Replacement Drum Brake Cylinder for a Shorlandr Boat Trailer

Question

Question:

I am looking for hydraulic brake cylinders for my shorelander boat trailer. This is the information I have on it. VIN Number: 1MDB8J521TC841932 Frame/Model: 3X8 TNDM Model Year: 1996 Finish: GALVANIZED Mfg Date: 1996-03-26 00:00:00 Please let me know if you can help me or need more information...Thank you

asked by: Art M

0

Expert Reply:

Thank you for the information on your trailer, it was very helpful. According to Shoreland'r, your trailer came with Dico hydraulic drum brakes. If you are looking for a new master cylinder for your surge brake actuator, then you will want part # DX66FR. If you are looking for replacement wheel cylinder for your drum brake assemblies, then you will want part # BP17-030.

expert reply by: John H

0

Answer 1

The Demco Hydraulic Trailer Brake Actuator part #DM72VR should be a direct replacement for the Atwood 61101 Brake Actuator that you have now. This newest updated it rated at 7K instead of 6K. This is a bolt on option that mounts on 3" centers.…

view full answer...

Answer 2

Hey Aaron, Unfortunately that master cylinder from Attwood is no longer made and cannot be replaced. For that you would need to replace the whole actuator. The closest replacement we carry for that is going to be the Demco #DM72VR brake actuator.…

view full answer...

Answer 3

Thanks for the kind words, happy we were able to help, and the photos are also appreciated! As for the actuator, you are correct that the Atwood 85736 master cylinder is no longer available because Atwood was bought out so your best option is going…

view full answer...

Answer 4

Yes, the Replacement Master Cylinder #T2336100042 is the same size as the master cylinder in the Replacement Master Cylinder Assembly #T4395100. They are the exact same thing in regards to the master cylinder, with the only difference being one is…

view full answer...

Answer 5

The closest option we have to replace your Atwood 82543 actuator is part #DM72VR. However, it doesn't have the lockout like your Atwood does. To add a lockout use #T4748800 but it's an electric lockout unlike the Atwood's manual lockout.…

view full answer...

Answer 6

Since Atwood went out of business none of their actuator (or other product) replacement parts are available unfortunately, so your only real option to having a working actuator is to replace the entire unit. I am attaching a link to our selection of…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 12

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Replacement Drum Brake Cylinder for a Shorlandr Boat Trailer

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching