Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replaces the extend/retract waterproof switch and wiring harness for your Lippert electric stabilizer jack (LC298707).
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the replacement electric jack switch with harness for Lippert components high speed stabilizer jacks. This is going to replace the extend retract switch for your Lippert electric stabilizer jack, part number LC363284. It's going to feature a rating of IP66, which makes it a nice weather resistant unit. It's got a sealed design on the back side, so it's going to do a great job at protecting the internal components from dirt, dust, grim and moisture. The unit is black in color. On the back side it also has a foam gasket.
That's going to help create a tight seal at the mounting surface. You can see that it has all the wires coming out of it, so you can easily get it connected to control the jack. Few measurements to go over with you. Measuring this direction edge to edge it's going to measure 2 and 1/4. Going this direction edge to edge it's going to measure about 3 and 1/4 to 3 and 5/16 of an inch. You'll notice it has all the pre-drilled mount holes on it.
Mounting hardware not included. The unit's very easy to control and operate. It's got the textured surface right there on the push area. It makes the switch very easy to control and operate. With this part number you're going to get one switch with the wiring.
That's going to do it for today's look at the replacement electric jack switch with harness for Lippert components high speed stabilizer jacks.
Customer Satisfaction Score:
100% were satisfied with this product
0% of customers were not satisfied
Ratings & Reviews
Jerry
6/6/2020
Still good... Works like new.
Hilda
4/9/2019
Working just fine would recommend this product
Sean
3/13/2019
Great!
Wire W.
11/3/2020
One year later and 40 or 50 uses later, these switches continue to perform well! The true test is how they tolerate the locked rotor current if the operator holds the button at end of travel causing 5x the current draw of normal motor operation. I always observe and allow the jacks to coast near the end, then tap until seated.
Gary R.
9/28/2018
Very good no further problem
Steve
6/27/2018
Product works as expected, expensive and took a long time to receive it but had no other options
Woody F.
8/1/2020
Still doing great !!
John
4/25/2022
Switch has worked flawlessly . Excellent replacement would recommend
Vern
6/15/2019
The switch works like it should. Very satisfied
Ronald
8/25/2021
Still going strong!
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Diann
7/23/2018
Still completely satisfied!