Product Experts Available Now!
Call 1-800-940-8924
Replacement Sidewind Gear Kit for etrailer and Ram Square, Direct Weld Jacks - 10,000 lbs
(72 reviews)
Price: $45.01
In Stock
etrailer
Replacement Sidewind Gear Kit for etrailer and Ram Square, Direct Weld Jacks - 10,000 lbs
Part Number: TJD-12000-GR
In Stock
$45.01
Retail:$47.70
You Save: 6%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (72)
- Q & A (0)
- Videos (2)
- Photos
etrailer Accessories and Parts - TJD-12000-GR
- Camper Jacks
- Trailer Jack
- Motor and Gear Parts
- Gears
- etrailer
Replaces the gears and roll pins on your etrailer or Ram square, direct-weld trailer jack with a 10,000-lb lift capacity. Designed for TJD-12000 Series jacks.
Features:
- Replacement gear kit works with etrailer and Ram square, direct-weld jacks that have a 10,000-lb lift capacity
- Designed for use with TJD-12000 Series jacks
- Kit includes 2 gears and 2 roll pins
TJD-12000-GR Replacement Sidewind Gear Kit for Ram Jacks - 12,000 lbs
Video of Replacement Sidewind Gear Kit for etrailer and Ram Square, Direct Weld Jacks - 10,000 lbs
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of etrailer Replacement Sidewind Gear Kit etrailer Ram Square Direct Weld Jack - TJD-12000-GR
Hi, everybody, Andy here with etrailer.com. And today, we're gonna take a real quick look at this replacement sidewind gear kit for etrailer and ram square direct-weld jacks. Now, this is going to replace the gears and roll pins on your etrailer or ram square direct-weld jack with a 10,000 pound lift capacity. This is designed for the TJD-12000 series jacks. And it includes everything that you see here on the table before me. You're going to receive two gears and two roll pins.
So if you are needing to replace the gears and roll pins on your etrailer or ram square direct-weld jack with a 10,000 pound lift capacity, this is going to be exactly what you need. Well, that's gonna conclude our brief look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.
.
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Arrived Damaged
- Product did not meet expectations
- Wrong item was ordered
Ratings & Reviews
4.6
72 reviews
by:
Kevin
04/23/2026
Fit perfect! Check the crumpled paper in your packaging if the pins are MIA. Mine came out of the bag and initially seemed to not be in the shipment. All worked out fine once I found them! 4 stars for the Caveman tolerance gear set!
by:
Timothy
09/27/2025
I bought the whole kit, not just the gear part at the top but the whole rod and everything and it's really weird that y'all don't send the end bearing with that kit. That's a common sense thing $21 part that y'all can complete it would be Who view to include that part and also show a parts diagram so that people could see exactly how those parts come together The grease pan also should be tacked on or already installed. Those few things will help your quality control if you're serious about it if you're not keep doing what you're doing and be just like everybody else fair parts high prices and not really listening to your surveys sincerely Tim Scally
by:
Floyd
07/14/2026
Great price great service and fast delivery I am proud of y'all
by:
Bob
03/18/2026
works great
by:
Joey
04/04/2026
Keep us camping
by:
Chad
01/09/2026
Order was delivered quickly and everything fit perfectly. Would definitely buy from again as well as recommend anyone.
by:
Gmouton
08/28/2018
Product came with all the stuff I ordered tried to install new equipment on the old screw shaft but the older screw was larger diameter then new screw shaft so installed all the new equipment ordered all went well easier fix then installing a new ram jack at a coast of 200 dollars not counting a welder cost. Shipping time was great thanks again
by:
Brian
01/28/2020
The order got here much quicker than expected. The online video of how to repair the landing gear was a great resource to help order the correct parts needed for the rebuild. The rebuild of the landing gear went just as the video instructed. Great job, Thanks!
by:
Tony
08/18/2016
Replacement parts were delivered as stated and corrected my issues with my jack.
by:
Tim
07/15/2024
Haven’t used yet but look like good product. Fast shipping and good customer service
by:
Lane
02/28/2022
I bought these parts and a few others as spares. Nothing but positives for Etrailer.
by:
James
11/13/2020
Fast shipping
by:
Tyler
08/26/2022
Easy to install and operates smoothly.
by:
Andrew
03/08/2023
Perfect fit for replacement
by:
Kevin
05/16/2019
These gears were not an exact fit for my application but it turns out now it takes less cranking to height.
by:
Dean
10/31/2019
Product was good, but the help I got from Gwen was beyond outstanding. She helped me make sure that I ordered the right parts, got them shipped earlier than expected and therefore delivered ahead of schedule, which made my customer happy. She deserves 5 stars!!!
by:
James
12/29/2020
Product is exactly what I ordered.
When delivery of item was several weeks out, I was contacted about possible substitutes that were available and delivery much sooner. That is great service.
When delivery of item was several weeks out, I was contacted about possible substitutes that were available and delivery much sooner. That is great service.
by:
John
02/21/2023
Still holding up and operating very well
by:
@
10/13/2026
by:
Daniel
05/02/2021
Very pleased
by:
William
07/31/2023
Nicole was very helpful In finding and sending my parts in a very timely manner. Thank you for everyone’s help and nicole also.
by:
Nick sheaffer
11/03/2018
Had what I needed and got it delivered in a reasonable time
by:
Aric
08/13/2022
Horrible service, empty boxes delivered
Katrina B.
8/23/2022
I am sorry to hear that you have not received your order. I see that our customer service department is in the process of getting this corrected and sent out to you. Once you received this item, we would love to hear your updated feedback.
by:
James
04/27/2026
by:
Arnold
08/10/2026
25
72
true
Show More Reviews
See what our Experts say about this etrailer Accessories and Parts
- Are Side-Frame Mount Jacks Available With Different Gear RatiosFor that I recommend an electric jack set like the Ultra-Fab Deluxe Electric Landing Gear Set # UF17-943010 which has a combined 12,000 lbs of capacity, and offers 38" of lift.
view full answer...
- Looking For Gears For Trailer Jack On A M101A3 Military TrailerHello James. It sounds like you are looking for a gear kit for the jack on an old M101A3 Military trailer. I am not aware of any gear kits offered for this trailer, so if yours are in need of replacement, your best bet will be to replace the jack entirely. Something like the Square Pipe Mount Swivel Jack w Footplate # TJDP-7000S-B will work well for attaching to the tongue of the trailer. It is rated for 7,000 lbs and has 28-1/2" of total lift.
view full answer... - What are the Dimensions of the Roll Pins for the Ram 12K Series Jack? Hi Thomas, From what information I could find, the roll pins are 1/4" in diameter and 1 1/4"long. We don't have just the roll pins available, but we do have a whole repair kit for the etrailer and Ram 12K series jacks, which is the Replacement Sidewind Gear Kit for etrailer and Ram Square, Direct Weld Jacks - 10,000 lbs Part # TJD-12000-GR. It contains the replacement gears and roll pins for your Ram 12K series jack, even though you many not need the gears now, it'll be good to have...
view full answer... - Replacement Parts for the Square Direct Weld JacksI went ahead and linked the video you are referencing about rebuilding a square jack like the Square Direct Weld Jack # TJD-12000SP-F2 from our website to this answer. We have a number of replacement parts in that video and some that were not included in the video, I have listed them all for you below. Replacement Cap # TJD-12000-CP Replacement Return Spring # TJD-12000-RSP Replacement Sidewind Gear Kit # TJD-12000-GR Replacement Plunger Pin Assembly # TJD-12000-PPN Replacement Bearing...
view full answer... - Replacement Parts For Ram 12K Support Capacity Jack # TJD-12000SP-F2Here is a list of the replacement parts we have for the Ram 12K Support Capacity Jack # TJD-12000SP-F2 you found. Replacement Sidewind Crank # TJD-12000-HD Replacement Plunger Pin Assembly # TJD-12000-PPN Replacement Cap # TJD-12000-CP Replacement Return Spring # TJD-12000-RSP Replacement Handle Clip # TJD-12000-CLIP Replacement Handle Shaft # TJD-12000-SHABUS Replacement Rod and Nut # TJD-12000-RODNUT Replacement Bearing # TJD-12000-BR Replacement Sidewind Gear Kit # TJD-12000-GR
view full answer... - How to Replace Interior Ram Jack Rod and Nut # TJD-12000-RODNUT on 12000 Series JacksGood news! I was able to get a exploded diagram as well as a set of instructions on how to replace the rod and gears # TJD-12000-RODNUT in the # 12000 Series Ram Jacks made after 2012. I have attached them to this page for your convenience. Basically, you will not need to remove or cut the steel plate inside the top of the jack to do this. You will want to remove the cap, then the roll pin that holds the cross shaft into the leg, this will free up the smaller gear that will be removed...
view full answer...
- Replacement Gears for 12,000 lb Leg from Unknown BrandThe Replacement Gear Kit for Bulldog Sidewind Jacks w/ 12,000-lb Capacity # BD500212 are not a confirmed fit for all 12K legs. I've attached a photo with measurements to help you determine if this gear kit will work for your application. The Replacement Sidewind Gear Kit for etrailer and Ram Square, Direct Weld Jacks # TJD-12000-GR is another option. On this kit the taller gear has an inner diameter of 1-3/4 inches and an outside diameter of 2-1/2 inches. The shorter/wider gear has...
view full answer...
- Repair Kit for Ram Series 12000 Trailer JackTo repair a Ram Series 12000 jack, like # TJD-12000SP-R2, we have the Gear Kit # TJD-12000-GR or the Replacement Rod and Nut # TJD-12000-RODNUT. Or you could need both. I just depends on what the problem is exactly.
view full answer... - Replacement Pins for Ram 12000 JackWe have the Replacement Sidewind Gear Kit for etrailer and Ram Square, Direct Weld Jacks # TJD-12000-GR which does include 2 roll pins. This is for the TJD-12000 Series jacks. If that is the jack you have then these will work. If you have a different jack please let me know what jack you have and I can help you locate the correct part you are looking for.
view full answer... - Ram Square Jack Replacement Screw AssemblyWe have several replacement parts for the internals of a Ram brand square jack. The Replacement Rod and Nut # TJD-12000-RODNUT will fit the following Ram jacks: # TJD-12000SP-F2 10K Sidewind with 12-3/8 inches of travel w/handle # TJD-12000SP-R2NH 10K Sidewind with 12-1/4 inches of travel w/o handle # TJD-12000SP-R2 10K Sidewind with 12-1/4 inches of travel w/handle Some other replacement parts for these Series jacks are: # TJD-12000-GR Replacement Gear Kit # TJD-12000-BR Replacement...
view full answer...
- Replacement Parts for etrailer Square Direct Weld JackIt sounds like you're talking about the rod and nut on the # TJD-12000SP-R2NH. We have the following replacement parts available: -Replacement Rod and Nut for etrailer and Ram Square, Direct Weld Jacks # TJD-12000-RODNUT -Replacement Sidewind Gear Kit for etrailer and Ram Square, Direct Weld Jacks # TJD-12000-GR -Replacement Return Spring for etrailer and Ram Square, Direct Weld Jacks # TJD-12000-RSP -Replacement Bearing for etrailer and Ram Square Jacks # TJD-12000-BR -Replacement...
view full answer... - Replacement Gear Kit for Ram Jack With 12,000 lb CapacityThe # BD500212 is specifically made for Bulldog jacks. Based on the 12,000 lb capacity and 10,000 lb lift on your Ram jack it sounds like you have a TJD-12000 series jack like the # TJD-12000SP-F2. The correct gear kit would be the # TJD-12000-GR. If you need additional replacement parts we have the following: -Replacement Sidewind Crank for etrailer and Ram Square, Direct Weld Jacks - 10,000 lbs # TJD-12000-HD -Replacement Handle Shaft for etrailer and Ram Square, Direct Weld Jacks -...
view full answer... - Gear Kits for Single Speed Ram or etrailer JackIt is not possible for me to tell you with any degree of certainty that you can retrofit the Replacement Gearbox for etrailer and Ram 2-Speed Square Jacks # TJD2SP-12900-GBX for use with a single speed Ram jack though there are replacement gears available. If you have the TJD-12000 Series jacks such as # TJD-12000SP-R2 there is the Replacement Sidewind Gear Kit # TJD-12000-GR as well as Replacement Rod and Nut for etrailer and Ram Square, Direct Weld Jacks # TJD-12000-RODNUT which you...
view full answer... - Threaded Rod, Gears, and Pins for Ram Square Sidewind JackFor your Ram 10,000 lb jack, it sounds like you will need to rebuild it as the amount of force used most likely damaged the gears and the threaded rod. I recommend the Replacement Rod and Nut for etrailer and Ram Square, Direct Weld Jacks - 12K # TJD-12000-RODNUT along with the Replacement Sidewind Gear Kit for etrailer and Ram Square, Direct Weld Jacks - 10,000 lbs # TJD-12000-GR designed for use with TJD-12000 Series jacks. There is most likely not a clean and easy way to remove the...
view full answer... - Availability Of Replacement Gears For Ram 12000lb Sidewind JackI have another option for you, but there is not a complete gear box available for your Ram 12000lb Sidewind Jack. We have the Replacement Sidewind Gear Kit for etrailer and Ram Square, Direct Weld Jacks # TJD-12000-GR which is all of the replacement gears needed to rebuild the jack. The only other option would be to replace the jack using the # TJD2SP-12000SP-F you were looking at. I included videos of the products mentioned for you to take a look at.
view full answer... - Replacement Gears On Sidewind Jack InstallationI don't have a diagram on installing the replacement gears like # TJA-2000S-GR or # TJD-12000-GR. I do however have a video to show you how to do it that I have attached.
view full answer... - Replacement Gear Kit For Bulldog 12K JackHi Al! Unfortunately, Bulldog's parent company (First Brands) has had some... "issues" as of late and their parts are basically impossible to get ahold of. Look them up online and you will see what I mean. Due to all this, we have taken all their parts off our website. Hopefully they come back at this point, but who knows. That said, I did a cursory look online and there may be some still available elsewhere. However, I would call however says they do have them to double check. This has...
view full answer... - Do Nut & Bearing Come Separate For Ram/etrailer 12k Support/10k Lift Square JackThe replacement nut and bearing for the Ram/etrailer 12k support/10k lift square jacks are not available separately as they are only packaged together with the shaft: - Replacement Rod and Nut for etrailer and Ram Square, Direct Weld Jacks # TJD-12000-RODNUT As for the roll pins, they are also available, but are come in the package with replacement gears: - Replacement Sidewind Gear Kit # TJD-12000-GR While I know this isn't what you were looking to hear, you will have some extra parts...
view full answer... - Replacement Roll Pins And Gears For Ram 10K Trailer JacksFor your 10K Ram Jack, you can use the Replacement Sidewind Gear Kit for etrailer and Ram Square, Direct Weld Jacks # TJD-12000-GR to replace the roll pins. This kit also includes 2 gears, and is designed for use with the TJD-12000 series jacks.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Video Edited:
Jacob T
Video Edited:
Jonathan Y
Video by:
Kathleen M
Video by:
Evan R
Installed by:
Randy B
Installed by:
Evangeline M
Installed by:
Andy C
Updated by:
Wilson B
Updated by:
Mike S
Written by:
Amanda M
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Tyler
8/27/2023
Working well. No issues.