Wheel Masters 4-Hose Inflation Kit - 16", 16-1/2", 19-1/2" Dually - Wheel Cover Mount

Wheel Masters Tire Inflator - WM8008

Rubber hoses take the hassle out of inflating and checking the air pressure of dual tires. Kit is designed for steel wheels with wheel covers. Hardware included.

Features:

• Inflation kit lets you easily check air pressure and inflate your vehicle's dually tires
  • Relocates inner tire's valve stem to outer wheel and extends valve stem on outer tire
  • No crawling on the ground or reaching for valve stem on inner tire
• 2-Ply rubber tubing with nylon braiding
• Simple wheel-cover-mount installation with included hardware
  • Hoses attach to valve stems on inner and outer tires
  • Brackets clamp to sides of wheel covers
    • Brackets clamp to sides of rear wheels before wheel covers are installed
• 4 Hoses for dually tires and (2) 45-degree valve extenders for front tires included
• Made in the USA

Specs:

• Application: inner and outer tires on 16", 16-1/2" and 19-1/2" dual wheels
• 1-Year warranty

Checking and maintaining proper tire pressure is important for ensuring a safe, smooth ride and maximizing fuel economy, but it can be a real pain with dually tires. The Wheel Masters inflation kit takes the hassle out of checking air pressure and inflating your dual tires.

Two hoses extend the valve stem location of the inner tires to the outer wheels. This means no more crawling around on the ground or blindly reaching for the valve stem on the inner tire. Two 90-degree hoses are also included to make it easier to access the valve stems of the outer tires.

The kit also includes two 45-degree-angled valve extenders to make checking and airing up your front tires even easier.

Wheel-Cover-Mount Installation

The dually inflation kit easily mounts to the rear wheel covers on your truck. Mount the brackets and hoses of the inflation kit to your vehicle's rear wheels before installing the wheel covers.

1. Clip 2 of the included brackets to each rear wheel cover. Clip the brackets to each rear wheel. Be sure to align the brackets with the valve stem and a hand hole.
2. Attach the hoses with straight valve extenders to the valve stems on the inner tires.
3. Attach the hoses with 90-degree-angled extenders to the valve stems on the outer tires.
4. Run the hoses to the outer wheels and attach the hoses to the wheel cover brackets.
5. Screw on the valve caps.

8008 Dual Tire Inflators by WheelMasters - 16", 16.5", 19.5" Dual Wheels - 4 Hoses - Wheel Cover Mount - Rubber