B&B RV Fresh Water Gravity Fill Inlet - Recessed Dish Mount - Black

Video Transcript for Breaking Down the B and B RV Fresh Water Gravity Fill Inlet

Hello, neighbors and friends, Steven here with etrailer.com. Folks, today we're looking at our B&B RV Freshwater Gravity Fill Inlet with the recessed dish mount in a black color. So folks, this gravity fill freshwater inlet replaces a worn or damaged out inlet. Comes with the cap included, that cap threads on there, and it has the retainer here, that way, it doesn't fall off on you while in use or not in use, whichever. And it's got the inlets here that are barbed fittings and you got the breather. I'm not gonna say a valve, you get a breather line here as well.

This vent attaches via a 3/8" piece of tubing to the tank, so water flows out smoothly and these barbed connections are a 1-3/8" or a 1-1/4" hose depending on your needs. This has been UV stabilized, so it's not gonna fade or yellow on you, and it's resistant to impact and salt spray and that kind of stuff from normal road use. It is NSF, IAPMO, CSA, and TEI certified. You do get the mounting hardware included. They've been painted black on the heads of the screws, which I think is a nice touch, that way it blends in.

And you also get a roll of butyl tape here. If you're not familiar with this stuff. It's like a putty construction. It's gonna give you a nice watertight weatherproof seal. You'll put that around the backside here after you've made your cutout.

And then you'll simply put the screws in and that's gonna squish together onto the side of the RV or camper or whatnot, and make it a nice weathertight watertight seal. The cutout dimension on the back is gonna be 3-1/2" wide. The overall dimension is 4-3/4". The depth of the dish is about 3/4", and the spout depth here is 2-1/2" deep. Nice one year warranty made right here in the us.

This is our look at the B&B RV Freshwater Gravity Fill Inlet. I'm Steven, thanks for watching.