To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
These 1,000-lb capacity truck bed rail tie down anchors stay out of the way when you don't need them and snap up when you want to haul. They give tie downs a better angle of pull than factory anchors and are easier to reach.
Features:
Specs:
Whether you have open stake pockets or pop-out rail caps, it only takes a few seconds to install these BullRing anchors. All you have to do is pop the caps off using a flat head screwdriver, insert the anchors into the stake pockets, and tighten them down with a Phillips head screwdriver.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody, Andy here with etrailer.com. And today we're gonna take a look at these BullRing Raised Fit Retractable Tie-Down Anchors for your Truck Bed Stake Pockets. These heavy duty anchors are going to attach to your truck bed stake pockets and provide tie-down points to secure your load, working with S-hook and J-hook connections. Now, these are custom fit anchors that are going to fit the 2000 to 2006 Toyota Tundra, the 2007 to 2013 Toyota Tundra double cab and regular cab. And I do wanna mention that these will fit access cab models with pop-out rail cab covers, but they will not fit crew max models with four full doors. To confirm that these are going to fit your truck, take advantage of our vehicle fit guide here at etrailer.com and insert the year, make, and model of your truck, and our fit guide will let you know if these will work for you, or if we have something comparable that will work for you.
Now, while factory anchor points are inside the bed of your truck, they can be hard to reach. These retractable anchor points are going to install into the stake pockets on top of your bed rails. And then you can just simply pop the anchor ring up when you want to use it to secure a load. And then when you're done, you just push it down firmly and it'll be flush and they'll be out of your way, and that's how easy these are to use. So again, let me demonstrate this for you.
You're just gonna pull this ring up firmly and you hear that click, that means that it is secured tightly in place. So you're not gonna have to worry about this ring slipping down accidentally when you're using it. And then when you are done using this you just push this down firmly and it's going to push down flush with the body of this anchor and it's gonna be completely out of your way. So very simple to use. This raised fit is going to sit just above your bed rail.
Now, these anchors have a weight capacity of 1,000 pounds and they are constructed of stainless steel that will resist rust and corrosion. And the nylon lower body is going to reduce sound. And these are going to match the grain and color of your Toyota truck bed rails, giving it that nice factory look. Now, not only are these gonna be very easy to use but they're gonna be very easy and very quick to install and really requires nothing more than your Phillips head screwdriver. So to install these you're just going to remove any plastic caps that covers the stake pockets on your Toyota.
And then you're gonna use your Phillips screwdriver to loosen these two screws in the anchor so that the steel plate can drop down. Now, I went ahead and already loosen these screws before our time together, so we go ahead and remove them. And then when I grab a hold of this top cover you see that that steel plate is just hanging there. It is ready for this to be inserted into your stake pocket. I do wanna mention that this will not become detached from the ring. It is there permanently. So you're not gonna have to worry about this plate becoming disconnected and losing it in your stake pocket. So holding the top cover, you're just going to guide the anchor into the stake pocket at an angle. And then you're going to pull up on the cover catching the lower bracket on the truck sheet metal and then hold the ring and allow the cover to drop into place. Then you're just going to replace these screws and take your screwdriver and just simply hand-tighten them. Don't over-tighten them. If the plastic rail cap is starting to bend or bow then that means you are making them too tight. So very easy, very quick installation. Now, you are going to get four tie-down anchors, and these do have a lifetime warranty. And overall, I am very impressed with these. They are, in my opinion, very well built and they feel very robust and they feel like they're going to be able to take quite a bit of punishment. And again, I'm very impressed with the ease of use, but even more than that, the ease of installation. Once you get these, you're gonna have these installed in no time and they're gonna be ready to go. But that's gonna conclude our look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me..
Average Customer Rating: 5.0 out of 5 stars (4 Customer Reviews)
These 1,000-lb capacity truck bed rail tie down anchors stay out of the way when you don't need them and snap up when you want to haul. They give tie downs a better angle of pull than factory anchors and are easier to reach.I installed two of the 4 in be side of my truck. No instructions but pretty simple to figure out. Just take out the two bolts, fit the bullring in place and tighten down the bolts. Easy as pie. MY truck is a 2007 Toyota Tundra Limited edition in Mint shape. This adds to the truck.
Great fit and easy installation. These work well.
I love this product and the customer se rvice!
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.