Buyers Products Class 5 Service Body Hitch Receiver - 2"

See what our Experts say about this Buyers Products Heavy Duty Receiver Hitch

• Recommended Trailer Hitch For 2015 Jayco Greyhawk 31DS That Has Capacity Over 5,000lbs
  There are trailer hitches rated above 5,000lbs that you can have installed on your 2015 Jayco Greyhawk 31DS, but they all are going to require welding to get that additional capacity. While I know you were hoping for a bolt on receiver, you'll need to go with one such as the Buyers Products # 3371801050 and have a certified welder weld it on for you. Keep in mind that even though this hitch has a 16,000lb trailer weight rating that doesn't mean your motorhome does. You'll need to reach...
  view full answer...
• Trailer Hitch Recommendation for a 1991 Dodge W350
  Since your 1991 Dodge W350 has a flat bed I recommend using a universal hitch that gets welded to the frame: - Buyers Products Class 5 Service Body Hitch Receiver # 3371801050 This gives you a 2" hitch receiver and has 9" mounting plates that can be adjusted along the crosstube to fit varying frame widths. Since flat bed trucks have a different setup than a standard truck bed style it's better to go with a universal style like this than trying to make a standard hitch with fixed brackets fit.
  view full answer...
• Dimensions of Buyers Products Service Body Hitch Receiver # 3371801050
  The overall width of the main cross tube on the Buyers Products Class 5 Service Body Hitch Receiver # 3371801050, is 44 inches. The square cross tube is 3 inches by 3 inches, and the weld on brackets are 9-1/2 inches tall by 9 inches wide. Check out the video I attached at the bottom of the page that goes over all these dimensions and other details of this hitch.
  view full answer...
  
• Could Buyers Products Class 5 Hitch # 3371801050L Install with Mounting Brackets Horizontal
  The Buyers Products Class 5 Service Body Hitch Receiver # 3371801050L that you referenced was intended to have the mounting brackets installed vertically. That said, this is a multi-fit semi-fabricated hitch solution for vehicles so there is some leeway in getting creative with how it installs. If you wanted to switch the position of the mounting brackets you'd be fine most likely but we couldn't guarantee you'd get the full towing capacity of the hitch.
  view full answer...
• Hitch Crosstube That Can Be Fabricated to F-450 Dump Truck
  Best option we have would be a service body cross tube part # 41990 like you mentioned and then having plates or fabricated like you mentioned.
  view full answer...
• How Wide Is The Cross tube Of Buyers Products Class 5 Service Body Hitch 3371801050L
  I contacted Buyers Products and the Buyers Products Class 5 Service Body Hitch part # 3371801050L is 44 inches wide with 18-5/16" tall mounting plates. It is a weld on hitch that is normally used on service body vehicles that are 34 to 37 inches wide. The Buyers Products 2" Platform Body Hitch Receiver 62" Long with 18.29 " Mounting Plates part # 3371801051L is 62" wide if you need a wider hitch for your frame.
  view full answer...
• Class V Trailer Hitch Options for 2005 Dodge Ram 3500
  If your 2005 Ram 3500 has a service body on it then yes the Buyers Products Class 5 Service Body Hitch Receiver # 3371801050L would be your best option for a trailer hitch but you should not it is a multi-fit style hitch which means it will take some fabrication to install. If your truck has a standard bed on it we have better options that are custom fit like the Draw Tite part # 65046 which fits if you have the factory hitch or the Curt # C15809 which fits if you are without the factory...
  view full answer...
• Recommended Trailer Hitch for 2012 Ford E-350 with Service Body
  Since your 2012 Ford E-350 has a service body your best option for a hitch is with a weld-on unit like the Buyers Products Class 5 # 3371801050L. This particular unit includes the necessary mounting plates and has more than enough capacity for whatever the E-350 itself can handle. Because of the modifications at the rear that a service body design requires, a standard custom (bolt-on) hitch won't be compatible. Another good option, depending on how long the service body extends rearward,...
  view full answer...
• Recommended Trailer Hitch for School Bus on 2005 Chevy Express 3500 Van Cutaway Chassis
  Your 2005 Chevy Express 3500 left the factory across the street from our facility as a Van cutaway chassis and was delivered to an upfitter that installed the bus body onto it and joined it with the cab portion of the van. Because there are many different upfitters, we have no way of knowing how the rear bumper is situated in regard to the frame, so it's very likely that the hitch that fits the passenger or cargo van models wouldn't be a fit, as their bumpers don't hang as low. We might...
  view full answer...
• Recommended Trailer Hitch Receiver and Weight Distribution System for 2007 HS M30SFS and Trailer
  For your 2007 HS ADMIRAL SVE, your Hidden Hitch receiver sounds like it is capable of towing your trailer. The rated 5,000 lb capacity is without weight distribution, but from my research it is rated for 6,000 lbs with weight distribution just like the Curt # C13701. If you are needing a weight distribution system for this hitch receiver you likely will need a system rated for 15% of your total trailer weight. That puts you around 540 lbs roughly. You want a system that falls in the...
  view full answer...
  
• Hitch for 2005 GMC C5500 Topkick with Tommy Lift
  The # TLF1003-30 hitch you're asking about is designed for a 1999-2016 Ford F350, F450 or F550 chassis/cab and wouldn't fit your Topkick. For your truck, you'd need a multi fit hitch for heavy duty trucks as none of our vendors offer a custom made fit. In order to choose the correct one, you'll need to know the needed drop, height difference between the rear bumper and the underside of the Tommy Lift. If these heights are even, use the # 3371801050 from Buyer's Products. For a 3 inch...
  view full answer...

Do you have a question about this Heavy Duty Receiver Hitch?