Tray holds your generator and slides out, making it easy to grab your generator or top it off with gas without having to crawl into a cramped cargo compartment. Straps stop the generator from sliding around while traveling to the campsite.
Features:
Specs:
Note: Do not run your generator while it's sitting on this tray.
Need a way to easily top off your generator with gas during your next off-the-grid camping trip? This tray slides out of your RV for quick access to your generator so you don't have to crawl into your cluttered or cramped cargo compartment. When you need to add gas, pull the knob up and slide the tray all the way out. When you're finished, push the tray all the way back in until it's stowed away. The safety latch locks the tray in place, so it won't slide out while you're traveling to the next campsite. And to make sure your generator doesn't get banged up while you're traveling down the road, tighten the 2 included adjustable straps over it and secure them to the integrated slots on the tray.
This preassembled tray installs inside the storage compartment of your RV or motorhome. Making sure there's adequate clearance of the compartment door, bolt the tray down onto the compartment floor using the pre-drilled holes. Mounting hardware is not included.
Average Customer Rating: 4.6 out of 5 stars (43 Customer Reviews)
Tray holds your generator and slides out, making it easy to grab your generator or top it off with gas without having to crawl into a cramped cargo compartment. Straps stop the generator from sliding around while traveling to the campsite.Thanks for keeping my informed as to my order status. I received the MORryde RV Generator Slide Out Tray - 25-3/4" x 26-1/4" in perfect condition. The weight of the item is 52 lbs. and is well built. It will be perfect for my Portable Onan 4500i Generator, which ways about 100 lbs. I haven't installed the tray yet, but it will work out perfect in the rear storage compartment on my 5th Wheel Trailer.
Awesome tray
We have a Northwood Arctic Fox 27.5L 5th wheel
We have a Honda 3000 Gen Set that we use periodically so we wanted it easy to use or remove when we don’t anticipate using it. This tray was easy to install. We cut a hole in the base of the storage area to allow better air flow & ventilation for gas fumes and exhaust air movement
Reminder there is no hardware so you have to pick up carriage head bolts and hardware to install
Fit just where I needed it to. Putting my Blackstone 22" grill on it for my RV. Now I just open storage area door, slide it out, plug into gas outlet just 3 feet away, start grilling. I'll be back with pics.
Overall condition of tray was received good… the slide of the tray is not as smooth as I would have liked… after putting on a little silicone spray is appears to be better.
Also, there was no mounting hardware included in the package… had to use my own bolts & nuts to secure to my bay floor.
Good stable platform for our generator, all night thing I would like to see a lock when it’s fully extended. We run our generator fully extended out keeping it cool and quiet.
They tray itself is ok, literally comes with zero instructions, mounting hardware, or even any direction as to what size is needed. Called customer support who also had no idea, also there's no way to lock it in the out postion to prevent it from sliding back in if even kn the slightest hill or incline. So my generator just slides back in all by itself. It seems well built otherwise which is why it get just an average rating.
The slide tray works perfect, smooth operation, easy installation, carries the weight of a Honda EU 7000 with no problems. I wish I had purchased sooner.
Dealing with Etrailer is great
I think there needs to be a way to remove the tray with out taking the rivets out, I did and it made it easier to work with because of where it was going. It’s in the battery compartment in front of my 5th wheel a drop of 10 inches.
The tray came quickly and is a very well built one. Was easy to install into the front of our fifth wheel for generator.
This fit perfectly and a thank you to Marissa for going over specs of unit to verify it would fit my unit.
Works well and does what i need it to do with ease.
well made, fits my generator and I'm able to pull it away from RV body. I have it mounted externally on a frame added to the back of my 5th wheel
Haven't installed yet, but looks to be a great product and I'm excited to use it!
GOT THE ORDER VERY QUICK AND A GREAT DE AL
Review from a similar Generator Tray in RV Cargo Slides
I must admit that I was PO'd when the tray arrived as the box had a different part number and different dimensions listed on it as opposed to those on etrailer's site. The issue was solved by Montrel M at etrailer via phone even though I had previously sent 3 emails. Within an hour all was settled. My apologies. As for the tray it looks great and is made well. I'm sure it will work fine. Now, can etrailer put the Mfg part number under their own part number for clarification if necessary.
Review from a similar Generator Tray in RV Cargo Slides
They tray works well for my application. I got lucky on the size, if it was any bigger than 15-3/4” deep it wouldn’t have fit the compartment.
I had to mount it on wooden blocks so the slides would clear the front lip of the box. Great deal for the money compared to fabricating a sliding tray from scratch. It has no latch to lock the slide in the out position however so I’ll have to come up with a simple way to do that.
Do you have a question about this RV Cargo Slide?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.