Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
In-stock alternatives that can ship today
Perfect for use with high-powered fans, this cover has a wide vent area so that it provides more airflow than standard covers. EZClip pins allow the cover to be opened and closed with ease. No-drill installation on MaxxFan and MaxxFan Plus vents.
Features:
Specs:
Note: Some vents may not open fully when used with this vent cover. If opened 50% or more, the vent will still achieve maximum airflow.
Designed to work with high-powered roof vents, the FanMate cover offers superior rain protection so that the vent can be opened and the fan can be operated in any weather. The FanMate has a wide vent area that maximizes airflow, preventing heat from building up inside your RV or trailer. EZClip pins make it simple to open or remove the cover for roof vent maintenance. And no drilling is required to install the cover over a MaxxFan or MaxxFan Plus vent.
This FanMate cover is designed to work with any roof vent that has a high-powered, high-speed fan, including MaxxFan Plus vents and certain MaxxFan Deluxe, Fan-Tastic Vent, and Shurflow vents. The FanMate is also taller than other MaxxAir vent covers so that it can provide increased lid clearance, which allows you to open the dome of your roof vent more.
The wide, louvered vent area at the back of the FanMate means that the cover provides more airflow in and out of your RV or trailer than standard covers. The angled louvers allow smoke, odors, and stale air to escape while keeping rain and debris out.
This FanMate vent cover comes with 4 EZClip pins. These pins enable you to easily open or remove the cover. When the pins are removed from one side, the opposite side acts as a hinge, allowing you unobstructed access to your roof vent for cleaning and maintenance. To secure the cover closed, slide the pins back into the cover and push them up to lock them in place.
The FanMate vent cover is specifically designed for installation on newer-model MaxxFan and MaxxFan Plus roof vents. No drilling or tools are required. The integrated mounting brackets on the FanMate perfectly align with the mounting tabs that are molded onto the flange of the roof vent. To install, fit the cover over the roof vent. Then slide the included EZClip pins through the tabs and rotate them up to secure the cover in place.
If you are installing this cover over an older-model MaxxFan roof vent without mounting tabs, no drilling is required and all necessary hardware is included. The MaxxFan roof vent has pre-drilled holes in the side wall that are hidden under plastic plugs. Just remove the plugs and fasten the aluminum brackets to the side wall with the stainless steel screws. Then insert the EZClip pins through the brackets to secure the cover in place.
If you're installing this FanMate cover over any other roof vent, then drilling into the frame of the roof vent may be required. Stainless steel screws, nuts, and washers are included to install the cover. However, if you're installing the cover over a high-powered, high-speed ventilation fan, use the included self-tapping screws to mount the cover instead.
This vent cover is constructed of durable, high-density polyethylene. Special additives help ensure that the material can resist the negative effects of UV rays. And the cover is translucent so that some natural light can shine through.
Average Customer Rating: 4.7 out of 5 stars (381 Customer Reviews)
Perfect for use with high-powered fans, this cover has a wide vent area so that it provides more airflow than standard covers. EZClip pins allow the cover to be opened and closed with ease. No-drill installation on MaxxFan and MaxxFan Plus vents.etrailer exceeded my expectations again. The two MaxxAir vent covers were easy to assemble and install with the easy clips. Great product and great service.
I really like that this cover is extremely easy to install compared to the old style where you had to drill into the fan and fasten clips on to hold the cover. I had two issues; when ordering the etrailer experts did not know if this product would fit my fans. I called Maxxair and was given the information I needed. The holes in the covers where the clips mount were not drilled completely through. A small annoyance. The instructions for assembling the louvre to the cover body should have mentioned that you should start pushing the clips in from the two sides and then clip the center one.
eTrailer.com had the best price for this particular vent cover. They also delivered promptly, so my overall experience was great. Will consider eTrailer.com in the future for parts for my 2000 Coachmen Spirit of America 248TB travel trailer.
Kurt O.
4/10/2023
Vent was easy to install over my vent fan. Functions as intended and provides ample cover and allows ample airflow for my fan.
Matched up perfect. Thanks Kelly
Great customer service, the quality of this part is good. I’m sure it will help extend the vent life beyond the 20yrs that I got with the factory vent cover. Thanks Daniel at Etrailer for your suburb service.
We love it, easy to put together and easy install on the roof of the 5th Wheel.
Delivery was very fast. Product in perfect condition.
Neighbor and I took down old unit and installed new in about 40 min. Plug and play as stated. Excellent so far.Moves more air than old unit.
Had Fantastic Fan with rain-actuated auto-close lid, and it worked fine until the motor/gear drive assembly plastic mounts broke. Replacement system never mounted properly and didn't work, except manually.
On new RV, added Fantastic Fan with thermostat only and, to keep the rain out, added a Maxxair Fanmate vent cover. The pair of fan and vent cover fit well together when installing and the vent cover provides for efficient air flow according to many comments. Simple way to prevent 99% of rain from entering the RV. We love it.
Easy installation and fit perfectly with the MAXXAIR FanMate RV Vents and Fan assy I also purchased from etrailer.com
Perfect. Plenty of clearance to open power vent wide.
Works great and easy to install. Was delivered very quickly.
So far so good. Too bad the insect screens I ordered don’t work. These seem to be of good quality. Installing tomorrow.
Fanmate Roof Vent Cover was simple to clip onto the MaxxFan Roof Vent. I would rate this 5 stars if the bug screen was included from the manufacturer, but it is sold separately.
Michael
5/27/2021
Cover is still in great shape after a year on top of our rig.
etrailer is the best. Very fast shipping. Just what I needed.
What you need if you have a powered vent like Fantastic Fan! Fortunately, the website had enough information that I knew this is what we needed for the powered vent.
Fan cover was exactly what I needed and fitment was perfect. The service I get from the folks at etrailer is unrivaled.
Product wise haven't installed them but I believe they will be good. I just wish my order would have shipped together Instead of two different shipments.
This was a little hard to install, but we made it work for the power vent in our 5th wheel, great service on receiving this product.
Debby
11/2/2016
the vent is great and is still on our fifth wheel
I got this to cover my Maxxfan. Easy assembly and install with the provided clips. Seems a little thin on material but better than an open or lost vent lid.
Andy
9/2/2019
Still good after a year baking in the Nevada sun. I like being able to have the vent open when driving or when its raining.
I installed them on non MaxxAir vents so that we could have them open and not worry about rain or blowing the cover off going down the road. They have worked great so far for me over the year I've had them installed on my camper.
These were easy to install. It took longer to read the instructions and get a sense of what needed to be done than to do the job. They're built to snap right onto their own MaxxAir of fan. But the instructions for the stock bathroom fan and the FantasticFan for my rig worked fine. Hopefully, this means the end of downpours coming in through an open vent. :-)
Super easy to install if you already have a MaxxAir Fan! Only concern is the mounting points are plastic, versus the metal brackets that are provided for non MaxxAir fan. I am sure it will be fine. It will be nice to not to have to worry about rain and our vent being open.
The covers don't allow the lid on my fantastic fan to fully open. The covers rattle in the wind. I paid more for these covers than the MaxxAir I Original Roof Vent Cover because the Mfgr said that the MaxxAir FanMate EZClip Vent Cover was the proper cover but they both fit the same and allow the cover to only open about half way. Twice the price and the fit the same. Dissapointing.
These are perfect. They installed very easy compared to an old off brand set we had previously installed on an old travel trailer. We are able to keep our vents open in any weather and they work with our Max Air fans perfectly.
Seems to be well made and we're easily installed
Do you have a question about this RV Vents and Fan?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Roy
10/20/2022
The covers are working fine. My comments about having to call Maxxair and a little better install instruction still stand.