bing tracking image
Q & A Icon

Can Furrion Vision S/S+ Pair With 2025 Dodge Ram 1500 Tungsten Factory Monitor  

Updated 08/08/2025 | Published 08/07/2025

Question:

Thanks for the info, but we wondered if this camera would pair up with the existing camera system in our 2025 Dodge Ram 1500 Tungsten truck, to be viewed on the factory dash computer screen

0

Expert Reply:

Hey Clarence! That would be great but none of the trailer camera systems are going to pair with vehicle monitors/screens. All of them will require a separate monitor. The Furrion is a really nice system so I do recommend it. Since the Vision S is getting phased out you will want the Vision S+. Parts aren't backwards compatible and you wouldn't want to run into an issue if somehow you broke a camera and couldn't find a replacement for the Vision S. We have the following available:

-Furrion Vision S+ Wireless RV Backup System w/ 1 Camera - 7" Screen # FR57AD

-Furrion Vision S+ Wireless RV Observation System w/ 3 Cameras - 7" Screen # FR64AD

-Furrion Vision S+ Wireless RV Observation System w/ 4 Cameras - 7" Screen # FR74AD

Are you adding a camera system to your travel trailer?

expert reply by:
0
Robin H
Furrion Vision S+
Furrion Vision S+
(click to enlarge)
Clarence profile picture

Clarence

8/8/2025

yes, just bought a camper and already has the set up for the furrion, hoping it would connect with my truck. Thanks for the info

Robin H. profile picture
Etrailer Expert

Robin H.

8/8/2025

@Clarence sorry I was the bearer of bad news. The Vision S+ will fit the same mount and plug as the Vision S so it is compatible with the factory setup. Congratulations on the new truck and camper!
Clarence profile picture

Clarence

8/8/2025

@RobinH Is there a video on how and where to set up the four cameras?
Robin H. profile picture
Etrailer Expert

Robin H.

8/8/2025

@Clarence the closest I have right now is the 3 camera with the Vision S. It is the same installation. The camera system does come with instructions as well, I don't think we have them linked right now. You probably want the 3 camera which is the one that fits the shark fin mount you have plus the side marker. The four camera is if you want an additional camera over your door to the trailer and will require a bit more work. Plus you would need dedicated power to that one for it to work while you're using the trailer.
Clarence profile picture

Clarence

8/8/2025

Does the 7 inch monitor show back up lines and paramotors for parking?

Robin H. profile picture
Etrailer Expert

Robin H.

8/8/2025

@Clarence it does have park-assist lines to help guide your trailer when you back up. They can be toggled on and off as needed.

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>