How Does The Brophy Angled Motorcycle Wheel Chock BR26MJ Mount?
Updated 03/05/2026 | Published 02/13/2026
Products Featured in This Question
Question:
Does the clip use a vertical or horizontal track?
asked by: Danny C
Expert Reply:
Hi Danny!
Since the Brophy Angled Motorcycle Wheel Chock for E-Track # BR26MJ is meant to be about 14" off the ground for it to work the best, you will want to mount it on vertically oriented e-track.
This also doesn't cant fore or aft or be turned, but can be angled right or left once mounted, so there really wouldn't be a way to mount it horizontally or on the floor. That would be an interesting way to do it though. I'll pitch that to Brophy and see what they say!
If you are looking for something that would be floor mounted, something like the CargoSmart Motorcycle Wheel Chock for E Track or X Track Systems - 7" Wide Tires # 3481731 may be the better way to go. You would still want the e-track running vertically along the trailer floor though (see included image).
Are you looking at this for an enclosed trailer or an opened one?
(click to enlarge)
Product Page this Question was Asked From
Continue Researching
- Search Results: e track
- Search Results: e track
- Search Results: e track motorcycle
- Search Results: e track motorcycle wheel chock
- Search Results: car tie down straps
- Search Results: motorcycle carrier hitch cargo carrier
- Search Results: e~track screws
- Shop: Brophy 2-Slot Horizontal E Track - Zinc Plated Steel - Qty 1
- Shop: Erickson E Track Tie-Down Kit w/ 4 Ratchet Straps with Roller Idlers and 2 Wheel Chocks - 1,100 lbs
- Shop: Brophy Angled Motorcycle Wheel Chock for E-Track
- Shop: etrailer E Track Wheel Tie Down Straps w/ Roller Idlers - 2" x 12' - 1,100 lbs - Qty 2
- Video: etrailer Horizontal E Track Spec Review
- Video: Comprehensive Review: Ultra-Fab Dirt Bike Carrier for 2" Hitches
- Shop: Ultra-Fab Dirt Bike Carrier for 2" Hitches - With Ramp - 77" Long - 500 lbs
- Shop: CargoSmart Spare Tire Mount for E Track and X Track Systems
- Shop: etrailer E-Track Backing Plates w/ Hardware - Galvanized Steel - 6" Long x 6" Wide - Qty 4
- Q&A: Is the Kenda Karrier KR53 ST205/75R15 Radial Trailer Tire Rated for Long Road Trips on the Highway?
- Q&A: Is E-track Stronger Than X-track, Is There An Advantage Of One Over The Other
- Article: How to Install E-Track in 3 Easy Steps
- Q&A: No Signal And PWM Fix For Furrion Vision S Camera System Connected To 2022 GMC
- Q&A: How to Attach E-Tracks to a Wooden Trailer Floor
- Q&A: Maximum Tongue Weight for B&W Digital Tongue Weight Scale
- Q&A: 2022 Ford F-150 Raptor Blue Ox Flat Tow Part Recommendations
- Q&A: Options For Replacing An Elixir ELX-60 Converter
- Article: Trailer Wiring Diagrams
- Article: Best Bike Racks for Fat Bikes
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: How (and Where) to Connect an RV Propane Grill
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: How to Measure for Trailer Hitch Drop
Danny C.
3/2/2026
After looking at this in my enclosed trailer, it looks like it needs to be mounted at the 14" position but the track itself would need to be mounted horizontally since it takes two slots on the track. I'll purchase a few of the two slot horizontal track and mount that on the front trailer wall to mount this. Thanks, Danny