bing tracking image
Customer Service My Orders
  1. E Track
  2. CargoSmart
  3. E Track Wheel Chocks
CargoSmart Motorcycle Wheel Chock for E Track or X Track Systems - 7" Wide Tires
Add to Cart
etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
SCHEDULE AN INSTALLATION
go
CargoSmart

CargoSmart Motorcycle Wheel Chock for E Track or X Track Systems - 7" Wide Tires

Part Number: 3481731
144 Reviews | 27 Questions
In Stock
$43.93
Retail:$49.00
You Save: 10%
 E Track
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

3d view icon
cargosmart e track wheel chocks motorcycle chock for or x systems - 7 inch wide tires
cargosmart e track
cargosmart e track wheel chocks motorcycle chock for or x systems - 7 inch wide tires
cargosmart e track wheel chocks
cargosmart e track wheel chocks
cargosmart e track wheel chocks
cargosmart e track wheel chocks 3481731
cargosmart e track 3481731
cargosmart e track 3481731

Show All (10) Product Images

Show Fewer Product Images

In Use/Installed

0 e track cargosmart wheel chocks motorcycle chock for or x systems - 7 inch wide tires
0 e track cargosmart wheel chocks motorcycle chock for or x systems - 7 inch wide tires
0 e track cargosmart 3481731
0 e track cargosmart wheel chocks in use
0 e track cargosmart wheel chocks in use
0 e track cargosmart wheel chocks motorcycle chock for or x systems - 7 inch wide tires
0 e track cargosmart wheel chocks 3481731
0 e track cargosmart wheel chocks motorcycle chock for or x systems - 7 inch wide tires
0 e track cargosmart 3481731
0 e track cargosmart in use
0 e track cargosmart wheel chocks motorcycle chock for or x systems - 7 inch wide tires
0 e track cargosmart in use
0 e track cargosmart wheel chocks in use

Show All (13) In Use/Installed

Show Fewer In Use/Installed

Customer Photos

CargoSmart Motorcycle Wheel Chock for E Track or X Track Systems - 7" Wide Tires customer photo
CargoSmart Motorcycle Wheel Chock for E Track or X Track Systems - 7" Wide Tires customer photo
CargoSmart Motorcycle Wheel Chock for E Track or X Track Systems - 7" Wide Tires customer photo
CargoSmart Motorcycle Wheel Chock for E Track or X Track Systems - 7" Wide Tires customer photo
CargoSmart Motorcycle Wheel Chock for E Track or X Track Systems - 7" Wide Tires customer photo
CargoSmart Motorcycle Wheel Chock for E Track or X Track Systems - 7" Wide Tires customer photo
CargoSmart Motorcycle Wheel Chock for E Track or X Track Systems - 7" Wide Tires customer photo

Show All (7) Customer Images

Show Fewer Customer Images

Videos

Show All (3) Videos

Show Fewer Videos

etrailer Installation
We'll connect you with nearby partnered installers who know this exact setup.
SCHEDULE AN INSTALLATION
go
This wheel chock snaps into your floor-mounted E track or X track so you can stabilize your motorcycle on your trailer. Secure the wheel with a tie-down strap (sold separately). Steel construction is strong and corrosion resistant. 1-800-940-8924 to order CargoSmart e track part number 3481731 or order online at etrailer.com. Free expert support on all CargoSmart products. Great prices and Fastest Shipping for CargoSmart Motorcycle Wheel Chock for E Track or X Track Systems - 7" Wide Tires. E Track reviews from real customers.
  • All Info
  • Reviews (144)
  • Q & A (0)
  • Related Parts
  • Photos

CargoSmart E Track - 3481731

  • E Track Wheel Chocks
  • CargoSmart

This wheel chock snaps into your floor-mounted E track or X track so you can stabilize your motorcycle on your trailer. Secure the wheel with a tie-down strap (sold separately). Steel construction is strong and corrosion resistant.


Features:

  • Wheel chock helps to stabilize the front or rear wheel of your motorcycle
    • Perfect for use on your utility trailer or in your enclosed trailer
  • Rubber pad on base helps protect your trailer floor from scratches and scuffs
  • Spring-loaded fittings snap into floor-mounted E track or X track anchor points
    • Chock can be easily moved from one E track or X track slot to another
  • Mounting holes let you permanently install chock on your trailer - hardware not included
  • Tie-down strap (sold separately) lets you secure front wheel to chock
  • Durable steel construction with black powder coat finish is corrosion resistant


Specs:

  • Application: tires up to 7" wide
  • Distance between fittings: 12"
  • Dimensions: 14-1/2" wide x 12" deep x 12" tall
  • Weight: 6 lbs
  • 1-Year limited warranty


motorcycle chockmotorcycle chock


1731 CargoSmart Removable Motorcycle Wheel Chock for E-Track or X-Track Systems - 7" Wide Tires







Customers Who Purchased This E Track Also Bought...



Customer Satisfaction Score:

Ratings & Reviews

4.7

144 reviews
5 Stars
(119)
4 Stars
(13)
3 Stars
(6)
2 Stars
(1)
1 Star
(5)
Review Sort Icon
by:
I haven’t hauled a motorcycle yet but after mounting I believe it will work perfectly for my needs. Feels very sturdy and strong.
by:
Quality of material and construction is great. It is too wide, my opinion, for the front tire on my Street Glide and my Goldwing. Will continue to search for a more narrow chock for this type E Track set up,
by:
Great products and thank you for this great service also
by:
Needs adjustment for flush track. Lower rubber bumpers ordered separately. Not plug and play. Pingel is better for this but faces the wrong way. Do not recommend for flush track. I made it work
by:
The packaging for this was amazing ! There was no way it was going to break out of the box !! It's going to be perfect for our customer. Thanks for sending it out so quickly.
by:
I used two of these on e-tracks in my enclosed trailer to help secure my Can-am Ryker. The work perfectly!
by:
Ideal for my Toyhauler. Track and wheel chocks give me many secure choices for loading multiple motorcycles.
Customer Large Image
Customer Image
Click to Enlarge
by:
This product worked fine. Had to cut the center bracket out so you get my bike tight to the front of the bracket
Customer Large Image
Customer Image
Click to Enlarge
by:
Items were well packed. Super Super Fast Shipping!!!! Very Happy * * * * *
by:
Like the product a lot. Easy to use.
by:
Very excited to use these all summer
Lazer S. profile picture
Etrailer Expert

Lazer S.

4/14/2026

Glad you like them, Jason! What are you going to be using them with?

Jason profile picture

Jason

4/14/2026

@LazerS. I sent my buddy up with some last year for his enclosed trailer so he could haul his and his wifes motorcycles. This year im putting them in my toy hauler for me and my wifes motorcycles
Lazer S. profile picture
Etrailer Expert

Lazer S.

4/14/2026

@Jason Nice! What do you guys ride? I had an 08 Fat Bob FXDF back in the day and would really like to get another one. That thing was a blast! ^___^
by:
I bought a toy hauler RV last January. I needed to be able to properly tie down two motorcycles in the garage. I bought the x-track and wheel choke. It works great! I can haul the bikes to my destination and once unloaded, I can remove the wheel chokes to use the garage without any obstructions. I recommend this product.
Mike profile picture

Mike

2/10/2025

Im still using this system and it continues to work well. I have other toy hauler owners look at the setup and comment that they are going to do likewise.

Kate F. profile picture
Etrailer Expert

Kate F.

2/10/2025

@Mike Hey Mike! What kind of bikes are you transporting with them? Glad you are out there inspiring others to do the same =)
by:
Got the chock and tracks installed in under 10 minutes. Great service and product.
by:
Does what it says it's going to do but I figured the front tire of the bike would actually touch the back bar of the chock. It sort of just rests up against the flat plate on the bottom. Not bad I guess, just not what I was expecting.
by:
Slick system and works very well for my Goldwings.
Customer Large Image
Customer Image
Click to Enlarge
Patrick profile picture

Patrick

12/6/2024

So far great! Very flexible that allows for many load options

by:
First off the shipping and packaging is awesome. I cannot tell you how many times we get damage/scratched or mangled parts delivered to us. The part is everything we needed plus I was pleasantly surprised at how much more sturdy this part was then the last product we used. We go to a lot or races through out the year and we do not have time for junk. The added bonus is the flexibility to move the chock to any location we need for maximum flexibility. Awesome product and I would highly recommend if you are transporting any type of motorcycle/dirt bike.
Richard profile picture

Richard

2/21/2021

After one year everything is still working awesome. The trailer has been filled with mud, rain and snow, and whatever else we pick up at the race events. The tracks have held up perfectly as well as the straps and buckles.We even have them holding our tool boxes against the inside walls during transport. I would highly recommend this system to everyone.....

by:
easy to install and the motorcycle wheel chock came o time thank you
by:
Love them. They work great.
Customer Large Image
Customer Image
Click to Enlarge
by:
This product works well for what it’s designed. Very easy to install.
Customer Large Image
Customer Image
Click to Enlarge
Customer Large Image
Customer Image
Click to Enlarge
by:
Have used several bike trips in my enclosed trailer with etrack. Works great, solid quality and makes loading and securing the bike.
by:
Just received the wheel chocks today and really excited to start using them - I'll update functional pros/cons later but this review is for etrailer customer service. THE BEST. I always know exactly where my order is at, shipping is fast, and follow-up to questions is always very expedient. etrailer is always the first place I look for trailer-related parts.
by:
Works great holds my race bike perfectly amazing speed on delivery awesome service
Customer Large Image
Customer Image
Click to Enlarge
by:
This wheel Chock appears to be quality manufactured. I liked how well my first one has performed that i bought another one. Easy to use. Holds front wheel secure. Locks into etrack easily and reposition quickly. etrailer.com shipped it lightning fast and was wrll packaged. i'll do business with them again!
by:
This is a heavy duty, well made wheel chock. I had a need to load multiple motorcycles on my trailer, and 1 would have to face backwards. I bought this wheel chock and the associated e-track so that it could be repositioned or removed quickly and easily. This one solves all of my problems, and looks good too.
by:
When the bike sits in the E Track they are not long enough to hold the bike correctly. Tire wants to always back out of it. Impossible to use bye yourself.
Would not recommend this set up.
25
144
true
Show More Reviews

See what our Experts say about this CargoSmart E Track

Do you have a question about this E Track?
  • B and W Biker Bar for Harley Street Glide and Ultra Models
    Hey Donnie, for all three of your Harleys the correct Biker Bar would be the part # BWMC2301. BUT we don't have a solution for the Indian. They only have options for Harleys at this time. I wish they would make options for other brands as this does come up. So to transport it you'd need something like E-Track # e95VR, Wheel Chock # 3481731, Tie-Down Ring # 59131, and Strap # EM59136. Think that would work for you?
    view full answer...
  • How Does The Brophy Angled Motorcycle Wheel Chock BR26MJ Mount?
    Hi Danny! Since the Brophy Angled Motorcycle Wheel Chock for E-Track # BR26MJ is meant to be about 14" off the ground for it to work the best, you will want to mount it on vertically oriented e-track. This also doesn't cant fore or aft or be turned, but can be angled right or left once mounted, so there really wouldn't be a way to mount it horizontally or on the floor. That would be an interesting way to do it though. I'll pitch that to Brophy and see what they say! If you are looking...
    view full answer...
  • Will Flint Hill Goods Adjustable Wheel Chock Fit 23" Diameter Tire
    Hi David; I'm sorry to say that is the overall diameter so a 21" diameter tire is going to be the max. Your Harley Touring tire will be too large for this wheel chock. At 7" wide the only standard wheel chock that will work is the CargoSmart Motorcycle Wheel Chock # 3481731. You will also need # e47HR for installation. I understand it is quite a bit more than either of these, but have you considered the B&W Biker Bar Motorcycle Tie-Down System for Trailers # BWMC2301? This is specifically...
    view full answer...
  • Will Biker Bar Fit 2022 Indian Chieftain Limited
    Hey Paul; B&W hasn't tested the 2022 Indian Chieftain Limited but it may fit the # BWMC2304. To find out if it will fit you will have to take some measurements. A two piece motorcycle tube frame is needed for the Biker Bar to clamp onto. The diameter of each frame tube must be at least 1.125" and no more than 1.5". Check that there is nothing hanging down below the tube frame, such as a motor, transmission or exhaust. With the rider sitting on the motorcycle, the distance from the side...
    view full answer...
    Image 1 for
  • Tie Down System for Securing Honda Goldwing
    Hey Michael, To secure your Honda Goldwing I would recommend you get two sets of the CargoBuckle Mini G3 Retractable Ratchet Straps # IMF103745-86. The combined capacity of 4 of these straps would work well for securing your trike to the trailer. These straps have a Safe working load limit (WLL) of 466 lbs and a max load rating of 1,400 lbs. For a wheel chock you could use the part # 3481731 which mounts in e-track like the part # e25VR which you could also use with anchors like part...
    view full answer...
  • Motorcycle Wheel Chock for 2023 Cruiser RV MPG Toy Hauler
    Hi Jeremy; drilling is going to be the only real choice to install a wheel chock in your 2023 Cruiser RV MPG Toy Hauler. If you don't want to use a wheel chock like the # TWSPWM you looked at you could get the CargoSmart Motorcycle Wheel Chock for E Track or X Track Systems # 3481731. This will be a little different and won't have the screws sticking up when you remove it. However, you will need to either install a piece of X Track # 3481787 or use two E Track Anchors # SLSB. There are...
    view full answer...
  • Will Biker Bar Fit 2011 Harley Superglide Custom
    Hi Eric; B&W doesn't have specific fitment information for a 2011 Harley Superglide Custom. However, you may be able to use the B&W Biker Bar # BWMC2304. To find out if it will fit you will have to take some measurements. A two piece motorcycle tube frame is needed for the Biker Bar to clamp onto. The diameter of each frame tube must be at least 1.125" and no more than 1.5". Check that there is nothing hanging down below the tube frame, such as a motor, transmission or exhaust. With the...
    view full answer...
  • Can I Tie Down My Harley Davidson With the CargoSmart Horizontal or Vertical X Track?
    Hello David, Yes, but you will need to check your tire size. In order to tie down a Harley on the CargoSmart # 3481787 you will want the CargoSmart Motorcycle Wheel Chock for E Track or X Track Systems - 7" Wide Tires # 3481731. It looks like this will work with some of the standard tire sizes that Harley uses but not all of them. The standard tire size is 130 mm (5.1 inches) - 240 mm (9.4 inches). As long as your tire is 130 mm (5.1") or the 150 mm (5.9 inches) it will work. If you have...
    view full answer...
  • Is There Biker Bar For Indian Super Chief Limited
    Hi Kristi, B&W does not make a Biker Bar for your Indian Super Chief Limited, so to transport it you'd need something like E-Track # e95VR, Wheel Chock # 3481731, Tie-Down Ring # 59131, and Strap #EM59136.
    view full answer...
  • E-Track and Parts Needed For Securing Motorcycles In a Enclosed Trailer
    Yes, you can place the etrailer Horizontal E-Track # e25VR across your trailer from side to side. This will allow you to use the CargoSmart Motorcycle Wheel Chock # 3481731 making it easier and safer to secure your bikes in your trailer. Be sure to use the etrailer E-Track Backing Plates w/ Hardware # e46RR to secure each of the 5' tracks in place. Each of these kits includes 3 brackets for each track. I recommend using the Erickson E-Track Tie Down Rings # 59131 and Cam Tie-Downs # EM05729...
    view full answer...
  • Distance Between Mounts of CargoSmart Motorcycle Wheel Chock # 3481731
    The X-track fittings of the CargoSmart Motorcycle Wheel Chock # 3481731 that you referenced are separated by 12 inches.
    view full answer...
    Image 1 for
  • Recommended Motorcycle Wheel Chock For a Trailer With E-Track Ran Length Wise
    Rather than using the CargoSmart Motorcycle Wheel Chock # 3481731 and having to install different E-Track # SLSB mounts onto your floor you should consider the Wheel Chock # EM07506. This chock cradles the front tire which allows the bike to sit more steady while you are connecting Straps # 297-7RSBB-M. You can have Fittings # SLAEI welded to a custom plate which can fit the above chock so you will not have to add additional mounting points.
    view full answer...
  • Can I Use the Erickson E-Track Wheel Chock with 180mm Wheels
    When you convert the width of your 180mm tire into inches, it's going to be 7.08", and the E-Track Wheel Chock # 3481731 is designed to handle a maximum of 7" tires and you're going to be right at the cusp. Since we're dealing with 1/100ths of an inch in this case, I do believe that you'll be able to make it work, but it's going to be a snug fit. I do recommend also using the Erickson E-Track Straps # EM59136 to further secure your bike in this setup, as well.
    view full answer...
    Image 1 for
  • Can E-Track Install on Metal Utility Trailer Floor
    Yes you can install e-track like the # E19148 on a metal utility trailer like you have and it would work great with the motorcycle wheel chock part # 3481731 you referenced if that's what you were considering as well.
    view full answer...
  • What is the Weight Capacity of the CargoSmart Motorcycle Wheel Chock for E-Track Systems
    I reached out to CargoSmart and found that there is no weight capacity rating for the CargoSmart Motorcycle Wheel Chock for E-Track or X-Track Systems # 3481731 since it is only meant to stabilize your motorcycle. The limiting factor would be the E-track in this case. Assuming you are using the single slot E-track tie-down points like the Snap-Loc E-Track Tie-Down Anchor # SLSB you shouldn't have any problems. Although I do not know the capacity of what you have, each of these has a safe...
    view full answer...
  • Does E-Track Have to be Certain Distance From Wall to Use Motorcycle Chock
    The CargoSmart Motorcycle Wheel Chock for E-Track or X-Track Systems - 7" Wide Tires # 3481731 is about 12 inches deep (front to back) so I recommend putting your CargoSmart X-Track Rail like the 2 foot # 3481769 or 5 foot # 3481770 at least 6 inches away from the wall in front of it and horizontally however much more room you need for your handlebars not to touch the wall. I have added links to video reviews of the wheel chock and X-track for you to check out.
    view full answer...
  • E-Track Parts to Secure Side By Sides and Dirt Bikes
    You can install the etrailer Horizontal E-Track # e62VR and drive over it just fine with a vehicle as the tracks only sit 1/2" tall - then you can secure your side by sides with a tie-down kit like part # EM98CV you were looking at. To secure the front wheel of your dirt bikes I recommend picking up a few of the CargoSmart Motorcycle Wheel Chock # 3481731 as well as a few of the single E-Track connections # SLSZ since the wheel chock connection points won't be as far apart as what you'll...
    view full answer...
  • E-Track and Motorcycle Wheel Chock Recommendation for Securing Motorcycle to Trailer
    That sounds like a great plan, the E-Track part # E19148 will provide a great tie-down point for securing the motorcycles. For tie-down rings you would want the # 59131 and then for a wheel chock I would recommend the # 3481731 because of how well it secures motorcycle and how easy it is to use. Check out the review video I attached for more info.
    view full answer...
  • Will 5-Inch Wide Tire Fit CargoSmart E-Track Motorcycle Wheel Chock 3481731
    CargoSmart Motorcycle Wheel Chock # 3481731 will accept tires up to 7-inches wide but if you refer to the linked photo you'll see that the chock's wheel hoop has a slight taper. 1-inch from the hoop's apex the inside width is approximately 5-1/2-inches, perfect for your tire; 2-inches from the apex it is 6-1/2-inches and all the way out at the opening this width is 8-inches. Since you'll be using some type of tie-down straps to help secure the motorcycle anyway, items such as E-Track parts...
    view full answer...
    Image 1 for
  • Can CargoSmart Motorcycle Wheel Chock for E-Track or be Used with 3 inch Wide Tires
    The CargoSmart Motorcycle Wheel Chock for E-Track or X-Track Systems # 3481731 that you referenced was designed to fit tires up to 7 inches in width but it will work with a bike that has a 3 inch wide tire assuming it's tied down properly.
    view full answer...
  • Will Biker Bar Fit Indian Pursuit 23
    None of the Biker Bars will fit your Indian Pursuit since it lacks the two piece tube frame to clamp onto. I recommend adding some E-track like # E19148 and then using some tie down rings # 59131, straps # EM59136, and a wheel chock # 3481731 to secure your motorcycle.
    view full answer...
  • Is There an E-Track Wheel Chock Designed To Fit Bicycle Tires?
    The CargoSmart Wheel Chock # 3481731 is only currently offered in a size which fits most front motorcycle tires. You might consider using something like the 3 Bike Floor Stand # S64018 if you are transporting multiple bikes. You could adapt it to fit into the E-Track by welding the rack to some Fittings # e59HR.
    view full answer...
  • How Many Holes Get Drilled to Install the CargoSmart Wheel Chock # 3481731
    According to the installation instructions you will use 4 attachment points when installing the CargoSmart Motorcycle Wheel Chock for E-Track or X-Track Systems - 7" Wide Tires Item # 3481731 to your trailer. So you will need to drill 4 holes. I recommend adding the Snap-Loc E-Track Tie-Down Anchor - Square Mounting Hole - Bolt On - 1,000 lbs - Matte Zinc - Qty 1Item # SLSZ to attach the chock to the floor of your trailer.
    view full answer...
  • Types of Motorcycle Wheel Chocks Available
    We do have wheel chock for motorcycles. If you have e-track in your trailer the CargoSmart Motorcycle Wheel Chock # 3481731 will snap into the track allowing you to easily remove it when not needed. The Tow-Rax Removable Wheel Chock w/ Wood Screws # TWSPWC is a more basic chock. It includes mounting screws for securing to wood floors used on several utility trailers.
    view full answer...


< Previous
12
Next >



Do you have a question about this E Track?


Info for this part was:

Employee Tyler C
Edited by:
Tyler C
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Joshua S
Video Edited:
Joshua S
Employee Dustin K
Video Edited:
Dustin K
Employee Cole B
Installed by:
Cole B
Employee Adam E
Installed by:
Adam E
Employee Wilson B
Updated by:
Wilson B
Employee Matthew S
Updated by:
Matthew S
Employee Alex H
Updated by:
Alex H
Employee Erin H
Written by:
Erin H
Employee John S
Video by:
John S

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.