Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Transform your vehicle's 7-way round-pin receptacle into a versatile hub for towing trailers with RV-style 7-way blade plugs. With this adapter, seamlessly connect ground, left turn, right turn, and stop circuits, ensuring that your vehicle and trailer communicate effectively. It's a perfect solution for anyone with a 7-way blade plug trailer looking to enhance compatibility without the need for rewiring.
Keep your connections clean and dry with the adapter's spring-loaded, hinged door that shields the interior from dirt and moisture. The plug, made of glass-filled nylon, and the socket, crafted from high-impact ABS thermoplastic, are built to last. Whether you’re driving through rain or shine, this adapter is designed to withstand the elements and maintain a strong connection.
Round, floating, solid brass pins reduce voltage drop and align effortlessly for maximum contact. Designed to ensure reliable electrical performance, these pins help maintain consistent power flow to your trailer's lights and systems, giving you peace of mind during your towing ventures.
Adapt with precision using the detailed wire setup: White for ground return, Black for clearance, Yellow for left turn and hazard, Red for stop lights, Green for right turn and hazard, Brown for tail light arrangements, and Blue for auxiliary circuits. Note: not compatible with 7-round plug systems that separate brake and turn signal wires, offering specific solutions for particular setups.
Whether you're towing with an older model truck, a tractor, or something else entirely, this adapter is versatile enough to fit different vehicle configurations securely. Use it to connect your truck or tractor to a trailer seamlessly without having to change the existing setup. You’ll find this adapter especially handy when switching between different towing vehicles.
If your 7-round plug is wired separately (brake light and turn signals on different wires), this adapter won't work.
like product,exactly what i was looking for
I could not find this anywhere else. Happy so far
I received this item in a plastic bag, for a few moments i wondered if it was a knock-off. I had done my home work and was sure that this item would be compatible with the socket on my John Deere 2013 5085M at the time I ordered it, not so. The 'holding ridge' at the plug-in end was not in the right position when fully inserted into the plug on the tractor. I sent multiple pictures to Pollack Technical Support but they were unable to assist me. I finally modified the item myself (something I really hate to do) so that it would fit the plug-in and be 'grasped' by the cover/holder on the tractor side. As I anticipated, the thickness of the plastic was inadequate to make the adaptation 'sweet', so I had to cover the resulting hole with silicone caulk.
I will call to arrange a return of this worthless item
Little disappointed in the tubing on the wires, thought it would be molded. But, I'll heat sink it.
Perfect adapter for pulling a hayride t railer!
Got it just when it said it would be here. The 7 into 7 plug that was ordered is already on the truck an trailer. Thanks Guys.
Well put together
This is a great solution for adapting RV blade connector to 6 pole connector. I give it 5 stars. I use this for work purposes, and have found one issue that I DON'T believe to be manufacturer defect. In my industry we use different trucks and trailers daily, if not hourly. Some trailer electric brakes will lock up when adapter is connected. I have found the red wire in the adapter to be the problem. My solution was to splice in a switch so that when the intermittent problem arises I can flip the switch and be on my way.
Rachael H.
6/23/2018
Thanks for the information Charles, I did want to let you know that there are two differnet wiring configurations for these 6-way connectors. Sometimes the red wire that you noted as the brake connector point can also be pinned as the 12V power wire. This would then activate the brakes, as you noticed. Your solution while it worked for your application is not something that we generally recommend for our customer in case they forget to flip the switch and are then towing without brakes on their trailer. For that instance we recommend repinning the connector and changing the 12V and Brake pins to correspond to the correct functions.
Helpful Links
This item is high quality but the real "value" here is the outstanding customer service that etrailer provided. The 7 pin round plug provided didn't fit my 7 pin round socket and they went out of the way to research the difference in my socket and their plug. Great company.
Eddie
2/27/2014
I still like it fine but I dont use it much.
Great company
seemed to be a good product , the only problem was going from 7 pin round semi connector to 7 pin rv style the trailer brake circuit did not line up , some rewiring was required so it would work with the brake controller ( if i would have i checked your website i would have known it sooner , no problem figured it out ) used truck and trailer alot since , no problems so far
We are so glad we found etrailer.com! We have never ordered an incorrect part because their info - and large bank of Q&As - has always told us everything we needed to know. I wanted to share our experience with the Pollack 7-way blade to 7-way round connector, part PK12-724. When researching for the correct part, we found a question from a buyer who had the same/similar vehicle, a 1993 Ford F-150 with a factory tow package. He was told to buy the PK12-724 but to cut the red and blue wires and cross-connect them. (This was info we we so glad to have!)
We did so, and most everything worked except the trailer back-up lights came on whenever the lights were turned on. We mentioned it at the RV place when we were there, and they checked it for us. Turns out that not only did we have that issue, but our trailer battery was not charging when hooked up and truck running. So on the blade end of the connector, they moved some of the wires around (see included illustration), and voila, everything now works correctly! I hope this is helpful to others. I believe the truck information is the most important info for this fix, but FYI our Trailer is a 1994 Komfort 27.
This is a well made item and it worked perfectly on my 1933 ford truck !
My trailer connector works great. Because I live a ways from town it was great to order it online and have it shipped. It arrived quickly. One note: When I was in town I did see the same connector at NAPA for the same price. All things considered, I'm happy with my purchase and would order from etrailer again.
The adapter harness eliminated time & grief to replace/re-wire the commercial style plug on a farm tractor, allowing use of tail, turn, and brake lights on trailers with blade type connector. Works great.
Exactly what I needed to hook a conventional trailer to our new bucket truck without cutting the wiring up to get rid of the rare 7 pin socket.
Product was exactly as described, and fit the unique need to convert the 7 pole to 7 blade trailer light system. This saved rewiring the vehicle and/or trailer.
This particular adaptor was not available locally and we needed one on very short notice. The staff at etrailer made sure the product was shipped overnight so we could depart as planned the following day. While many promise good service it would appear etrailer actually has product in stock and works at getting it delivered on time, a combination that is not so common these days.
Thanks
Have a '79 Dodge with the older style 7 round pin Pollack connector and bought a new camp trailer with the 7 pin spade connector...needed an adaptor. Their PK12-724 was the perfect fit! Well built, and works perfectly! Etrailer.com has fast order processing too. Very satisfied with the product, price & service!
The 14 inch extension 7 prong pigtail arrived very quickly as described. This is going to work perfect as I need the power cord from the trailer to the truck to be less than a foot longer to make the connection. Thanks for the really quick delivery on the perfect fix!! It appears to be very well built.
Marco
This converter plug and light tester is exactly what we needed for demands of the studio industry that we work in. Allows us to quickly check the trailer light system of our trucks and get them working.
Thanks for a great product.
okay product. Still had to do some wire switching to make it work on an airstream.
Tom 
8/28/2017
it works fine after finding the wiring problems
It worked as expected but he male round plug bottomed out in my tractor and would not engage the latch on the lid to hold it in. Had to sip tie it in place. I have other 7 pin round plugs which work fine but this one seems longer than the others.
All of our trucks come wired with round pole trailer plug and some of our trailers take 7 spade style this adapter solves our problem and is cheaper than buying the parts and making them our selves.
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Brooke M.
11/20/2024
Hey, Timothy! Whats going on with the adapter? Maybe I can help you before you return it.