Recommended Sumo Springs For Small Trailer With 3500 Lb Axle With Bouncy Suspension
Updated 01/22/2020 | Published 01/21/2020
Products Featured in This Question
Question:
I built my trailer from scratch. Really. It ended up being 16ft. 3400lbs loaded, 3500lb single axle. 4 leaf 1750 each leaf springs... 3500 for the pair. I have shocks on there. But if I get in there and shift my weight back and forth it sure seems... bouncy. Those springs are maxed out! SumoSprings will fit. But will they extend the life of my maxed out Leafs? Feels right. Just wondering what you think?
asked by: John
Expert Reply:
It sounds like your springs are more than likely maxed out if they have a 1750 lbs capacity and your trailer is 3400 lbs loaded. Getting in the trailer and moving around is adding extra weight to the springs as well. If the leaf springs sit below the axle then you can use SumoSprings Trailer Helper Springs w/ Line Relocation Bracket part # TSS-106-40 to support the suspension and increase the stability of the leaf springs to help them last longer. Please keep in mind these are designed for springs that are in good working order so if your springs are completely worn out the springs cannot do their job.
If your are experiencing a lot of bounce when you are walking around in the trailer, I recommend to add a couple extra stabilizers are as well with part # TJSC-24 with manual crank part # TJSC-24-HD. This will help to stabilize the weight in the trailer when you are parked if you are camping in the trailer. I have attached the mounting pattern for your reference.
Product Page this Question was Asked From
SumoSprings Trailer Helper Springs w/ Line Relocation Bracket - Single Axle - 3K to 5K - Underslung
- Trailer Suspension Parts
- Leaf Spring Enhancement System
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- 3000 lbs
- 4000 lbs
- 5000 lbs
- Single Axle
- SuperSprings Intl
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Scissor Stabilizer Jacks w/ Handle - 18-3/4" Lift - 10,000 lbs - Qty 4
- Search Results: 12 volt light bulb socket
- Search Results: 921 led bulb
- Shop: Vehicle Lights
- Shop: Scissor Stabilizer Jack - 18-3/4" Travel - 2,500 lbs - Qty 1
- Search Results: bottle jack
- Search Results: step brace
- Shop: Weigh Safe Flap Jack Folding RV Stabilizing Blocks - 8" Tall - 6K- Qty 4
- Shop: Replacement Lamp Socket for Ventline RV Range Hood
- Q&A: Does etrailer Carry Replacement for Heng 12V JRP1007B Range Hood Bulb
- Q&A: Fit of TJSC-24 Stabilizing Jack on Forest River Rockwood Mini Lite Travel Trailer
- Q&A: Looking for Replacement Stabilizer Scissor Jack for RPod 179
- Shop: etrailer Scissor Stabilizer Jacks w/ Handle and Drill Adapter - 24" Lift - 5,000 lbs - Qty 2
- Shop: Brake Controller
- Q&A: What Voltage Does Replacement Range Hood Socket # BCB0267-02 Use and Recommended Switch
- Q&A: Replacement LED 921 Bulb for Overhead RV Interior Lights
- Q&A: Are C921 and 921 Bulbs the Same
- Shop: Sylvania 921SL LED Interior and Exterior Accessory Bulb - 0.9 Watt - Qty 2
- Shop: 906/921 LED Light Bulb - Wedge Base - 360 Degree - 215 Lumens - Warm White - Qty 6
- Q&A: What is Difference Between 912 and 921 Bulbs
- Video: Hands-On with the SumoSprings Trailer Helper Springs w/ Line Relocation Bracket
- Video: SumoSprings Trailer Helper Springs w/ Line Relocation Bracket Spec Review
- Video: SumoSprings Trailer Helper Springs Manufacturer Demo
- Search Results: reese trailer hitch ball mount