To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.
Features:
Specs:
Installation
This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights. You will have to remove the tail light assemblies to access this harness.
Once you've plugged in the T-connector, run the hot lead up to your car battery. Connect the lead to the included fuse holder, and then connect the fuse holder to the positive terminal on your battery and insert the provided fuse.
Once installation is complete, the 4-way connector will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket (sold separately) is recommended to keep the connector secure.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
A ModuLite power module is built into this T-One connector. Because your vehicle runs on a multiplex wiring system, the wiring needs to be converted to be compatible with the wiring system of your trailer. This power module functions as a tail light converter to combine the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.
With a ModuLite, your trailer's lights will be powered without overloading your vehicle's electrical system. Because the module draws power directly from your car's battery and bypasses the electrical routes that are used by a basic wiring harness, there is virtually no draw on your tail light circuits.
California residents: click here
Average Customer Rating: 4.8 out of 5 stars (104 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.You will need a car lift to install the harness. You must raise and lower the vehicle at least 3 or 4 times. The last being to snake the power lead to the vehicle battery in a way so as not to pinch or burn it.I went to an auto electric shop to have it installed.
The install of this wire harness went very smooth after watching the video. The step by step narration made wasneasy to follow. It took about 2 hours in my driveway. The materials provided are all good quality too.
I needed this wire harness to pull a trailer with the hitch that I got and installed from Etrailer a few years ago. I have been using the hitch for a bike rack which has been very handy and solid. Great products that are simple to install at home!
Super fast shipping, all parts arrived! The how to videos are spot on! Only thing I didn’t like is what’s in this pic, a bare spot on the molding process I reckon. I covered with tape and sealer. Cheers
Hitch is excellent, installation was straight forward quality is good. Purchased ball mount and ball to go with. Don’t forget the hitch pin like I did.
The lighting adapter kit was a bit of a disappointment. It works but installation was not easy on the Chevy Equinox. I was surprised to find that the controller requires 15 amps of power from a direct battery connection. I have installed trailer wiring on other vehicles that did not need battery power.
etrailer has good selection and pricing, shipping was fast and free. I recommend etrailer without reservation.
I'm so impressed by the fulfillment of my order. My packages was shipped the same day I ordered it. I live in California. The estimated delivery date was the 8th and I received it on the 5th because they literally had order on a truck the exact same day I ordered it. It even told me who filled my ordered with a photo of the people next to it. I haven't tried to install it yet (ok fine it's my step dad doing it for me lol) but I'm sure it'll be fine because the website makes it easy to find the right product for your vehicle. Very impressed!
etrailer does an excellent job with their installation videos. It made installation super easy. Thank you etrailer!!
It will no fit my vehicle and this is the second one I have tried
Quick shipping. Great instructions.
I have actually had one installed since 2018 but due to an electrical problem in the trailer (short) it damaged the module. Thats good because it protected the cars electrical system from any damage. Once I replaced the module everything is working great again!
The only problem I had was not knowing that there’s two different harness for one type of car and I only found out after. I started running wire
Installed the hitch on my 2020 LT1 Equinox. Easy install if you read the instructions and watch the video before you begin the install.
I love the hitch and the wiring connector I ordered. It worked perfectly!!
Worked out great instructions were perfect and qll parts needed were quality and appropriate
Very easy installation!
Works Great
This is the 3rd order from etrailer and have never had a problem. The hitch was easy to install but you will need two people to hold the hitch in place while you put a couple bolts in place to secure it. I do not have a lift but using a jack and some stands will work just as well. My son and I were able to install it in just about 75 minutes. The online videos were perfect and document each step of the process. I also purchased a light kit as well but did not have the chance to install that yet. I will be doing that down the road and will let you know how I make out.
I was told by a hitch installer that the hitch I was looking for would not be available for 3-4 weeks. I found the hitch on etrailer.com. ln three days the hitch was on my porch, along with the wiring harness. Had it installed the next day. Very pleased with the service. The information shown on the site and the videos were very helpful. Will definitly be back and will recommend etrailer.com to my friends!
Chevrolet used different electrical connectors on different configurations of the same vehicle, such as on the Equinox, they used different wiring connectors on the LS, LT and Premier and whether or not the vehicle was delivered with a hitch, or not, and some had a built in wiring connector for subsequent trailer wiring, or not, and diesel powered units may or may not. Obviously this is confusing and I ordered the wrong kit for my application. I have a diesel LT. etrailer communicated extremely well and we solved the problem quickly, exchanging the first kit with the correct one. Great people. I thank Carol and Odelia
Tyra F from etrailer personally called me to inform me I ordered the incorrect wiring harness and mount for my hitch I ordered for my SUV. She assisted me in ordering the correct parts and helped me figure out the best shipping option for my needs. Will definitely recommend etrailer based solely on their high level of customer service!!
I was really surprised on how easy everything went together. The included fishing tools made an impossible task simple.
I purchased the trailer hitch & wiring harness for my 2020 Chevy Equinox, deliver was fast, all parts that were needed were included, couldn’t ask for it to go any smoother
Installed perfectly on my 2020 Equinox.
From the time I talked to the sales rep to the time my product was delivered, I experienced class act customer service and it was a speedy delivery. I was well satisfied.
I put this on a 2019 equinox it works great but did take me about 2 hours to get it wired thru the car to were it wouldn't be pinched by anything. But it works great.
Good quality and straight forward install. The one thing I would have changed is the length of the lead wire from the control box to the drivers side tail light patch connector. All the other harness sections have more than adequate length, but in order to get enough slack in the lead to the drivers side connection, I had to tear off and re-place the control box up higher on the body in an area that is not as flat and suitable to mount it. 2 or 3 more inches on that lead wire would have made it so the box mounts very nicely on the lower flat side of the rear body rail. All in all, a good product, just might need a tweak to fit the new Equinox perfectly
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.