Curt Adjustable Width RV Trailer Hitch Installation - 2016 Keystone Hideout Travel Trailer Video

The Curt Adjustable Width Trailer Hitch Receiver #13703 is one of our most popular hitches for a frame mount installation. This fits with a trailer frame that is 22" to 72" wide which is pretty much anything on the market. You just need to…

I went out to the warehouse and measured Curt trailer hitch #C13704 for you. The distance from the top of the mounting flanges to the top of the cross tube is 2 inches. I have included some pictures with additional measurements for you.

The fuse for the Go Power PWM Solar Charge Controller #GP76QR is not located on the controller itself. It should be inline on the wire running from the controllers positive port to the battery.

We highly recommend against double towing and many states either don't allow double (some states call it triple) towing or have numerous restrictions. Some states limit the total length of all 3 units, some only allow certain types of trailers…

I pulled one of the Curt Adjustable Width Trailer Hitch Receiver for RVs #13703 from the warehouse and measured it and found that the cross tube was approximately 68-3/8" in length. Knowing how manufacturers are I'm sure the intended size is…

The best trailer hitch option we offer for travel trailers is the Adjustable Width Trailer Hitch Receiver for RVs part #13703 as it's very universal and can fit pretty much any trailer due to the adjustable frame brackets and crosstube. It has a…

Yes, we have options available for you to attach a receiver hitch to your 2021 Keystone Raptor 5W Toy Hauler. But before ordering, I suggest you determine if your 5th wheel's frame is rated for this. I suggest contacting your salesperson or the…

I attached a picture I received from Draw Tite that shows the dimensions of Draw Tite hitch part #82201 that you are looking for.

Our fit guide will not list any trailer hitch receivers for your 2021 Grand Design Imagine 24MPR toy hauler as the manufacturers do not make any hitches for the specific trailers. As there are so many different makes and models that are constantly…

The frame not being exposed isn't a big issue since it's just covered up with some corrugated plastic sheeting that can easily be pulled down and cut to fit in accessories. The real issue is going to be with the bumper since it sits right…

It's not designed to. The Curt Trailer Hitch item #C15312 is custom fit for 2001 - 2010 Sierra and Silverado 2500 and 3500s. The width of the bolt holes is the same as the item #3371801102 as you can see from the dimensional diagrams below.…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…