Ram Square Jack Replacement Screw Assembly
Published 10/02/2018
Products Featured in This Question
Question:
Hello, I have two Ram brand square jacks, side frame mount, 10,000lb on a 40foot tripple axle gooseneck trailer I purchased. I dont think the previous owner greased the jacks at all during use. I have greased them thoroughly and its slightly better, but think the screw assembly is toast. Meaning I can barely crank the jacks at all. I have not disassembled the jacks to confirm this is the case because the trailer is currently loaded and hooked to a truck. I will probably have to lift the trailer off the truck with a floor jack once its unloaded. From my previous square jack repairs, its typically the nut that galls up. Change the nut and properly grease for years of continued use. Does etrailer offer the, nut, screw, or entire screw assembly as a replacement part? Or would I have to buy the entire jack and remove the assembly to install into my existing jacks? The jacks are welded to the trailer inside a tool box under the neck, so cutting old ones out and welding new ones in would be a chore. Thanks in advance for the feedback.
asked by: Nicholas J
Expert Reply:
We have several replacement parts for the internals of a Ram brand square jack. The Replacement Rod and Nut # TJD-12000-RODNUT will fit the following Ram jacks:
# TJD-12000SP-F2 10K Sidewind with 12-3/8 inches of travel w/handle
# TJD-12000SP-R2NH 10K Sidewind with 12-1/4 inches of travel w/o handle
# TJD-12000SP-R2 10K Sidewind with 12-1/4 inches of travel w/handle
Some other replacement parts for these Series jacks are:
# TJD-12000-GR Replacement Gear Kit
# TJD-12000-BR Replacement Bearing
# TJD-12000-CP Replacement Cap
# TJD-12000-PPN Replacement Plunger Assembly
# TJD-12000-CLIP Replacement Handle Clip
# TJD-12000-HD Replacement Handle
Product Page this Question was Asked From
Replacement Sidewind Crank for etrailer and Ram Square, Direct Weld Jacks
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Handles and Cranks
- Sidewind
- etrailer
more information >
Continue Researching
- Shop: Trailer Hitch
- Shop: Base Plate for Tow Bar
- Shop: Replacement Rod and Nut for etrailer and Ram Square, Direct Weld Jacks - 12K
- Shop: Mounting Bracket for Optronics 90 Series or 91 Series Trailer Lights - Self-Grounding - Black
- Search Results: bed matt
- Shop: etrailer Square Jack - Side Pin Drop Leg - Spring Return - 10K Lift - 25-3/4" Travel
- Search Results: reed switch
- Search Results: trailer leaf springs
- Search Results: ram trailer jack
- Search Results: gooseneck coupler
- Search Results: roadmaster battery disconnect
- Search Results: 70015
- Shop: Mighty Cord 7-Way RV-Style Trailer Connector w/ Molded Cable - Trailer End - 6' Long
- Shop: Replacement Lifting Nut for Curt Heavy Duty Direct Weld Square Jack
- Shop: Trailer Wiring
- Shop: Blue Ox Base Plate Kit - Removable Arms
- Q&A: How to Replace Interior Ram Jack Rod and Nut # TJD-12000-RODNUT on 12000 Series Jacks
- Article: How to Choose the Right Trailer Hitch Class
- Video: etrailer Jack Replacement Plunger Pin Assembly Installation
- Shop: Steel Mod Silver Trailer Wheel - 15" x 5" Rim - 5 on 4-3/4
- Video: Hands-On with the Square Direct Weld Jack
- Shop: Suspension Enhancement
- Shop: Vehicle Tow Bar Wiring
- Shop: Radiator Fan
- Q&A: Replacement Screw Kit for Older Ram 10K Jack
- Video: Square Direct Weld Jack: The Breakdown
- Video: Review of Premium - Dexter Trailer Jack - DX32CR
- Q&A: How To Re-Assemble The RAM TJD-12000SP Trailer Jack
- Q&A: Replacement Inner Jack Tube With 3-1/2" X 3-1/2" Square Tube
- Q&A: Replacement Parts for Ram 12000 Series Jacks