Product Experts Available Now!
Call 1-800-940-8924
Replacement Manual Crank Handle for Ram Scissor Stabilizer Jacks - 5,000 lbs
(45 reviews)
Price: $34.10
In Stock
etrailer
Replacement Manual Crank Handle for Ram Scissor Stabilizer Jacks - 5,000 lbs
Part Number: TJSC-24-HD
In Stock
$34.10
Need help with installation?
Locate installers near me- All Info
- Reviews (45)
- Q & A (0)
- Videos (1)
- Photos
etrailer Accessories and Parts - TJSC-24-HD
- Camper Jacks
- Trailer Jack
- Handles and Cranks
- Sidewind
- etrailer
Replaces the crank handle on your etrailer or Ram scissor jacks (TJSCHD-24). Handle allows you to manually crank the jacks.
Features:
- Replaces the crank handle on your etrailer or Ram 5,000-lb scissor stabilizer jack set (TJSCHD-24)
- Crank handle allows you to manually crank your jacks
TJSC-24-HD Manual Crank Handle for Ram Scissor Stabilizer Jacks - 2,500 lbs
Video of Replacement Manual Crank Handle for Ram Scissor Stabilizer Jacks - 5,000 lbs
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Replacement Manual Crank Handle for Ram Scissor Stabilizer Jacks Spec Review
Hi everybody, Andy here with etrailer.com and today we're gonna take a real quick look at this Replacement Manual Crank Handle. This is going to replace the crank handle on your etrailer or Ram scissor jacks. And on your screen, I have the item number of the scissor stabilizer jacks that this is going to work with. But this can also be used for other scissor jacks. And of course this handle is going to let you manually crank those stabilizer jacks, and it has this nice easy grip design. So you have this grip on this end here that's going to rotate all the way around, allowing you to easily crank this.
Now the socket, on the opposite end here, is a 3/4" socket, which is going to be your industry size standard for scissor jacks. And from the tip of the socket to the first bend here, we're measuring right about 13-3/4" long. And then from end to end, the overall length is about 27-3/8" long. So this is going to be very simple to use. I happen to have a scissor jack here with a SnapPad on the bottom.
So I just wanted to show you again how easy this is going to be to use. Just go ahead and connect there to the nut and then just begin to crank. Give me some clearance here. And as you can see, as long as you have that nice and greased up, that's going to work really easily for you. So it's gonna be very easy to use, very easy to connect, and it's going to really require minimal effort.
Then it can be easily removed. We'll go ahead and get this out of the way. So that's going to conclude our brief look today. I do hope that it was helpful for you. Again, my name is Andy, thank you for joining me.
.
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Product did not meet expectations
- Wrong item was ordered
Ratings & Reviews
4.8
45 reviews
by:
Mike B.
08/12/2016
First, this crank handle is a high quality product. Would expect to pay 2 or even 3 or more times what etrailer charges for it. I purchased it to go with the set of 4 TJSC-24 Ram Stabilizer Scissor Jacks I purchased which are also a top drawer product at a bargain price.
But here's the kicker, as good as etrailer products and prices are, their customer service is even better.
A great company to do business with.
But here's the kicker, as good as etrailer products and prices are, their customer service is even better.
A great company to do business with.
by:
Kevin
08/06/2024
These scissor jacks and crank handle have been working great.
by:
James C
05/18/2018
These folks are terrific! This is my third order with them and I have been very impressed. Their website has videos on many of the products which are filled with details about product and product use. My only gripe is that if you want to return a product you have to pay for shipping. I understand this but it does make me think twice before ordering. I would recommend this business.
by:
Todd
02/15/2018
It looks like it will work just fine. I will use my drill attachment whenever i can, this is just in case. Nice price and good quality. Speedy shipping.
by:
Steve P.
10/14/2017
Great price. I was extremely pleased as to how heavy duty and rugged this jack handle is. Should last me a long time.
by:
Daren
03/15/2017
This replacement handle is very stout and useful for the scissor jack that it was purchased to be used on.
by:
Rodney R.
07/26/2017
Exactly what I ordered. It showed up quickly at my front door and I got an email confirmation of delivery. Price was right too.
by:
David
02/01/2022
Great product. Excellect customer service from E-Trailer
by:
Wendy
04/22/2020
This works very well- looking forward to enjoy camping again .
by:
Dragon
07/30/2024
Arrived promptly and of better quality than the original crank provided when I purchased the travel trailer.
by:
John W
03/24/2017
Customer service was great the items arrived on time, will buy from them again
by:
Timothy
06/28/2021
Good, sturdy tool. Recommended. Using as part of my VW camper van raising tool arsenal.
by:
David
01/04/2018
Works beautiful.
by:
Warren
02/25/2019
They were excellent to work with.
by:
Daniel
02/07/2018
Package arrived on time and as described! Couldn't of been an easier experience.
Thank you!
Thank you!
by:
David B
01/17/2017
Works great. We will be switching to this design and will need to order 50 at a time.
by:
Robert
09/26/2022
Allison , my sales lady , was extremely knowledgeable, friendly, just an all around great person. Thank you !
by:
B Dunigan
07/17/2016
Works well and good order follow up.
by:
Marc
01/12/2022
highly recommend, friendly and fast!
by:
Ron
03/07/2017
Came in just in time for our first outing with new camper. Thanks
by:
James
09/19/2022
Very attentive to special requests and very prompt service. I am a loyal customer.
by:
Johnny
08/04/2018
What more can a person say about this product it is a jack handle and it works just fine.
by:
Greg
08/05/2016
Great product, Resonabley priced super quick delivery
by:
Jerry
05/18/2018
was what I was looking for
by:
Deanna K
08/24/2017
Works great and seems to be good quality.
25
45
true
Show More Reviews
See what our Experts say about this etrailer Accessories and Parts
- Fit of TJSC-24 Stabilizing Jack on Forest River Rockwood Mini Lite Travel TrailerThe # TJSC-24 scissor style stabilizing jack isn't an RV specific product, if it's 2500 lb capacity and 18-3/4 inch lift and the pictured mounting bolt pattern is compatible with your Rockwood Mini-Lite, it'll work perfectly for you. Please note, the handle is sold separately as part # TJSC-24-HD but it's included if you purchase the pair as part # TJSCHD-24 for the 4 jack set as part # TJSCHD-24-4. If you click the produced link, you can see a product demonstration video featuring the...
view full answer...
- Brainstorming Sidewind Trailer Jack for 2 Inch Receivers On Cargo Trailer Corners For StabilizationInteresting. We don't have that specifically, but there are a couple of routes you could go. Most trailers will use the Scissor Stabilizer Jack - 18-3/4" Travel - 2,500 lbs - Qty 1 # TJSC-24 for stability in the corners so you could mount a receiver shank to that and use # TJSC-24-HD as a sidewind crank. It sounds like you were picturing more of a trailer tongue style option, so you could use a jack like the etrailer Square Jack w/ Footplate - Drop Leg - Bolt On - Zinc - Sidewind - 29-1/8"...
view full answer... - Replacement Scissor Jack for a 2016 R-Pod 178 TrailerIt does appear that your 2016 R-Pod 178 uses the Ram scissor jack, # TJSC-24, so it would be the correct replacement. Should you also ever need a replacement handle it is # TJSC-24-HD.
view full answer... - Nut / Socket Size Used to Raise and Lower the Ram Scissor Stabilizer Jack # TJSC-24The Ram Jack # TJSC-24 measures 3/4 inches. A 19 mm wrench or socket can also be used. The recommended manual crank handle for this unit is # TJSC-24-HD this has the proper size socket for use with these jacks. I have linked the above mentioned products to this page for your convenience.
view full answer... - Length of Replacement Crank Handle for Ram Scissor Stabilizer Jacks End to Bend and End to EndI went out to the warehouse to measure replacement crank handle # TJSC-24-HD. From the tip of the socket end to the first bend it is 13-3/4 inches. The overall length is 27-3/8 inches.
view full answer...
- Recommended Sumo Springs For Small Trailer With 3500 Lb Axle With Bouncy SuspensionIt sounds like your springs are more than likely maxed out if they have a 1750 lbs capacity and your trailer is 3400 lbs loaded. Getting in the trailer and moving around is adding extra weight to the springs as well. If the leaf springs sit below the axle then you can use SumoSprings Trailer Helper Springs w/ Line Relocation Bracket part # TSS-106-40 to support the suspension and increase the stability of the leaf springs to help them last longer. Please keep in mind these are designed...
view full answer... - Can Standard Stabilizer Jacks Be Replaced With Scissor Jacks On A Winnebago Micro Minni 2 108DSAs long as the frame where a scissor jack like the etrailer.com # TJSC-24 has room to be mounted, there should be no issue replacing your current jacks. The base of the # TJSC-24 will measure 10-1/4" long by 3-1/4" wide, so as long as you have that kind of space you will be good to go. However, it should be noted that this jack is designed to stabilize a portion of your trailer's weight and not to support the full weight of your trailer. Do not use this jack to lift your trailer or RV....
view full answer... - Will Scissor Stabilizer Jacks Work on Flagstaff T12RBST TrailerI have no doubts the Scissor Stabilizer Jack # TJSC-24 will work as a perfect replacement for the scissor stabilizer jacks on your 2017 Flagstaff T12RBST camper trailer because it has a large 10" x 3-1/4" mounting base with numerous different bolt hole options, as you can see by the cut out of the base I added. It also has a 2,500 lb capacity and extended height of 23-3/4" which is more than enough for your camper. That said, as a disclaimer we do not have any way of knowing the exact scissor...
view full answer...
- Size Socket Used on Replacement Crank Handle Scissor Stabilizer Jacks - 5,000 lbs, # TJSC-24-HDThe socket at the end of the Replacement Manual Crank Handle for Ram Scissor Stabilizer Jacks - 5,000 lbs, # TJSC-24-HD is 3/4 Inch. That is the industry standard size on the scissor jacks, so it will be compatible with many jack models.
view full answer... - Replacement Stabilizing Jacks For a 2002 Thor Komfort Travel TrailerThe Scissor Stabilizer Jack # TJSC-24 will replace your current stabilizer jacks on your 2002 Thor Komfort 23' travel trailer. This jack is operated by either the 3/4" Socket # UF48-979005 on your drill or with the Manual Crank # TJSC-24-HD.
view full answer... - Will etrailer TJSC-24 Stabilizer Jacks Replace Jack on Rockwood 2104S Mini Lite Travel TrailerI couldn't say whether the etrailer brand # TJSC-24 Scissor Stabilizer jacks would match up to the existing holes in your frame member as I do not know the hole layout, but what I can do is provide you with the bolt pattern used on the jack, which you can compare to the existing holes in the frame to see if they're compatible. There's also a crank handle, part # TJSC-24-HD which is sold separately. I'll also link to a demonstration video that you might find helpful.
view full answer...
- Will Ram Scissor Jack Fit on a 2011 KZ Sportsman 14RBThe Ram Scissor Stabilizer Jack # TJSC-24 is likely going to fit your trailer. The mounting plate is 10 inches long and 3-1/4 inches wide overall so if you have the free space on the frame for that size mounting plate then it will work for you. The handle, # TJSC-24-HD, is sold separately. The mounting plate on the scissor jack is pretty common but if you wanted to look over all of the scissor jack options I have included a link to them for you.
view full answer... - Is the Handle of the TJSC-24 Scissor Jack Sold SeparatelyThe handle part # TJSC-24-HD for the part # TJSC-24 is sold separately.
view full answer... - Socket Size At The End Of The Ram Manual Crank Handle # TJSC-24-HDThe socket at the end of the Replacement Manual Crank Handle for Ram Scissor Stabilizer Jacks - 5,000 lbs, # TJSC-24-HD is 3/4 Inch. That is the industry standard size on the scissor jacks, so it will me compatible with many jack models.
view full answer... - Recommended Replacement Scissor Jack for a 2017 Palomino Palomini Travel TrailerWe have no way to know what came on your 2017 Palomino Palomini travel trailer but with that said scissor jacks are pretty much universal so the Scissor Stabilizer Jack # TJSC-24 you were looking at will work great. This jack also has plenty of capacity at 2,500 lbs so it'll be more than enough to support your trailer. You're also going to need the Replacement Manual Crank Handle for Ram Scissor Stabilizer Jacks # TJSC-24-HD to be able to crank the jack up.
view full answer... - Manual Crank Handle For Electric Tongue Jack On Avenger Touring RVHey Robin, did you intentionally type D-shaped or did you mean S-shaped? Reason I ask, there are S shaped jack handles but I've never seen a D-shaped jack handle; that would be an interesting design! That said, I'll continue with S-shaped handles assuming that's what you are looking for. We don't have a database to know which jack came on your RV, and they change it up quite often, so feel free to let me know the model of your jack. Otherwise, you can see what size socket fits the hex...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Michael H
Expert Research:
Jameson C
Video by:
Dustin K
Installed by:
Cole B
Installed by:
Hayden R
Installed by:
Andy C
Updated by:
Wilson B
Updated by:
Mike S
Written by:
Amanda M
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.