Will The Curt Trailer Hitch Receiver # C13419 Fit A 2024 Ram 1500 Tradesman 4x2

Question

Question:

I HAVE A RAM 1500 TRADEMEN 4X2 WITH 8 FT BED 3.6L THE CROSS member HAS I HOLE FOR THE C13419 TO CONNECT TO WILL IT WORK OR WILL I HAVE TO DRILL OTHER HOLE

asked by: Larry

0

Expert Reply:

Hey Larry,

The Curt Trailer Hitch Receiver # C13419 requires the class III tow bumper from Ram that would have a mounting bracket sitting in the middle that you would run two bolts through. The # C13419 does not require drilling to install. Would you want to send me some pictures of your setup and I can take a look?

expert reply by: Kevin C

0

Lazer S.

1/12/2026

Hey Larry, how did things go with the Curt trailer hitch on your Ram 1500? Did it line up with the existing hole in your crossmember as expected? Your update could make it easier for the next person working on the same setup.

Larry

1/12/2026

@LazerS I used a floor Jack and two tie downs to hold it in place everything else lined up it was easy to install

Lazer S.

1/14/2026

@Larry Using tie downs is a great idea! I can't say I have heard anyone else do that before. What are you using the hitch for?

Answer 1

I can understand why you'd think that the Curt Trailer Hitch Receiver #C13419 wouldn't be as solid and sturdy. However, the hitch receiver is designed to bolt up to your bumper beam, which is then bolted to your truck's frame on both…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 5

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 6

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 7

Hey Mike, welcome back! Thanks for all of the info you listed from your Grand Design. Based on that and fact you have 5,200 lb axles the correct bearing kit would be the part #BK3-300 which comes with the correct bearings, races, seal, and a cotter…

view full answer...

Answer 8

Hey Joseph, thanks for reaching out. The difference between the yellow and black SumoSprings is the weight capacity or stiffness of the spring. For the 2018 Ram ProMaster 1500, the black ones part #SSR-307-47 are 1,500 lb capacity. Those are good for…

view full answer...

Answer 9

Hey Steve, thanks for reaching out. You can indeed use the Weigh Safe Ball Mount w/ Built-In Scale #WS56KR as a tongue weight scale, then go back to your Equalizer hitch for actual towing. That's a pretty good idea honestly, as long as your…

view full answer...

Answer 10

Hey Stan, thanks for reaching out. The correct replacement air bag for your 5813 bag is Air Lift part #AL50201. This is the only air bag we can guarantee fits, but unfortunately, we no longer carry it. It looks like Air Lift still carries it though,…

view full answer...

Answer 11

Hey Rex! Those are some great questions. A weight distribution hitch (WDH) isn't always needed but in your case you will want one. Typically if the weight of your trailer is more than 50% of the weight of your vehicle it is a good idea to use a…

view full answer...

Will The Curt Trailer Hitch Receiver # C13419 Fit A 2024 Ram 1500 Tradesman 4x2

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching