Availability of Replacement Titan Master Cylinder Model 10 or 20 # 2374400

Question

Question:

Brake fluid adapter Code 2374400

asked by: Trevor H

0

Expert Reply:

It sounds like you are looking for a Titan Model 10 or 20 master cylinder replacement based on what you listed which we offer with part # T2374400.

expert reply by: Jameson C

0

Answer 1

Hi David; I honestly wouldn't choose steel brake lines for a salt water application, even if they were stainless. A better option would be the Hydrastar Hydraulic Brake Line Kit #HS496-152 or #HS496-252 with copper-nickel alloy. This has proven…

view full answer...

Answer 2

You can view drum brake surge couplers for 2-5/16-inch balls by clicking on the linked page. Simply click on the filters to select the features you want, such as weight rating, bolt-on versus weld-on installation, and a-frame or straight tongue…

view full answer...

Answer 3

Yes, the Master Cylinder #DX66FR that you referenced is the correct replacement master cylinder for your Model 10 actuator with drum brakes.

view full answer...

Answer 4

We do have the Titan master cylinder replacement part #DX66FR which has the number 23744 stamped on the side of it. See attached picture. A lock out solenoid would attach directly to the back of the master cylinder without an adapter. If you are in…

view full answer...

Answer 5

The Master Cylinder for Titan Actuators - Disc Brakes #T4747100 is 1/2 inch-20 female so you will need the Orifice Connector for Titan Actuators #T1209800 which fits the inverted flare. Replacement Brass Connector for Titan Disc Brake Actuators - Qty…

view full answer...

Answer 6

The correct replacement master cylinder for a Titan Model 10 Brake Actuator is part #DX66FR for drum brakes or part #T4747100 for disc brakes. It is possible that the wrong actuator was installed on the trailer and since the master cylinder is the…

view full answer...

Answer 7

Thanks for the photos of your trailer's actuator! They were very helpful in answering your questions. Based on the photos, it appears that you have a Titan Model 10 Actuator #T1607500. For a Model 10 actuator, the #DX66FR that you referenced is…

view full answer...

Answer 8

Look at the top of the master cylinder and you'll be able to tell which type of brakes it is designed for by the whether there is a yellow dot or not. If you see the yellow dot then you have a disc brake setup. If no yellow dot then drum. Also…

view full answer...

Answer 9

Yes, the Replacement Master Cylinder and Push Rod Assembly for Drum Brakes part #DX66FR fits the DICO Surge-O-Matic Model 10 Surge Brake Actuator.

view full answer...

Answer 10

The difference between a disc brake master cylinder and a drum brake master cylinder is a small check valve that is inside of a drum master cylinder but not present in a disc one. Disc brakes require more pressure than drum brakes so there is no…

view full answer...

Answer 11

I verified that the distance between the mounting holes center to center on the Master Cylinder for Titan Actuators, #DX66FR, is 3-7/16 inches. This master cylinder is designed to fit Models 10 and 20 Titan Actuators with drum brakes. If the holes of…

view full answer...

Answer 12

Yes, the Replacement Solenoid Adapter Fitting for Titan Model 10 Brake Actuators, part #T4750200, is for pre-2000 Titan Model 10 brakes. If you have a newer Titan Model 10 brake, you will use the Orifice Connector for Titan Actuators Item #T1209800.…

view full answer...

Availability of Replacement Titan Master Cylinder Model 10 or 20 # 2374400

Product Page this Question was Asked From

Continue Researching