Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replaces the master cylinder and push rod assembly for your Dexter Model 10 or Model 20 surge brake actuator. Works with drum brakes.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Jeff: Hello everybody. This is Jeff at etrailer.com. Today, we're going to take a look at this replacement master cylinder and push rod assembly for drum brakes. This fits the model 10 and 20 actuators. Now this will replace the master cylinder and push rod assembly on your Titan model 10 or model 20 surge brake actuator. Basically, this master cylinder holds the brake fluid in the actuator and it connects to the inner slide of the surge brake actuator.
When that surge brake actuator is activated, the inner slide will move towards the master cylinder. The push rod will cause it to apply the hydraulic pressure to your trailer brakes. Now this one here is designed to work with drum brakes. The cylinder bore on this master cylinder is one and one quarter inches and it is made in the USA. But that should do it for the review on the replacement master cylinder and push rod assembly for drum brakes for the model 10 and model 20 actuators..
Direct replacement ut did have to change the brake line adapter because my old mastercylinder was from 2000 and the outlet on anything after 2010 has a smaller outlet.
No fitting for brake line! Wasted time and money to find one.
I paid extra for 2 day shipping it arrived in 4,other than that it was by.
The part matches the old one it was ordered to replace, but it didn't come with the fitting to connect to the brake line. The required fitting is special and specific for disc and drum brakes, with a custom orifice size. There is no mention in the description of the part that you need to buy the fitting separately, or that it is this special one. The only reason I found it was in searching for the thread size on the manufacturer's web site. It didn't even mention the special orifice size there. Someone was complaining about the brakes not working correctly for 10 years before they found that they needed this special fitting. It should be included with the master cylinder
I would give a 5 star but I ordered caps for the hubs with grease fitings. They sent caps without grease fitting. My trailer is designed to pump grease into the caps and grease both inner and outer bearings together.
The customer service was excellent. I am new as to owning a big boat and whats required of the trailer that has to transport it. Their customer service department walked me thru getting the right parts that were needed for my trailer. Which was a complete brake system starting from the Master cylinder,complete brake line kit,and complete trailer brake system.I highly recommend them.And don't hesitate to call their customer service department.They looked up all the right parts for me that were needed for the type of boat trailer that I owned.I will be doing business with this company again in the future.
Arrived a day or two earlier then said. Product was perfect match, still installing. Packaging needs some attention, part of it was sticking through box.. could cause safety cancern with people in shipping and or damage to product. Didn't notice any damage...should have taken photo for better explanation...
I have not installed the master cylinder but packing was not what I would expect. The taping only caught a thin edge of the flap. There was no packing to keep it from banging around during delivery. The inside of the box shows that it took some good hits. Not your responsibility during delivery but, it is your responsibility for the packing.
Every thing was perfect except for the fitting wasn't an inverted flair fitting nor were there any info to give you a clue. It is 3/8" npt so I had to find an adapter.Wish I had that info up front I would have had it inn the first place. But other than that it was an exact fit.
Fit perfect in Dico model 10. Wish I had read more reviews on this and purchased the orifice at the same time
Very happy with all the items. Quick shipping and all appears to be of decent quality.
Master cylinder worked perfect and was delivered within the week
Was the exact part that was advertised and came 4 days early in shipping thank you etrailer.com
The product itself is fine. The shipping, however, is another matter. The product was placed in a box 4 times larger than needed without ANY packing material inside the box. Totally empty!!! The product was allowed to bounce around in the box and punctured several holes in the box. The package was not taped closed sufficiently and arrived with one of the top flaps completely open!! Worst ever packing job!
The order was filled promptly with the correct parts. Would recommend using etrailer.com.
Replaces my old master cylinder just fi ne.
Perfect replacement for my 1989 Ezload trailer
Good replacement. Happy with it
Great service
No packing material around part to protect it, missing boot and rod from box because of a hole in box.
Replacement part easy to install, works as expected. Master cylinder continues to work as expected months after installation. No problems noted with operation or product construction.
Have not installed this part yet, but it appears to match the old one exactly. Arrived in great condition and the quality looks great.
Product description was spot on. Service was great
Fit exactly like origina, no issues, works as it should.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Archie
8/30/2023
Works great