Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
/
Tow Ready/
Fits 2 Inch Hitch/
Universal Anti-Rattle Lock/
Keyed Unique/
J-PinItem # 63201
Retail:$72.53
Our Price: $32.95
You Save: 55%Orders above $50 qualify for Free Shipping
Tow Ready J-Pin locking anti-rattle device for 2" trailer hitch receivers.
Features:
Tow Ready's exclusive J-Pin ready receiver design allows for the most confident and secure hookup in today's towing market by compressing the hitch mounted accessory against the inner side wall of the hitch receiver tube. Once attached, the hitch and towing components seem virtually welded together.
Tow Ready's J-Pin quickly and confidently secures ball mounts and other hitch mounted accessories, eliminating the sway and rattle caused by necessary part clearance issues.
J-Pin Installed 
J-Pin Installed
J-Pin compatible hitch
Similar to 7651; Replaces 8322
Video of Tow Ready J-Pin Stabilization Pin and Barrel Lockset for 2" Trailer Hitches
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today you're going to be taking a look at the tow ready J-pin stabilization pin and barrel lock set for two-inch trailer hitches. Part number 63201.The typical issue that we may run into when we start putting accessories on our hitch, is we start driving down the road, chances are it's going to start rattling around, making a lot of noise, which can get pretty annoying. That's because there's not going to be anything holding it in place, mainly just keeping it from coming out. So that's where our J-pin stabilization device is going to come into play, because a regular pin is just meant to hold it in place. With our J-pin, we're gonna take the threaded section and go through the hitch pin hole. And then that hook here is gonna go through the secondary hole.
Then we can take the flange nut and we can thread it on to the end of it. We take our included tool, and we're gonna make sure it's nice and snug.I can already see that there's a whole lot less play in there and if I actually shake the ball mount, the whole vehicle's starting to move. Our J-pin also is going to be a locking device. So we can take our key and make sure that section is sticking out, push it all the way in, and push in on the tab. Now our ball mount or whatever other accessory we have will be nice and secure.Our J-pin's not only gonna be good for ball mounts, it's gonna be good for any kind of accessory that doesn't have a threaded hole, and that doesn't have a built in anti-rattle, like our cargo carrier here.I do wanna mention that our J-pin is only gonna work with hitches that have a secondary hole towards the back of the receiver.
They'll have a standard 5/8 pin hole, but then another smaller hole towards the receiver tube; just like we have here in our Draw Tite hitch, and some of the older hidden hitch or Reese hitches.One of the nicest things about our J-pin is the simple design and how easy it is to use. Unlike some other anti-rattle devices, like this one here, we have Let's Go Arrow, but a lot of other companies have this simple design to them. We're gonna have a block and a spring and a threaded hole. The block and spring is gonna go into your accessory so we have to compress the spring and feed the spring and block into the accessory until it lines up with the pinhole on the side. Now as you can see, it can be a little bit of a hassle sometimes, and sometimes it just doesn't wanna cooperate.
And if we have a solid shank, we're not gonna be able to use on of these.Now once you do have the block and spring in place, you would take the threaded bolt, and you insert your accessory into the hitch, and hope that it doesn't fall out. Then go through your pin hole, sliding your threaded bolt through, and you would tighten it down. And once you tighten that bolt down, it's gonna push that block and the spring, which is gonna push the accessory to one side, just like our J-pin. This particular model isn't a locking one, but there are some that are locking, so you do get the best of both worlds, of having an ant-rattle and a locking device.Again, our J-pin is just gonna be a lot easier to use. You're just gonna have to put it into our hitch pinhole, and then thread a nut on and not have to worry about putting something inside of our accessory and hoping that it doesn't fall out when we put it into our receiver.One other benefit our J-pin has over the other style ant-rattle device, is that this is gonna work with solid shanks.
We're not gonna have to put it on the inside of our accessory, and it's gonna work with virtually any accessory whether it's a hollow or solid shank.Our J-pin is gonna come with everything we need to get it in place, including a wrench, two keys, and a dust cover to keep dirt and debris out of the lock zone.Paul H. wrote in saying, "Simple to install, everything needed is included. And now my trailer ball and bar has zero slack. it feels like it is welded straight into my frame. Those rattle and unexpected clunks going down the road are a thing of the past."If you're looking to get rid of that annoying rattle when you're driving down the road from the accessories inside your trailer hitch, our J-pin stabilization device is gonna be doing a great job of that, while being extremely easy to use. And that'll finish up your look as a tow ready J-pin stabilization pin and barrel lock set for two-inch trailer hitches. Part number 63201.
Average Customer Rating: 4.8 out of 5 stars (166 Customer Reviews)
Tow Ready J-Pin locking anti-rattle device for 2" trailer hitch receivers. by: Mark a10/20/2018
I installed it a year ago to prevent the receiver from rattling and it has done that without fail. I haven't ever removed it. 576093
by: Paul S10/07/2017
Work's great on our new hitch, keep's the bike rack from rattling. Thanks etrailer for the great service. 440497
Great product, the only fault is the cap fell off the lock. Wish I could get another one, other than that it is great.
Paul S - 10/07/2018 by: William10/07/2018
The hitch pin make a solid connection for my bike rack. No more wobble as we drive down the road 572344
by: Dennis C09/19/2018
Very good product. Happy with the design and the quality. 566556
by: Jerry H09/14/2018
As promised this product eliminates the rattle in the 2 inch to 1 1/4 inch adapter I installed for my 1 1/4 inch bike rack. However, there is still a pretty noticeable wobble in the bike rack. The bike rack is bolted into the adapter, so the wobble is at the hitch and the adaptor. I plan to try putting some sort of shim between the 2 inch hitch and the 1 1/4 inch adapter. Hopefully, this will eliminate the wobble, which I consider unacceptable. 565200
by: John06/13/2013
Seems like a solid product, but be careful which hitch and bike rack combination you're using it with. For example, I have a hitch that it works with (Hidden Hitch) but it does not work with the bike rack that I use with that hitch (Thule)....so I had to send this pin back. Call eTrailer to check on your specific hitch/rack combination before ordering this. 84426
by: Gene K09/30/2014
Summary: The J-Pin is the best invention since sliced bread! If etrailer were more efficient it would be illegal. 153704
Parked in many motel parking lots with high value electric scooters attached - nothing stolen! The proof is in the pudding.
Gene K - 09/30/2015by: Cory L.03/14/2018
This hitch was installed on my 2015 Subaru Forester 2.5i Limited. The website is fantastic and makes finding the correct products for your vehicle very easy. The hitch arrived in only a few days and came complete with all the necessary installation accessories. The hitch comes with fish wire for the frame bolts so you don't need to fuss with buying fish wire. Some reviews stated that you can go in from the inside of the vehicle but this is totally unnecessary and more work. Just follow the instructions, with exception of the muffler heat shield. You can drill 1/2" holes through the heat shield in the dimpled areas corresponding to where the instructions tell you to cut out the heat shield (see some of the other reviews for more detail on this). These holes allow you to securely fasten the heat shield over the hitch using the hitch bolts. Make sure you have a torque wrench and an 11/16" deep socket to tighten the frame bolts. I would also recommend removing the muffler which is very simple. Lube the muffler mounts with WD-40 to facilitate the removal of the muffler. You will save at least $300 installing this yourself. 485071
by: Danny03/22/2018
I'm really excited about my stabilization pin. We'll be using it for our Reese Explore ProSeries 63153 Rambler cargo basket. I took it out and tested it today after it arrived. There was a fair amount of play between the cargo carrier shank and the receiver when I tugged on it, and the stabilization pin cut that down to pretty much nil. It was easy to install, and I'm excited about the locking feature. Last time we took the carrier on a road trip, I removed it and put it inside our van each night - not wanting it to be stolen. It'll be nice not having that hassle anymore. 487947
by: James12/27/2017
This is an easy to use lock that I thought about returning because I thought it was too much for my needs and I could get by with a cheaper product. I'm glad I didn't do that even though etrailer had processed an RMA for me with no hassles. I've had this for a year and it's stood the test of time and use. I can get it fitted in literally just a few minutes. I've attached the key as well as the keys to my trailer to the included tool which makes my process easier and finding the tool and keys in my trailer bag one simple task. 463100
by: Joe T.11/16/2012
Innovative product. Works well with bike rack which previously rattled and bounced excessively. This appears to tighten everything well. 59536
Works well every time I use it. Very pleased.
Joe T - 05/17/2014by: Ed09/20/2018
Works Great! No rattle in the hitch while driving. Easy to get off after a 1,000-mile pull. 567016
by: Jim E.05/10/2011
This product is great. It completely eliminated the loose hitch problem that caused my bicycles to sway back and forth on their hitch mounted bike rack. What was even better was the help I got from eTrailer.com in showing me what was needed and shipping it quickly. I would never have found this product without your help. Since you had already helped me with my trailer hitch, this time I knew to ask you first. Keep up the good work...I'll be back. 13279
by: Keith04/06/2018
Good solid product. Nice cap over the key slot and O-ring to keep dirt out of the mechanism. One manufacturer issue. This Draw•Tite® J-Pin® Anti-Rattle Pin could not be used on a Draw Tie hitch which was pre-drilled for a J-Pin. The mounting bracket which was part of the hitch got in the way of installing the pin from one direction and from installing the lock from the other direction. 493294
by: Steve08/05/2016
Have only opened the box and not yet had the occasion to use the new trailer J-pin. It appears to be well made and of high quality. Of particular note, it was a pleasure actually opening the package. I had no need to get out the tin-snips or a hand saw or a hunting knife. The package stayed closed until I needed it to open and then popped apart as if it was just waiting for my request. Thank you eTrailer! 280162
Product behaves as promised. Hitch now much quieter.
Steve - 08/17/2017by: Ramsey A04/28/2017
I guess I didn't know if the hitch has two holes is enough reason to buy this product. I liked the quality of it but it just doesn't work for me, at least for now. I needed to secure my Thule Vertex 4 Bike Rack - 1-1/4" and 2" Hitches - Tilting Item # TH9029XT, but now I have to find pay for Thule Snug Tite Hitch Lock and Anti-Rattle Device - THSTL2. The problem is my Bike Rack has already one of the locking mechanism, and I just need the second lock to the hitch, but can't find it here :(. I wish this point was brought up in the video so I knew what I was about to buy. 373677
by: Todd03/23/2017
I purchased the Draw-Tite hidden trailer hitch, Airlift 1000 air springs and tail light wiring kit for my 2017 AWD Sienna. Reviews were correct, the hitch looks great and you should bend the tabs during installation to get it in. I also purchased the wiring kit for trailer lights (pain to install but worth it) and the Airlift 1000 additional load supports that should help with a full load. The air springs were surprisingly easy to install especially when you are already installing the hitch and wiring kit. Recommend doing it all at once (wiring kit first, then hitch, then air lift springs). etrailer has been over the top on customer service. Shipped quick, checked after it arrived and love the website! Already placed another order for more accessories! (get the cargo bag ahead of time with free shipping if you are going to use a cargo hitch) 360094
by: Mark07/06/2018
This is a great, secure locking pin. Holds tight. Easy to use. I hope replacement rubber caps are available. I'll use it for my hitch ball as well as the step unit. 538487
by: MARINE77709/18/2014
These are EXCELLENT- the BEST on the Market and I do HOPE the Manufacture never decides to DROP THEM! IF you pull ANYTHING- this -if put on CORRECTLY will NOT BANG on taking off or Stopping while pulling a Boat or whatever- I think THIS was a GREAT Inovation- without this on my Hummer or SUV you HEAR the Bang Bamg as you take off and Go- they are the BEST!!! 151999
by: Dave T06/27/2017
I would like to tell you about my experience with etrailer.com. I am a return customer because I always find what I need at reasonable prices, quick and inexpensive shipping charges. I ordered this lock for a 1999 GMC Safari to fit my Draw Tite hitch. It is very well made. Fits perfectly and no wobble at all. I highly recommend etrailer.com. I feel they are a very good company to deal with because I get personal service which is uncommon these days. 399525
by: Jeffrey01/03/2018
Class 3 receiver hitch works great on our 2017 Subaru Outback. Perfect fit and the light kit is custom to the vehicle. The install process was easy and the how to video"s at etrailer took all the uncertainty out of the job. Went on just as advertised and I was ready to roll. The hitch blends in with the rear of the Outback and is functional and good looking. Thanks for all the good work making the ordering and installing so easy. 464660
by: Rick k05/05/2014
J-pin works great ! No more rattle pulling my trailer it tightens the receiver good . Lock is nice also, we'll made! 128876
by: RYANPB02/15/2013
Great Product. Came up a little short but added two washers from the hardware store and everything snugged up real tight. No more wobble on my rear step to get into my sprinter van, and it is locked on. Also the wrench was useless in my case, no access at all. I would recommend this product to anybody with a newer hitch (it requires an extra hole) to lock on a step or bike rack, something you aren't going to take off every day. 66412
by: Paul H06/30/2017
Simple to install, everything needed is included. And now my trailer ball and bar has ZERO slack...it feels like it is welded straight into my frame. Those rattles and unexpected clunks going down the road are a thing of the past! Shown being used on a 2017 Subaru Outback (that also has a hitch from etrailer.) 400630
by: Thomas05/21/2018
The Tow Ready J-Pin Stabilization Pin seems to work really well on a DrawTite trailer hitch (also purchased from etrailer) equipped 2015 Subaru Forester using a standard tongue. No tongue rattling when pulling a loaded 4 x 6 foot utility trailer. The barrel lock on the first pin that I received was either jammed in the lock position, or was supplied with the wrong keys. In any case, no problem exchanging after a quick telephone call to etrailer. I received the replacement in a couple of days. No return of the defective pin necessary. As usual, excellent service. 511472
by: Ric E.02/04/2017
Works like a charm, very happy with this product... 338637
by: C Sheppard09/09/2017
Works great. 430383
by: Chad07/01/2013
This was just the ticket to eliminate the annoying rattle and bounce of my hitch as there was a bit of play between the receiver and the hitch. Great product. 87006
by: Paul M.05/04/2013
Haven't use it yet but ordering and shipping was just as described. Website is an excellent source of information on products offered. Thanks 78958
by: Chris W.12/03/2012
Great product! I was excited when I learned it was free with my purchase. It is a little more heavy duty than what I need since I won't be leaving the hitch on all the time, but I can definitely use it on my dads ranch. 60547
by: Ron W.10/08/2012
This stabilizer pin does just what it aims to do for my Draw-Tite hitch (not sure it fits other brands). It made my loosey-goosey bike rack rock-solid tight! It's easy to use, as long as I don't lose the two keys supplied, which I thought was too few (a similar product I recently bought provided 6!). I plan to have some more made, otherwise I would have given it the highest score. 56682
by: Brian N09/07/2016
A product that allows you to tighten the component inserted in the 2 inch receiver to keep it from moving around. A great product. 292213
by: Ron D.12/22/2016
Best of everything, Price, Selection, Availability, Shipping, Information and additional accessories. Ordered hitch and accessories 5 days before xmas with no intention of receiving before Jan 1st. WRONG, had everything on my porch in 3 days, merry xmas to me. Cant say enough about etrailer.com, Don't buy anywhere else. Thank You 328215
by: Bryan01/10/2012
This product is simple, easy to use, and does the job as advertised. I use this product in conjunction with a cargo platform and it eliminates most of the flex/bounce you would have with a standard hitch pin. The lockset is also a nice feature and both the pin and lockset seem to be plenty durable. 29414
by: Kevin S.05/18/2017
Ordered on a Monday and received it the next day. Unbelievable quick service. Also very happy with the hitch. I would definitely recommend this company for your next purchase. 382232
by: Bill06/21/2016
Good product, eliminates a lot of noise. The only downside is the lock cover doesn't weather well, had mine over a year and the "rubber" keyway cover is starting to fail. I would buy another one. 263196
by: Jordan C.12/19/2011
I know nothing about hitches and the like. eTrailer tossed this item in for free for me on my order. After installing my cargo carrier I was really worried that it moved around too much. Turns out that this J-pin Stabilization Pin was exactly what the doctor ordered. If you get a cargo carrier, get this pin. You will not be disappointed. 28273
by: BOB12/03/2016
I RECEIVED THE PRODUCTS SEVERAL DAYS EARLIER THAN PROMISED. INSTALLED IT EASILY THE SAME DAY RECEIVED EVEN THOUGH I AM 74 YEARS YOUNG - I LIKE THE PROVISION FOR UTILIZING THE J-Pin Stabilization Pin and Barrel Lockset for 2" Trailer Hitches - Part #63201 and the welded on tab for utilizing the Pollak 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End - HM40975 - A better setup for the 2017 Jeep Grand Cherokee than the factory tow package and much less expensive as well. 322774
by: Colin04/11/2013
Etrailer is a quality retailer. Every experience has been uneventful, no screw ups, great service and products that meet my picky standards. The J -Pin's design is simple and functional. Got it for my wife's bike rack because it fit sloppy. No plastic, metal on metal. It tightens down the receiver and rack so there's zero play between the two. Thanks again, Colin 75438
by: Millissa06/20/2017
Really liked the product, but not able to use it because we have a nut welded in our hitch. We did not know that when we purchased this item. The tow hatch is great. Very easy to install, took about 45 mins- 1hr. Would like to see e trailers use foam packing around the hatch ends so they don't go through the box during shipping. Thankfully they taped all the items to the hatch so everything was there. 396763
by: David08/16/2018
I love it, honestly have nothing bad to say other than the price is a little high. 554575
by: Chris08/01/2018
I haven't had a chance to haul anything yet but I'm looking forward to trying out this hook style pin and barrel set I bought from these guys I'm sure it's of great quality and works flawlessly 548592
by: Nelson08/05/2018
Great innovation! 550225
by: James07/09/2018
The 63201 J pin fit the DrawTite exactly as it should. This is a good quality product. I would buy this again. 539355
by: Jose07/06/2018
Being using it for a year, is on my car every day and no issues at all, no rust or any malfunction. Great product! 538445
by: Stephen07/06/2018
This is an excellent companion product to the newer receiver hitch platforms that accommodate such a pin that reduces sloppiness in the fit of inserts. The wrench that was included was a big plus and it is easy to stow. 538424
by: Adrian06/21/2018
Works great might get a second for my paranoid self 524916
by: Ritter,06/07/2018
Great device that stoped the little chatter from the hitch 518804
by: Lukas05/23/2018
etrailer is the best place to do anything regarding trailers, hands down! 512655
by: William12/07/2018
works very well 589036
Ask the Experts about this Tow Ready Hitch Locks
Do you have a question about this Hitch Lock?
Do you have a question about this Hitch Lock?
At etrailer.com we guarantee:
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.