bing tracking image
Q & A Icon

Where are Circuit Breakers/Fuses Installed on Lippert Electric Stabilizer Jacks  

Updated 08/20/2025 | Published 11/27/2018

Question:

Camper has lci 113407 and they wont go up or down thinking its a blown fuse but cant find the location. Any suggestions?

0

Expert Reply:

The Lippert stabilizer jacks like you have use an 6 amp auto reset circuit breaker and a 20 amp fuse or breaker. If you check out the diagram I attached you'll see how it normally would be wired.

For a 20 amp breaker you'd need the part # PK54520 and for a 6 amp breaker part # LC134181. If somehow the motors are bad they are part number # LC138445.

expert reply by:
0
Jameson C
click to enlarge
Rick profile picture

Rick

8/20/2025

Part Number: LC134181, Type: 6 Amp Auto-Reset Circuit Breaker Is not an Auto-Reset Circuit Breaker, it's only a fuse. It's mislabeled. on my 2025 FR TT I went through 3 of them on the front Lippert PSX1® High-Speed?RV Power Stabilizer Jack System before replacing it with an 8a breaker that is resetable.

Jameson C. profile picture
Etrailer Expert

Jameson C.

8/20/2025

@Rick Good to know! Sometimes Lippert updates things for reasons that elude us and change things so I am curious if you have a newer or possibly older setup that used a fuse instead of the breaker.
Rick profile picture

Rick

8/20/2025

@JamesonC BTW, I'm sure you know this, Lippert buys the fuse from a 3rd party. Tech support had no idea if it was an auto-reset breaker like it's listed or a fuse.
Jameson C. profile picture
Etrailer Expert

Jameson C.

8/20/2025

@Rick That is not super surprising ha.

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>