To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
With a 6,000-lb maximum gross trailer weight and 600-lb maximum tongue weight, this Class III hitch is built for everyday towing and hauling jobs. The 2" receiver opening gives you the versatility to connect bike racks, cargo carriers, ball mounts, or small trailers without the need for adapters. Whether you’re pulling a camper or loading up a cargo basket, this hitch gives you the strength and stability you want for light to moderate towing.
You don’t need a lift or fancy tools to get this hitch installed. It bolts directly to the frame using the included hardware—no welding, drilling, or modification needed. Just remove the plastic cap on the bumper, line up the hitch, and secure it with standard tools. The design makes it one of the easiest hitches to install on your own in a driveway or garage.
The hitch is constructed from fully welded steel for dependable strength. Curt’s precision robotic welding helps ensure solid joints and consistent alignment across the entire assembly. A gloss black powder coat finish over a protective base coat adds corrosion resistance that holds up against road salt and moisture. It’s sturdy enough for regular use and keeps its clean look after miles of towing.
Once installed, the receiver lines up flush with the bumper for a simple, low-profile appearance. There’s no bulky crossbar hanging below, just a neat 2" opening ready for your accessories. It looks like it belongs there—solid, functional, and unobtrusive.
Customer Satisfaction Score:
90% were satisfied with this product
10% of customers were not satisfied
Ratings & Reviews
Works good, super easy to install.
Perfect fit for my 2019 Ram and easy to install. Exactly what I needed.
Good product installation simple. For those with a sport bumper with no plug and hole. Remove the rear bumper and everything else is the same. The reinstall. Approximately 45 minute job
10/10 easy install, looks good and works great.
Needed to buy impact driver to mount. Fits truck good but not as easy to install as video shows.
It fit like a glove on my 2020 Ram Bighorn. The only problem is that I did not have a torque wrench available that would torque at the recommended setting of over XXX pounds for the two 3/4" bolts. But I used an impact wrench and I'm sure they will not loosen up. Great product and I do recommend it.
Super easy installation. Looks great, functions as intended. Would definitely recommend if you have the reinforced bumper hitch but would prefer a receiver
The part fits perfectly. Very easy to install. The only set back , is having a torque wrench to torque the 1/2 inch bolt to 320 ft pounds at home . But, I do have one I can use at work. Problem solved .
They had the best price for the trailer hitch receiver, it was shipped on time and installation instructions were clear. Everything was perfect, would definitely use them again.
Works awesome hard a full size truck on a 24'car hauler
Wayne
10/9/2025
Still working great, I highly recommend it.
I am very pleased with my hitch/receiver I ordered for my 2021 Ram Bighorn.Went on with a perfect fit.I will definitely order from etrailer again.
This product fit my 2021 RAM 1500 perfectly and has performed flawlessly over the last year.
Great product, took 10 minutes to install,perfect fit
Shipped in a timely manner and getting ready to install!! Can’t wait to put it to use! Thank you all!
Great product. Fits perfect
Arrived on time excellent quality super easy install
Works great
Excellent fit, and exceptional customer service
Quick and easy install. Autozone had a 3/4 drive torque wrench big enough for the 320 ft lb bolt. Purchased a 1/2" hex from [online vendor].
Fantastic kit. I've moved across country with it and used it during DIY projects.
The on—line installation video was much more helpful than the written directions. Locating a torque wrench that goes to 320lb was a bit of a problem, but thanks to a local repair shop I got it done.
Looks great just wish K could use my 3 ball hitch.
It bottoms out before can get the cross pin In there
What a great product and easy to install, easy instructions. I loved the way it looks on my Ram 1500
I had quite a bit more on the trailer than what the picture shows (while I know it’s not a ton of weight). But either way. Install took a total of MAYBE 10 minutes? Was really easy to do and didnt have one issue out of it. Would highly recommend instead of using stock bumper hitch.
Kate F.
10/29/2025
I wish every car would take this style of hitch Luke, cut that install time down for all! How did the rest of the move go? Same town, or big changes?
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Mike L.
12/16/2025
That's awesome Chad, we're glad your install went well! Good job, sir!