Video Transcript for Review of etrailer Trailer Tongue Lock - Latch Lock - Surround Lock - e22GV

Hello, everybody. This is Jeff at etrailer. Today we're gonna take a look at this etrailer hitch receiver lock, surround coupler lock, and latch lock set. Now, this set here is gonna give you complete trailer security that is very easy to use. The kit itself comes in this nice hard plastic case and if you flip open the latches and we open it up, you can see this kit's gonna include a 5/8 inch diameter hitch receiver lock that fits 2-inch hitch receivers. Over here, we're gonna have a 1/4 pin diameter latch-style ball coupler lock, Oops, we'll put that again in the middle right here.

This is gonna be a nice-high visibility silver 2/15. or 2 5/16th inch ball coupler lock. And that all comes here in one kit. Now, what's nice about this kit is they are keyed alike. So all three will use the same key.

It does come with total of two keys, so keeps you from fumbling through a key ring or guessing which one's gonna fit. Now, the nice bright finish on these locks will stand out as a clear theft deterrent. Makes it easy to see your trailer is locked while the one-key system keeps the routine fast and simple. And you can see on these two locks, they're a nice chrome finish that you'll be able to notice. And on this one, you can see is a nice silver powder coat finish.

And those finishes do help resist corrosion. And the covered keyways on these will help keep locks to working smoothly. Now, as you can see, they snap into place so the case keeps every lock and the keys in one place so you're not digging through your truck or leaving a piece behind. And also when you close it, latch it in place, this will easily fit in your cab, your toolbox or your truck bed, keeps all your gear in nice one spot. And then when it's time to hitch up or park for the night, all you have to do is unlatch it, open it up, and you can see everything's right where it should be.

Now, the locks themselves, they're pretty easy to use. We mentioned has the cover on it, nice rubber cap. Pop open the cover, get one of your keys, stick it right in there. And then to remove the lock, you just start unscrewing it like you would a bolt. And once you get it far enough, comes right off and you slide that through the hole, put your lock on the other side, line it up, and then start twisting the key. Get it lined up there, and then start twisting it until it's like you're twisting down a bolt. Once it gets tight, back it off a little bit and then your key will come right out, put your cover on and it's secured, ready to go. This one's the same way, operates the same way, has the cover on it, put the key in there, unscrew it. And then this one here, the surround coupler lock. This is the fit on your coupler itself. Has the lock here, it has a pin. You can see it's locked right now, so it's not gonna move. So when this is installed, it's gonna keep anybody from attaching to your ball coupler. But to unlock it, just put your key in there. Once the key's in there, just turn it a quarter of a turn, you can see, and it releases that pin. And now you can slide this onto your coupler. Once it slides on, you just push the pin up, take the key, turn it back to quarter of return, and it keeps that pin locked into place. So they're all the locks are very simple to operate. Now the product page on this product does offer many specs on all three of the locks of the dimensions you might need to make sure if it'll work for your application. Now, if you do have any other additional questions regarding this part or any other item that we carry, please feel free to reach out to us so it can help you get all of your questions answered for you. But that is gonna do it for a look at this etrailer hitch receiver lock, surround coupler lock, and latch lock set.