Add this bug screen to your MaxxAir FanMate vent cover to help keep insects and debris out of your RV or enclosed trailer. It snaps into place behind the louvered vent area on the back of the cover.
Features:
This bug screen has 6 mounting tabs on both the top and bottom of the frame. The tabs allow you to easily snap the screen into place on your MaxxAir FanMate vent cover.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi there RV and camper owners. Today, we're going to be taking a look at MaxxFan's RV Vent Cover Screen. This bug deflector screen is designed specifically for MaxxAir's vent covers. It's designed to have the proper shape to fit on the back of it. So this way, when you've got your vent opened up and you're letting air in, you can ensure that no critters and insects are going to be coming inside to join you. It's a quick and easy installation because it just snaps in right on the backside of the vent cover.
And you can see here, it's going to add that extra layer of mesh behind the grills to keep anything out. Something like this is really useful if you like to sleep with your vents open. This is our customer's bedroom vent right here, and they like a little bit of air flow, like it cooler at night.So having something like this is going to ensure that the mosquitoes and other things aren't going to come in and join you. And you're not going to have a bad time when you wake up, you're just going to wake up refreshed with that fresh air that you're drawing in from the outside, whether you're in the mountains or down by the creeks. So now to insert your screen, it's going to sit like this.
I found that it was easier to put the screen in after you have your vent cover fully assembled. So we're going to put this back piece on. So you can see that these are elongated here and here, on each side. So we're just going to slide that up till it pokes through. And we're also going to do that on the other side, down here.
And then once you got them in there where they poke through, then just give it a twist. And with that elongated end there it's going to lock it in place. And then we're just going to push the top in until it clicks in here on the top.Now that we've got that inserted, we can go ahead and take our cover off. It's actually easier to put the screen in if you just had the whole thing off. So we're going to take the pins out of the sides, and that will allow us to lift the unit completely off of there.
We'll now take our screen. And there's three notches here. Those are going to line up at the bottom with the three clips. So just set that guy down in there. It'll line up there, and then all you need to do at that point is to push down on the tabs until they hook in on the lip right there.And now that we've got it clipped in all the way around, we can just re-install our cover over our vents. So it's just going to drop down on top. We'll line the ends up with our brackets and then slide our pins through to secure it. Put them up, to lock it in place. And once all the pins are secured, your vent cover has been installed, and you're now ready to enjoy the operation of your existing vent, without having to worry about any moisture or critters coming inside. And that completes our look at MaxxFan's, RV Vent Cover Screen.
Average Customer Rating: 4.6 out of 5 stars (29 Customer Reviews)
Add this bug screen to your MaxxAir FanMate vent cover to help keep insects and debris out of your RV or enclosed trailer. It snaps into place behind the louvered vent area on the back of the cover.Works great, easy to install would definitely recommend
These are great and just what we needed.
The maxxair vent screens are excellent and keep bugs out, quick shipping!
Ronnie N - 07/26/2018Purchased from etrailer.com in the past where I received the same very good service with an easy-to-use website. Not having been on their website for a period of time I was surprised to find all the products for RV and Motorhome campers. Their prices are competitive and the MaxxAir Vent Cover Screen that was purchased was received within a very short period of time after ordering. Obviously etrailer.com has their act together.
It doesn't snap in flush and does take a bit of manipulation to get it seated right in the vent. Now imagine yourself on top of your camper doing this. The price is right but it should have been included with the vent from the beginning!
Tougher to get a good fit than I thought but finally got them fitted and installed. Still a very good product that will serve me well as a fulltime RVer.
Blessings,
Good product, fast shipping
Installed ok was hard to get in was not told when I ordered it there was 2 different ones.
Victoria B - 10/28/2020
Easy to install and stays in with no pr oblems.
There was several reviews about poor fit up. It was challenging to get a good fit, not that difficult though.
Seem to be a great idea and are super easy to install! I only provided 4 stars because I don't know how effective they will be. Once I've had them for a while I will update the review.
Easy to install, and no mosquitos got passed it on our recent trip to the coast.
Even harder to get in place than the thing was to put together. It should work fine though. See my previous review on the 5 star thing.
Perfect fit!
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Helpful Link
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.