Adjustable Width Trailer Hitch Receiver For 1999 Mallard Trailer

Updated 06/21/2016 | Published 06/17/2016

Question:

I have a 99 mallard i need a hitch so i can hall my side by side i looked under there i have stabilizer jakes there i was just wondering if the hitch will fit. Or if i can just use a bumper pull

asked by: Tim

Expert Reply:

There are two things you will want to check before purchasing a hitch receiver. First you will want to measure the frame width under your trailer to make sure you choose the correct receiver. You will also need to make sure the stabilizers you have installed do not interfere with installation of the hitch. You may be able to move the jacks to allow installation of the hitch.

If your frame is between 22 and 72 inches and is a box frame, C-channel frame, or I-beam frame then the # 13703 will work for you. This hitch can either be bolted or welded on for installation. Welding should be done by a qualified professional.

To use a bumper mount trailer hitch, your bumper will need to be either a 4 x 4 inch or 4 x 2 inch bumper. I have attached a link to our product page for these hitches you can check out.

expert reply by: Jeffrey L