening and it has a 350 pound tongue weight capacity. I have attached an installation video on this product that you can...
view full answer... - Hitch Solution for Carrying Bike Rack with RV that has Aluminum BumperWe have a solution that would work most likely for you, but we can't recommend you install the Curt RV hitch part # C19101 on an aluminum bumper. Instead, a frame mounted option like the part # 13703 would be your better option. This fits frames that are between 22 and 72 inches apart of all styles. Curt requires the use of their stabilizer strap part # 18050 when using their hitch to carry a non-supported load like a bike rack. I attached a review video for you to check for the strap...
view full answer... - Can Curt Trailer/RV Trailer Hitch # 13703 be Bolted on Through the FrameI suppose that you could bolt Curt trailer hitch # 13703 through the frame if you wanted to. This is one of the most versatile hitches available so as long as you are following one of the methods (bolting on or welding on) then you should be good to go.
view full answer... - Adjustable Width Trailer Hitch Receiver For 1999 Mallard Trailer There are two things you will want to check before purchasing a hitch receiver. First you will want to measure the frame width under your trailer to make sure you choose the correct receiver. You will also need to make sure the stabilizers you have installed do not interfere with installation of the hitch. You may be able to move the jacks to allow installation of the hitch. If your frame is between 22 and 72 inches and is a box frame, C-channel frame, or I-beam frame then the # 13703...
view full answer...
Do you have a question about this RV and Camper Hitch?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
David F
Test Fit:
Kevin C
Expert Research:
Jackie C
Expert Research:
Mike L
Expert Research:
Sarah L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Brandon M
Expert Research:
Adam R
Expert Research:
Jeffrey L
Expert Research:
Sarah H
Expert Research:
Victoria B
Video Edited:
Joshua S
Video Edited:
Chris R
Video Edited:
Zach D
Video Edited:
Jonathan Y
Video by:
Dustin K
Video by:
Schuyler H
Installed by:
Cole B
Updated by:
Wilson B
Updated by:
Hannah L
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Monty
4/22/2024
Product has held up well, Very pleased with the durability and performance.