Recommended Hitch for a 2019 Lance 2395 Travel Trailer

Question

Question:

Trailer hitch recommendation for a 2019 Lance 2395 Travel trailer. I want to carry my two e-bikes approx 50 lbs each.

asked by: Michael M

0

Expert Reply:

To add a hitch to your 2019 Lance 2395 Travel Trailer, I recommend the Curt Adjustable Width Trailer Hitch Receiver for RVs item # 13703. This hitch fits frames that measure from 22" wide up to 72" wide. This hitch works on box frames, C-channel frames, or I-beam frames thanks to the bracket design.

The Curt Trailer Hitch item # 13703 has a 2" receiver with a towing capacity of 3,500 lbs and a tongue weight capacity of 350 lbs. This will work great for a bike rack.

I've linked an installation video of this hitch below so you can see the process.

If you need a bike rack that is rated to be used behind a travel trailer, you will want to go with the Swagman E-Spec Bike Rack for 2 Electric Bikes item # S94FR. This frame mounted bike rack has a 70 lbs per bike capacity.

I have linked a review video below so you can see all the features and capabilities of this rack.

expert reply by: Jerred H

0

Answer 1

Ok, we have some options for you, and I should note that bike racks do need to be approved by their manufacturer for the use on the back of travel trailers like your 2021 Lance 2185. There aren't any travel trailer approved racks for a 1-1/4 inch…

view full answer...

Answer 2

The first thing you need is a hitch and the Curt #13703 is an adjustable width hitch that is going to work with your 2018 Lance travel trailer so long as it has a box frame, C-channel frame, or I-beam frame that is between 22" and 72". As…

view full answer...

Answer 3

I have a good solution but the Draw-Tite Max-Frame Trailer Hitch Receiver part #75082 is not a confirmed fit. Instead the Ultra-Fab 2" Trailer Hitch Receiver part #UF35-946403 is one that can be customized to your trailer frame and give you the…

view full answer...

Answer 4

Yes, the most accommodating trailer hitch receiver we offer is the Adjustable Width Trailer Hitch Receiver part #13703 so this is what I recommend for your 2017 Lance 1475 Travel Trailer. This trailer hitch as you mentioned is a bolt-on option once…

view full answer...

Answer 5

I recommend first installing a trailer hitch on the back of your Rpod, and then a hitch mounted bike carrier. The trailer hitch I recommend is the Curt Adjustable Width Trailer Hitch, part #13703. This will work with RVs that have a frame width…

view full answer...

Answer 6

The frame-mounted Curt Adjustable Width Trailer Hitch Receiver #13703 is your best option for adding a trailer hitch to your Lance 2185 trailer. This model is designed specifically for trailers like this and it can fit frame widths of 22 to 72…

view full answer...

Answer 7

Hello Chris. If you want to put a hitch on the bumper of your travel trailer, I recommend the Stromberg Carlson 2" Motor Home Hitch #BA-100. This is designed to fit a 4" x 4" or 4" x 4-1/2" bumper and provides you with a…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 12

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Recommended Hitch for a 2019 Lance 2395 Travel Trailer

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching