To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. Connector plugs directly into existing wiring. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.
Features:
Specs:
Installation
This custom-fit T-connector plugs into your vehicle's wiring harness, which is located behind the rear bumper. Once you've plugged in the T-connector, attach the included fuse holder to the positive terminal on the truck's battery. Then locate the truck's power wire on the driver's side of the engine compartment, and plug the fuse holder into the matching connector on the power wire.
Once installation is complete, the 4-way connector will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket (sold separately) is recommended to keep the connector secure.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
A tail light converter is built into this T-connector. This converter is a circuit-protected, battery-powered unit that bypasses the electrical routes that are used by a basic wiring harness. As a result, there is virtually no draw on your tail light circuits.
Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of the trailer. This converter combines the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.
Curt builds each tail light converter using surface-mount technology (SMT). This method of construction involves soldering electronic components directly to the surface of a printed circuit board. SMT eliminates the need for leads, which are used in older through-hole technology. The result is a circuit board that is smaller yet provides more routing area and that offers superior performance, reliability and durability.
Circuit boards constructed using SMT have been shown to perform better under rough conditions with excessive vibration than those made using the through-hole method. And where would vibration be more likely to occur than in towing applications? Curt converters also produce less heat, leading to increased durability and longer life. In addition, lower levels of resistance ensure better performance, especially for parts that operate at higher frequencies.
Each Curt circuit board is made using high-quality components that are pieced together in the most technologically savvy fashion, leading to greater predictability and reliability in functioning.
California residents: click here
Average Customer Rating: 4.7 out of 5 stars (36 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. Connector plugs directly into existing wiring. Powered converter reduces strain on wiring system and is made using SMT to ensure superior performance.Got the exact replacement part at a good price, and it arrived on time. Ordered over the phone e-z peezie
After tons of problems and hours of install, troubleshooting and repairs to my previous trailer and truck wiring, I finally ordered the exact fit 'plug and play' version of the wiring kit to replace the splice-in type from local auto parts store. It took about 15min. total to install in the dark. Where instructions were slightly too brief, etrailers website video clarified. Lights on trailer are brighter than they've ever been, previous bad grounding problem is solved and I'm looking forward to the fuse protected circuit saving me from buying more replacement converters in the future.
Why is it when I order a 50lb hitch, I receive it in world class 1 day time. When I order 1/2 lb wiring harness it takes longer than the pony express 8 day time. Products have always been first class and shipping usually is first class as long as the wiring is ordered with the hitch.
The product fit perfectly as stated. Made the job very easy. My only reasons for not giving it a 5 star are 1 the kit did not come with any dielectric grease nor a picture showing where the 12v factory connection was, I found that on another site ( Its right next to the bsttery ).But as far as fit and ease of insulation I would give it a 5 star.
Timely shipping, Great product,Fair price. Excellent service. A pleasure to do business with.
Curt trailer wiring kit has good connectors and was easy to install into factory setup on my Tundra.
Quick shipping. Easy installation. Haven't had a chance to use it with a trailer yet, but it appears to be working after checking it with my test light. Took longer to move the battery, route and secure the cables under the hood than to actually plug both pieces in as directed by the instructions. Total install time was about 90 minutes.
Worked perfectly, should have ordered this along time ago. Took me 10 minutes to install. Customer service was great too. Thanks for a great product.
After purchasing two of another brand, since discontinued, I found the Curt product. The others failed within 6 months and after a year the Curt product still works fine. Just plug in and go. Couldn't be easier. Good product!
Worked for about two months and 2 trailer pulls then quit working
Easy to complete the online purchase, good value, shipped timely, product was exactly what it was represented to be and of good quality. I would do business wth etrailer again.
Fits perfectly and easy to install. I would highly recommend it.
It's pretty simple really the easier you make it to order something and the quicker you get it the more satisfied customer you have that is what you did
Great product and instructions easy to reference.
CONGRATULATIONS !
THIS HARNESS NEAT, COMPLETE, AND A TREAT TO INSTALL.
WILL BE GLAD TO RECOMMEND TO ANYONE.
REGARDS, "SMILES"
Fit perfectly, easy install. Fixed my problem.
Everything was incredibly easy to replace and works top notch.
Zac
8/23/2022
One year later and everything works great. It was easy to insta and held up nicely.
A snap to install w/ included instructions.
Came in a timely manner and well packaged. Exact fit as described, will have to test it out to make sure it works but everything looks good!
It works great. Have had no issues!!!
Still on my vehicle and and working gre at
This worked perfectly!! Easy to install, fit like a glove, and was worth every penny! Which was priced very reasonable.
The kit included everything; very pleased; quality product.
thinks! it was a perfect fit. very simple to hook up. every thing worked as well. carson jones
Lori was very helpful.and the product work perfect.thankyou
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Frank
2/24/2018
It shortened out and blew fuses in my truck so I had no turn signals and flashers. About a month ago I had to purchase another one and installed it. Easy to install but thought it would last longer.