RV Landing Gear Switch - 12V - Black
(127 reviews)
Price: $12.50
In Stock
RV Landing Gear Switch - 12V - Black
Item # 37213635
Retail:$22.43
Our Price: $12.50
You Save: 44%
Orders above $99 qualify for Free Shipping
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (127)
- Q & A (0)
- Videos (1)
- Photos
- Why etrailer?
JR Products Accessories and Parts - 37213635
- Camper Jacks
- Trailer Jack
- Switches
- JR Products
12V switch replaces the extend/retract switch for your 5th-wheel or tongue jack. Momentary-on/off/momentary-on switch assembly. 16 amps at 125V AC (CSA), 15 amps at 125V AC (UL), 10 amps at 250V AC, 3/4 hp at 250V AC, 30 amps at 12V DC.
Features:
- 12V switch replaces the extend/retract switch for your 5th-wheel or tongue jack
- Momentary-on/off/momentary-on
- Switch dimensions: 1-47/64" tall x 61/64" wide
- Cutout dimensions: 1.300" x 3/4"
- 16 amps at 125V AC (CSA), 15 amps at 125V AC (UL), 10 amps at 250V AC, 3/4 hp at 250V AC, 30 amps at 12V DC
- UL/CSA/CUL/IP55 RoHS approved
- Black
- Made in the USA
13635 JR Products RV Landing Gear Switch - 12V - Black
California residents: click here
Video of RV Landing Gear Switch - 12V - Black
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of JR Products Camper Jack Parts - Fifth Wheel Landing Gear Switch - 37213635
Hey everyone. I'm Ellen here at etrailer.com. Today we're taking a look at the JR Products, RV Landing Gear Switch, and this is going to be a replacement for any kind of damaged or broken switch that would need to extend or retract for your fifth wheel or Tongue Jack, that this is going to be a momentary style switch. So that just means that whenever we press that down and hold it, that's going to engage our motor to either extend like I have it here. As soon as we let go, it'll stop. Same thing for the other side.
If we want to retract, it'll go until we release that switch. So it's only engaged for the moment that we have it held down. The back will have our connection points to get everything wired up correctly. This is rated for 16 amps at 125 volts AC, 15 amps at 128 volts AC UL, and 10 amps at 250 volts AC, with three quarter horsepower at 250 volts AC, and 30 amps at 12 volts DC.As far as the size, this is going to measure about three quarters of an inch for the cutout. And then I'd say that you probably just need about an inch and a half for the other direction.
It has these little tines on either side that will squeeze in place and then hold the tension to keep that there. If we push those all the way in it's a little bit narrower than that. It's closer to about one and three eights of an inch, but anywhere between one and three eights and one and a half inch, you should probably be good, as far as that cut-out size. The overall size of the switch, it's about an inch by an inch and three quarter. The distance that it's going to come out away from wherever we're mounting it to is about three eights of an inch.
The total length, including the tines on the end or those spade connectors is about one and seven eighths inches. Just for reference there. This does come in black it's labeled extend and retract, and it is made in the USA. That's going to do it for our look at the JR Products, RV Landing Gear Switch..
Customer Reviews
RV Landing Gear Switch - 12V - Black - 37213635
Average Customer Rating: 4.7 out of 5 stars (127 Customer Reviews)
12V switch replaces the extend/retract switch for your 5th-wheel or tongue jack. Momentary-on/off/momentary-on switch assembly. 16 amps at 125V AC (CSA), 15 amps at 125V AC (UL), 10 amps at 250V AC, 3/4 hp at 250V AC, 30 amps at 12V DC.by: Tom12/25/2021
Tried to find this Atwood landing gear part only to find they were bought out by another company and my lift was no-longer available and parts are scarce to find. I had previously visited the etrailer sight for running lights that pace american trailer used and figured i would give them a try. Low and behold they had a switch similar to the one I had. I ordered the switch thinking that I would have to modify my lift body to accommodate the switch, when I recieved the switch I found that it fit perfectly and according to the wiring diagram the people at Atwood had wired it incorrectly. Im happy I no longer have to use the rescue hand crank.
by: Craig08/11/2022
I was actually disappointed in the switch I received it wouldn’t stay in my LCI battery controlled tongue jack and doesn’t work well the switch seems to be very “sticky” so if I’m not careful it will just keep retracting or extending if I let go of the switch!
by: Robert09/14/2022
I cannot believe your service!!! First, I did a google search on a Sunday. Your site came up with the one of the parts I wanted, but not the other. I called you support line thinking I would get a recording on a Sunday, but "No" a real person. I told her what I was looking for, she went to other sites to get sku's to cross reference in your site, but was unable to find it, but she spent the time for a $xx item. I ordered the part you had on Sunday, with standard shipping, and I received it on Weds. I live in the middle of no where, and [other online stores] can't get me my orders that fast.
Customer Support: Outstanding
Pricing: Outstanding
Product knowledge:Outstanding
email communication: Outstanding
responsiveness: Outstanding
I don't normally give reviews, and when I do, it is normally to complain. I just can't believe how good you guys are!!!
I included a photo. You can see I installed the switch that you have, we will see how long it takes for the other switch from a different company (and I might add, a simple on off switch at three times what this switch cost from you) I broke the switches driving my tractor with the box scraper too close. Luckily it was only the switches I hit.
by: Nobody special06/08/2022
Toggle switch works fine. My only gripe is the plastic spring tabs that are supposed to hold this switch in place are weak. They do not hold the switch in place. The wires are pretty much what keep it from falling out. There is also no gasket or seal to help keep moisture out. All this makes the switch look and feel cheap. Granted, this isn’t an expensive part.
by: PETER06/27/2022
OEM replacement, too bad when I started researching this part I was directed to buy the wrong part for fitment. Once I figured it out, I contacted etrailer and Carol C took care of me. Thanks, because of your help, I have been out camping twice.
by: Grant 07/17/2022
It fit perfectly in my '05 RV, spent $4 on electrical connections and presto. Worked the 1st time...matched great, fit great!
by: Mark 08/18/2022
Receive the switch, pretty easy to install. I did watch the video which refresh some brain cells. Customer Service is great. I'll be back for more stuff
by: George06/19/2022
The switches arrived when they said they would. The switches operate opposite from my switches. So I'm glad I ordered two, so I just swap both of them out.
by: Jack09/03/2022
Switch started sticking about the third time I used it have to be very careful and make sure it is off. I have two of them and both stick. Would not recommend
by: Paul06/20/2022
The part was exactly what was needed to fix my tongue Jack. The size was a little bigger than original but if you're a camper you probably know how to use a razor knife and a little goop for sealant. The part was a good price and I received it a day sooner than advertised.
by: John12/22/2021
I WAS DISAPOINTED THAT THIS SWITCH DID NOT COME WITH THE RUBBER WEATHER PROOF SEAL AND THE SWITCH ITSELF WAS A BIT SMALLER THAN THE ORIGINAL SWITCH. I HAD TO MODIFY THE SWITCH TO GET IT TO FIT TIGHTLY. ELECTRICALLY THE SWITCH WORKS FINE AND SHOULD HOLD UP.
by: Greg 09/16/2022
haven't installed it yet. price was great and arrived on time.
by: David 09/26/2022
Just what I needed and on time. Thanks
by: David04/14/2022
This switch was an exact replacement and worked well. Very Satisfied.
by: Nate 08/26/2022
Fits perfectly! Jack is back in service !!
by: Joe07/29/2022
Works great except it's opposite extend and retract. Probably I just got the wiring wrong. :)
by: Jack 08/18/2021
This switch replaced my old one and works amazing on my trailer jacks I was very happy with etrailer fast shipping !!!
by: Leslie 08/05/2022
I think I found the place to get what I need!
by: Eric05/23/2022
Good replacement part
by: Thomas 07/11/2022
Switch will work. Not the same exact but gets me out of a jamb thanks.
by: David05/25/2022
Worked perfectly
by: Bob 09/24/2021
Part arrived in a timely manner and was as advertised. Installed easily and operates as it should. Would recommend Etrailer to anyone as my experience was good.
by: James 07/22/2020
The product was the exact replacement and works well. the delivery time was reasonable. I am completely satisfied.
Comments
It just stopped working. i have to remove it and see what the problem is. I only ues I only used it on 6 occasions
James - 07/23/2021
by: Pam07/18/2021
etrailer information was very good. Shipping was very good. The switch was packaged, installed it and I had lift off, working great. Thanks etrailer.
by: Dean03/23/2022
Great product replacing it was east
25
127
Show More Reviews
See what our Experts say about this JR Products Accessories and Parts
- Replacement Landing Gear Switch for my 2009 Coachmen ChapparelThe RV Landing Gear Switch part # 37213635 is a four prong plug which is common on some RVs . While it is impossible to tell what landing gear is on the trailer other than getting the information off of the gear itself. If your is a four wire plug this will likely replace it.
view full answer... - Is the RV Landing Gear Switch - 12V # 37213635 the Replacement for My 2015 Grand Design ReflectionI spoke to my contact at JR Products and he confirmed the RV Landing Gear Switch # 37213635 as the correct replacement four your 2015 Grand Design Refection Fifth Wheel.
view full answer... - Is the RV Landing Gear Switch - 12V - Black # 37213635 WaterproofI spoke to my contact at JR Products and he said that the RV Landing Gear Switch - 12V - Black # 37213635 is not waterproof. He did give me a different option that is water-resistant and that is the Single Momentary Reversing Switch - On/Off/On - Water Resistant - DPDT - Black # 37213865. He told me that these two switches have the same function and the same layout, but the # 37213865 is not labeled. He also said that while it is water-resistant, if a pool of water collected on it, it...
view full answer... - How Many Terminals Are On the JR Products RV Landing Gear SwitchThe JR Products RV Landing Gear Switch part # 37213635 has four terminals; power, ground, motor in, and motor out. This will be the case for all of our landing gear switches. That said, most likely you have dual landing gear motors and just need to combine the motor in and motor out for each side before attaching to the switch. If you like, you could also just use two switches, one for each jack leg. The Lippert Components 5th Wheel RV Landing Gear Switch part # LC145236 comes with the...
view full answer... - Replacement Stabilizer Switch for Lippert 113407You might be able to use the RV Landing Gear Switch # 37213635, but when I reached out to my contact at Lippert he said that their exact replacement for your Lippert 113407 is the Replacement White Power Switch # LC144214 so I recommend going with the exact replacement from Lippert just to be on the safe side of things.
view full answer...
- Replacement for Atwood 70254 RV Landing Gear SwitchThe # 37213635 JR Products Replacement Landing Gear Switch you'd mentioned would be a proper replacement for your existing Atwood 70254 landing gear switch. If you wanted the switch, wiring harness and the bezel for the switch, use the Stromberg Carlson # LG-145236. I've linked you to product description videos for both switches.
view full answer...
- Available Double Face Plate for JR Products Replacement Landing Gear Switch 37213635The JR Products # 37213635 replacement landing gear switch you'd looked at would install into a 1.3 x 3/4 inch cutout. JR Products does offer a double witch face plate, part # 37212885 but you'd need to use a rotary tool to enlarge its 1-1/8 x 1/2 inch openings to fit the # 37213635 switch, which would be a pretty simple task. The plate is also available in white as part # 37212875. I was surprised that a matching face plate wasn't available, but these are replacement parts and I guess...
view full answer... - Atwood 87701 landing gear switch replacementThe Atwood 87701-SP three-switch panel that you referred to is now obsolete, no longer made, and none in stock. The only wiring information I could find for you is a poor quality drawing from Atwood/Lippert which I have attached. We do not have this part, or similar one, available. The only solution would be to create something using other parts like the Stromberg # LG-145236 or the JR Products # 37213635 switches. If it were me I would omit the center switch (both legs at once) and...
view full answer...
- Recommended Replacement Switch For A Lippert Electric Trailer JackYes, you'll want the RV Landing Gear Switch # 37213635 to replace the damaged switch on your Lippert Electric Trailer Jack # LC285318. The cover has four screws, two on the front and two on the back, that hold the top of motor housing to the bottom.
view full answer... - Landing Gear Replacement Switch in WhiteYou requested JR Products # 37213635 switch with cut out size of 3/4" X 1.300", but in white - not black. That is not available but I have added a new product that is VERY close. You can use JR Products # JR34FR switch, which is the same, except it does not have lettering on it and it is just slightly larger with a cut out of 0.835" x 1.457"
view full answer... - Replacement RV Landing Gear SwitchYes we do sell the up-down switch for the Ram jack head item # EJ-3520-BCV. It is the RV Landing Gear Switch - 12V - Black item # 37213635.
view full answer... - Replacement Switch For The Lippert Power Stance Electric Trailer JackThe replacement switches for the Lippert Power Stance Electric Trailer Jack w/ 7-Way Plug # LC89VR have been discontinued but you could use a universal switch like the JR Products RV Landing Gear Switch # 37213635 in their place. This switch may require a bit of altering to the motor's housing to fit.
view full answer... - Replacement Switch for RV Electric Scissor JacksI may have a solution for you, but I'm unable to find anything that specifically states that it is weather proof. You also may want to consider installing this switch inside one of your trailer's cargo holds, to keep it out of the elements. With that said, you can use the # LC144214 which can be paired with the Replacement White Switch Housing For Lippert Components High-Speed Power Stablizer Jack # LC134025 to provide you with added protection from the elements. I've linked some review...
view full answer... - Manual Crank To Vertical Travel Ratio For The etrailer Landing Gear SetWe went out to the warehouse and tested the Landing Gear Set w/ Handle # RVLG-8HDL and found that it takes 10 full turns of the manual crank to equal one inch of vertical travel. If you'd prefer to motorize this landing gear set down the road you can easily add on the # LC142178 and a switch like # 37213635 to control the motor.
view full answer... - Replacement Switch for Ram Jack # EJ-3520-WBXWe do have a replacement switch for the Ram jack # EJ-3520-WBX with the part # EJ-3520-PSW but the JR switch you referenced would not work.
view full answer...
Do you have a question about this Accessories and Part?
Why etrailer.com?
At etrailer.com we guarantee:Highest quality accessories and parts for the best price.
Our Lowest Price Pledge ensures you will never overpay for the parts you need.Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate accessories and part information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Edited by:
Lindsey S
Installed by:
Kathleen M
Updated by:
Leah S
Updated by:
Julia Z
Written by:
Mike S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-496-5010
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.