Troubleshooting Lippert Power Stabilizer Jack That Will Extend But Not Retract
Published 03/05/2024
Products Featured in This Question
Question:
My rear extension stabilizer will extend but not retract all connections seem to be solid. Model # 377199
asked by: James B
0
Expert Reply:
It sounds like you have a bad Switch # LC387874 on your Lippert High-Speed Power Stabilizer Jack # LC298707. The part number you have 337199 does not come from Lippert with a power switch so you may have a different switch used. To verify if the problem is the switch you can simply switch the wiring around on the switch or jumper the power and ground wires to see if the jack will then retract.
If the jack will still not retract there is something damaged inside the Motor # LC352338.
expert reply by:
Bud M
0
