Availability Of Replacement Hardware For Curt Trailer Hitch C13419

Question

Question:

Looking for hardware kit for C13419.

asked by: Matt

0

Expert Reply:

The correct hardware kit for the Curt Trailer Hitch Receiver # C13419 you mentioned is the # RHK.

You will just need to enter 13419 as the hitch item number and then select Curt from the drop down menu.

I included a video of the # RHK for you to take a look at.

expert reply by: Samuel C

0

Shawn

3/22/2026

Does the hardware kit come with the dbl nut plate

Robin H.

3/23/2026

@Shawn you will have to get the weldment assembly directly from Curt.

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 4

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 5

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Answer 6

Good morning Brett, Yes, the Curt Spectrum Brake Controller w/ Custom Harness - Dash Mounted Knob #C28SV and the Curt Echo Under-Dash Bluetooth Brake Controller w/ Custom Harness #C46GV will both work just fine in your 2026 Ram 1500 Rebel. They are…

view full answer...

Answer 7

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Answer 8

Hey Jeff, thanks for reaching out. Yes, the Curt Echo Wireless Brake Controller #C51180 will absolutely work on your 2026 Ram 1500 Rebel. As long as it has the factory 7-way, the echo unit will work just fine. I'm not 100% sure why we don't…

view full answer...

Answer 9

You're right, the mounting bracket is unique (in a good way) for the Curt TriFlex NEXT Trailer Brake Controller #C24VV. The bracket is smaller and all you do is put the included adhesive tape on the bracket and stick it wherever you like under…

view full answer...

Answer 10

Hi there Chris, great question. Yes the Redarc #RED87CR is truly a plug and play brake controller for your 2026 Ram 1500. It connects directly to the factory tow controller connector under the dash, so there’s no dealer programming required like you…

view full answer...

Answer 11

Hey Steve, yes the Hellwig sway bar part #HE56TR does fit your 2023 Ram 1500 Quad Cab 4WD. The only model it doesn't fit is the TRX models. Hows the handling of the truck currently?

view full answer...

Answer 12

Hey Brian, the correct Timbren kit for a 2023 Ram 1500 4x4 is the part #TDR1500DS.

view full answer...

Availability Of Replacement Hardware For Curt Trailer Hitch C13419

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching